Search found 154 matches

by BoBaCk1
Fri Nov 14, 2014 7:13 pm
Forum: KA-T Tech. Advanced
Topic: Mazworx z32 trans swap users help needed.
Replies: 54
Views: 18152

Re: Mazworx z32 trans swap users help needed.

So to update I removed the tranny and saw nothing obvious wrong. I drilled and added 2 alignment dowels to my adapter plate. I left the dust plate on. I drilled 5 holes the size of a quarter all around the bellhousing while leaving the starter plate cover off. So there shouldn't be heat build up. It...
by BoBaCk1
Fri Nov 14, 2014 9:35 am
Forum: Dyno Results
Topic: 900whp/678wtq @ 42psi
Replies: 83
Views: 39530

Re: 900whp/678wtq @ 42psi

I think I remember him saying he's using a spec twin disc and a z32 trans.
by BoBaCk1
Fri Nov 14, 2014 7:04 am
Forum: Dyno Results
Topic: 900whp/678wtq @ 42psi
Replies: 83
Views: 39530

Re: 900whp/678wtq @ 42psi

wish we had more high power ka-t's in Houston. People still can't believe that my ka makes 700hp lol. They think all ka-t's blow up at 400hp, the ignorance :D .
by BoBaCk1
Wed Nov 12, 2014 1:02 pm
Forum: Dyno Results
Topic: 900whp/678wtq @ 42psi
Replies: 83
Views: 39530

Re: 900whp/678wtq @ 42psi

Man great job bro. You just keep setting the bar higher and higher lol. When you did the 800 whp were you on standard wrist pins? And how long did you run it on that set up?
by BoBaCk1
Sat Nov 08, 2014 10:34 pm
Forum: KA-T Tech. Advanced
Topic: Mazworx z32 trans swap users help needed.
Replies: 54
Views: 18152

Re: Mazworx z32 trans swap users help needed.

Let me know how it goes supa. It seems me and your friend have the exact same issue.
by BoBaCk1
Fri Nov 07, 2014 5:24 am
Forum: KA-T Tech. Advanced
Topic: Mazworx z32 trans swap users help needed.
Replies: 54
Views: 18152

Re: Mazworx z32 trans swap users help needed.

No the line doesn't touch the manifold. It's very possible it's a heat issue. So I'm gonna do some things to test that theory. It's just weird that my ka trans never did this at the same power level I'm at now but my z32 trans is doing it.
by BoBaCk1
Thu Nov 06, 2014 6:59 am
Forum: KA-T Tech. Advanced
Topic: Mazworx z32 trans swap users help needed.
Replies: 54
Views: 18152

Re: Mazworx z32 trans swap users help needed.

yeah its possible. The only thing is this issue only happened once I went to the z32 trans. everything was the same on my car with the tranny swap. Same clutch and flywheel, master, and slave. only once tranny was swapped did the issue occur. That's why I made this thread to see if anyone else had t...
by BoBaCk1
Wed Nov 05, 2014 8:43 pm
Forum: KA-T Tech. Advanced
Topic: Mazworx z32 trans swap users help needed.
Replies: 54
Views: 18152

Re: Mazworx z32 trans swap users help needed.

No I don't have those brackets either. I've changed both master and slave, changed to a twin disc clutch, bled many times, adjust master rod, and used high temp brake fluid. It's still the same. I'm about to drop the trans again and see what's up. I thought I was the only one with this issue. I also...
by BoBaCk1
Wed Nov 05, 2014 7:51 pm
Forum: KA-T Tech. Advanced
Topic: Mazworx z32 trans swap users help needed.
Replies: 54
Views: 18152

Re: Mazworx z32 trans swap users help needed.

His pedal sinks also supakat?
by BoBaCk1
Wed Nov 05, 2014 5:34 pm
Forum: KA-T Tech. Advanced
Topic: Mazworx z32 trans swap users help needed.
Replies: 54
Views: 18152

Re: Mazworx z32 trans swap users help needed.

Sweet bro, I'm using a stock z32 shifter so no buzzing for me lol.
I'm still trying to figure this issue out. It's got to the point that I'm thinking it's a trans to block alignment issue or spacing issue. That's why I asked if your running that plate still.
by BoBaCk1
Wed Nov 05, 2014 2:34 pm
Forum: KA-T Tech. Advanced
Topic: Mazworx z32 trans swap users help needed.
Replies: 54
Views: 18152

Re: Mazworx z32 trans swap users help needed.

How about the dust plate that goes in between the engine and transmission. Are you guys using the plate still or did u take it off?
by BoBaCk1
Fri Sep 12, 2014 9:14 pm
Forum: Drag Racing
Topic: Gear ratio question?
Replies: 11
Views: 12022

Re: Gear ratio question?

Hope to see your results. I too am in between keeping my 3.90 j30 diff in or swapping to my 3.69 q45 diff.
by BoBaCk1
Sat Aug 23, 2014 7:44 am
Forum: KA-T Tech. Advanced
Topic: Mazworx z32 trans swap users help needed.
Replies: 54
Views: 18152

Re: Mazworx z32 trans swap users help needed.

Yeah I have the same clutch setup as you. I guess my clutch is bad or something is wrong with the way the transmission is sitting against the motor. And we should tell mazworx about the crossmember deal. After hearing about yours that make 3 times I have heard about the mazworx trans crossmembers no...
by BoBaCk1
Thu Aug 21, 2014 9:16 pm
Forum: KA-T Tech. Advanced
Topic: Mazworx z32 trans swap users help needed.
Replies: 54
Views: 18152

Re: Mazworx z32 trans swap users help needed.

Yes I had to modify my crossmember from mazworx also. Didn't fit worth a damn. I could have fabricated one for less and better quality but I didn't want to mess with it. I was under the assumption that it was a bolt on affair. I was wrong lol. What transmission are you using n/a or TT. Did you have ...
by BoBaCk1
Tue Aug 19, 2014 9:25 pm
Forum: KA-T Tech. Advanced
Topic: Mazworx z32 trans swap users help needed.
Replies: 54
Views: 18152

Mazworx z32 trans swap users help needed.

Just asking anyone who has done the z32 trans swap using mazworx kit ever run into the same issue I'm having. I first started to notice at high rpm while doing a 2nd gear roll my pedal would sink. Try to grab 3rd it grinds and the pedal is stuck down like it only moves back up 2 inches. Put it in ne...
by BoBaCk1
Sun Jul 13, 2014 8:48 am
Forum: Dyno Results
Topic: 6466 28PSI
Replies: 44
Views: 27252

Re: 6466 28PSI

Any updates on this beast bro?
by BoBaCk1
Mon Jun 23, 2014 9:32 pm
Forum: KA-T Picture Threads
Topic: 2FAS240's build thread
Replies: 184
Views: 74714

Re: 2FAS240's build thread updated on 10 June 2014

How is your shifter position with the mazworx z32 kit? Got any pics? Did u have to cut the shifter area? Loving the build and your build thread.
by BoBaCk1
Wed Jun 04, 2014 7:20 pm
Forum: Dyno Results
Topic: 6466 28PSI
Replies: 44
Views: 27252

Re: 6466 28PSI

I actually am using proefi, and I love it lol. Of course I'm gonna be biased and say if you have a good tuner that can tune and set up proefi, go with that. I actually got to tune and drive my car last night. Proefi' traction control is amazing. I feel so confident with the car. I'm actually getting...
by BoBaCk1
Sun Jun 01, 2014 9:20 am
Forum: Dyno Results
Topic: 6466 28PSI
Replies: 44
Views: 27252

Re: 6466 28PSI

^ that's how I have my car set up right now. Should be testing it soon. I bought a front hub and bearing assembly for an abs s14 and installed a sensor to it. Then for the rear I'm feeding of the vs sensor. As soon as the computer senses the different speeds between front and rear it knows it's losi...
by BoBaCk1
Sun Jun 01, 2014 8:53 am
Forum: Dyno Results
Topic: 721whp 552tq @ 27psi
Replies: 19
Views: 12227

Re: 721whp 552tq @ 27psi

Damn nice numbers bro. People bringing out the big guns lately on ka-t.what turbo manifold are u running? I'm assuming it a t4 turbo?
by BoBaCk1
Mon May 26, 2014 3:53 pm
Forum: KA-T Picture Threads
Topic: Supakat's Thread
Replies: 1796
Views: 473753

Re: Supakat's Thread

I'm curious to see the difference it makes on your car. My car made right at about 700hp with a stock Intake and stock throttle body on 30 psi. I just installed an xcessive intake and a rx8 drive by wire throttle body, it's 75mm. I didn't want to go to big. I'm not convinced that our motors need tha...
by BoBaCk1
Fri Apr 25, 2014 9:31 pm
Forum: Dyno Results
Topic: 6466 28PSI
Replies: 44
Views: 27252

Re: 6466 28PSI

That's nice to hear That's the turbo I was thinking of upgrading too. my Ecu is called proefi and the traction control strategies are really nice. Plus it also has boost by speed and time also.
by BoBaCk1
Fri Apr 25, 2014 4:16 pm
Forum: Dyno Results
Topic: 6466 28PSI
Replies: 44
Views: 27252

Re: 6466 28PSI

That's good bro sometimes to be successful you have to take risk so I applaud you for making the leap of faith. Yeah I have a lot of fun driving around on 20 psi. I've beaten 2 600cc bikes so I'm happy. I've been thinking of upgrading my turbo also but I'm gonna try and push this 6262 to its limits....
by BoBaCk1
Fri Apr 25, 2014 4:24 am
Forum: Dyno Results
Topic: 6466 28PSI
Replies: 44
Views: 27252

Re: 6466 28PSI

Is the turbo t3 or t4? What's the motor consist of? Upgraded wrist pins. Very nice build and power you have here. I was wondering where you've been.you been busy I see lol.
by BoBaCk1
Tue Mar 25, 2014 7:43 pm
Forum: On the Street
Topic: KA-T vs 370Z Superchargerd
Replies: 4
Views: 6841

Re: KA-T vs 370Z Superchargerd

Nice run bro. Was this on your 20 psi setting? Your car was pulling good.
by BoBaCk1
Fri Mar 07, 2014 10:07 pm
Forum: Dyno Results
Topic: 6262 @30 psi
Replies: 42
Views: 19859

Re: 6262 @30 psi

Precision t3 6262 cea .82 ar. I was thinking about trying those custom age 625+ studs.
by BoBaCk1
Thu Feb 13, 2014 5:12 am
Forum: Dyno Results
Topic: 6262 @30 psi
Replies: 42
Views: 19859

Re: 6262 @30 psi

No I'm sure mine won't rust inside the head with oil on it lol.the only way that can happen is if it's left outside with bad humidity or moisture, or it gets wet. But I still haven't seen any cases of l19 doing that.
by BoBaCk1
Mon Feb 10, 2014 7:55 pm
Forum: Dyno Results
Topic: 6262 @30 psi
Replies: 42
Views: 19859

Re: 6262 @30 psi

Being able to do the timeserts with the motor still in the car would really save a lot of time and hassle. Thanks for posting the link. May I ask where you bought your head studs? I'm assuming you're using the 11mm L19 Evo head studs? I honestly don't remember which website I bought them from but t...
by BoBaCk1
Thu Feb 06, 2014 5:15 pm
Forum: Dyno Results
Topic: 6262 @30 psi
Replies: 42
Views: 19859

Re: 6262 @30 psi

http://www.mechanicstoolsandbits.com/head-bolt-kits-time-sert-11125-m11x125mm-universal-head-bolt-thread-repair-kit-p-213.html This is the website and the kit I ordered. And it has free next day shipping . It really did come in the very next day. Made the morning delivery was pretty pleased with thi...
by BoBaCk1
Mon Feb 03, 2014 3:53 pm
Forum: Drag Racing
Topic: Q45 Diff question help please
Replies: 25
Views: 17546

Re: Q45 Diff question help please

I can only confirm that the 90-96 hubs work on our cars. Haven't tried or heard of anyone using the 97-01. As for the 300zx axles I'm pretty sure they would work as long as they are the same lengths as the 240's own. But I know for sure the pre 95 j30 axles work. That's what I'm using on my car for ...