Search found 191 matches

by sr20drag
Fri Nov 01, 2013 2:11 pm
Forum: Drag Racing
Topic: what is the quickest pass on stock IRS rear?
Replies: 8
Views: 7686

Re: what is the quickest pass on stock IRS rear?

I have a around $11000 in my ENTIRE build. Every nut and bolt including shell and paint. I have a $550 used alum 5.3L, $500 used BW S475 turbo, $1000 used built powerglide with a 1.80 straight cut gear set, used drag tires for $50, used 216/221 .585 lift cam off LS1tech..... etc, etc.... I made all ...
by sr20drag
Fri Nov 01, 2013 2:07 pm
Forum: Drag Racing
Topic: what is the quickest pass on stock IRS rear?
Replies: 8
Views: 7686

Re: what is the quickest pass on stock IRS rear?

I think he means stock as in no ladder bar or 4 link. flatout what diff and axles are you running? we run similar times stock r200 with kaaz 2 way...stock axles...pushing them to the limits i would imagine. that why i was curious how far anyone has gone on stock stuff When I say stock I mean 100% s...
by sr20drag
Wed Oct 30, 2013 9:47 am
Forum: Drag Racing
Topic: what is the quickest pass on stock IRS rear?
Replies: 8
Views: 7686

Re: what is the quickest pass on stock IRS rear?

I'm #1 on drag times with this pass. The RB26 car on there that is 2nd went 8.98@157
by sr20drag
Wed Oct 30, 2013 9:35 am
Forum: Drag Racing
Topic: Semi finals @ fall nationals * broke another axle!*
Replies: 12
Views: 5380

Re: Semi finals @ fall nationals * broke another axle!*

z32 with j30 axle on the ds and z32 on the passenger and that's the one that broke. I already have a 12 bolt rear with 4.10 pro gears that'll go on next year. I seen a q45 broken axle so I rather not even push the limits. 28x10.5 tires should net me 1.2 60ft!!!! How are you breaking the same axles ...
by sr20drag
Tue Sep 17, 2013 7:47 am
Forum: Drag Racing
Topic: wicked LSx S14 launch at LSfest...
Replies: 13
Views: 10190

Re: wicked LSx S14 launch at LSfest...

any info on the motor mods? stock short block L33 alum 5.3L out of a 2006 Z71. ching chang head studs, felpro permatorque blue gaskets with copper spray, lunati .660 lift dual springs, lunati 216/221 .585 lift cam, manley hardened push rods, stock LS1 intake and fuel rail, built powerglide with 1.8...
by sr20drag
Tue Sep 17, 2013 5:46 am
Forum: Drag Racing
Topic: wicked LSx S14 launch at LSfest...
Replies: 13
Views: 10190

Re: wicked LSx S14 launch at LSfest...

any info on the motor mods? stock short block L33 alum 5.3L out of a 2006 Z71. ching chang head studs, felpro permatorque blue gaskets with copper spray, lunati .660 lift dual springs, lunati 216/221 .585 lift cam, manley hardened push rods, stock LS1 intake and fuel rail, built powerglide with 1.8...
by sr20drag
Fri Sep 13, 2013 12:38 pm
Forum: Drag Racing
Topic: wicked LSx S14 launch at LSfest...
Replies: 13
Views: 10190

Re: wicked LSx S14 launch at LSfest...

jholman05 wrote:Have you been to cincy street wars? Looks familiar but I thought you were on s14 se wheels with some tiny drag radials there.
Wasn't me. I roll raced in Louisville one night but spun bad over a bridge with expansion joints on blitz coilovers and 26x10.5
by sr20drag
Fri Sep 13, 2013 12:36 pm
Forum: Drag Racing
Topic: wicked LSx S14 launch at LSfest...
Replies: 13
Views: 10190

Re: wicked LSx S14 launch at LSfest...

I almost went to L's fest.great times,auto or manual car?what tires are those,stock camber and toe alignment in the rear,zero'd out or positive? Powerglide, 28x10.5 MT drags tubes and screws on 15x8 5.5BS, ebay RUCA and toe control with all oem 200K mile rear struts. toed in slightly and cambered o...
by sr20drag
Thu Sep 12, 2013 5:29 am
Forum: Drag Racing
Topic: wicked LSx S14 launch at LSfest...
Replies: 13
Views: 10190

wicked LSx S14 launch at LSfest...

200K mile stock struts all the way around. Megan springs on the front. ebay RUCA and toe control on the rear. That's it! Shocked em!!!

Image
Image
Image
by sr20drag
Tue Aug 06, 2013 1:22 pm
Forum: KA-T Picture Threads
Topic: not KA-T but LSx-T
Replies: 15
Views: 4562

Re:

adamky wrote:Sick. Where in Kentucky are you? I'd love to meet up and check out your cars some time. Do you ever go to Ohio Valley dragstrip?

I'll be in Louisville Saturday.
by sr20drag
Tue Aug 06, 2013 1:21 pm
Forum: KA-T Picture Threads
Topic: not KA-T but LSx-T
Replies: 15
Views: 4562

Re: not KA-T but LSx-T

http://www.youtube.com/watch?v=YHeOY4kZaKM&feature=c4-overview&list=UUAO93f0MpXwGYUVJ9VHVjSQ It is on 10psi right now and too hard to handle! It's going to the dyno Saturday for full tilt with a Magnafuel 4303 pump. Should allow me to max out my BW S475. I'll be in Louisville Saturday night...
by sr20drag
Tue May 21, 2013 4:37 am
Forum: KA-T Picture Threads
Topic: not KA-T but LSx-T
Replies: 15
Views: 4562

not KA-T but LSx-T

http://imageshack.us/a/img855/3880/img20130507193419508.jpg http://imageshack.us/a/img515/4277/img20130507193430337.jpg http://imageshack.us/a/img547/7208/img20130507193404519.jpg http://imageshack.us/a/img600/2387/img20130504172959220.jpg http://imageshack.us/a/img546/1180/img20130504174711445.jpg...
by sr20drag
Wed May 15, 2013 4:39 am
Forum: Dyno Results
Topic: 319.2 rwhp / ~330 tq @ 10psi, built KA w/hx35
Replies: 28
Views: 13211

bullseyepower T3 .70ar turbine housing will give you 300rpm's of spool and lose nothing up top. Well worth the $200 they go for on extremepsi. I made 411whp with one at 20psi on a sr20 on 93oct and a jwt rom tune years ago. It will like 16-18psi a LOT better. Jst starting to get into the effeciency ...
by sr20drag
Thu Apr 04, 2013 3:28 am
Forum: Drag Racing
Topic: Suspension rear help
Replies: 7
Views: 3018

Get some of those Z32 pineapple subframe bushings. They're polyurethane, so they're nice and stiff yet don't transmit the noise like the solid aluminum ones do. Also you don't have to cut the metal sleeve out of the bushings like you do with the aluminum, that is after you burn the stock rubbers ou...
by sr20drag
Tue Dec 11, 2012 2:16 pm
Forum: Drag Racing
Topic: Drag Wheel/Tire Critique
Replies: 51
Views: 38346

any s14 guys running Z32 wheels with slicks? if so can i get a pic... I run a 26x10.5x16 MT ET street on Z32 wheels on my old SR20 S13. They fit nice and cut 1.5x 60' consistantly. Here are some pics of my current setup. 5.3L alum chebby motor and a BWS475 on corn.... The fronts are 15x3.5 with z32...
by sr20drag
Tue Sep 25, 2012 9:53 am
Forum: Dyno Results
Topic: 883whp / 682wtq
Replies: 8
Views: 5506

Miami240 wrote:
ALTKAT96 wrote:Damn nice!!

Block oringed?
Nope
What is done to keep a head seal on the KA? Just BC stage 3 cams. cam gears, and what springs?

E85?
by sr20drag
Mon Sep 24, 2012 6:28 am
Forum: Dyno Results
Topic: 840hp / 679tq
Replies: 29
Views: 10095

dual bosch 044's? All I want to know is what does it take to keep a head gasket on this setup? o-ringed block, what head gasket, what head studs, etc. etc.....
by sr20drag
Wed Aug 29, 2012 3:50 am
Forum: Drag Racing
Topic: Drag Wheel/Tire Critique
Replies: 51
Views: 38346

oneoverwrx wrote:You will probably need coilovers just to be safe. My car sits up some with my street setup but looks slammed on my slicks.
Are you trying a true 28x10.5? I had planned on running stock springs with koni yellows in the rear.
by sr20drag
Sun Aug 26, 2012 4:42 pm
Forum: Drag Racing
Topic: Drag Wheel/Tire Critique
Replies: 51
Views: 38346

Weld Racing Draglites 15"x10" w/ 7.5" backspacing in back with 20mm spacer and ARP extended studs on 27x11.5 Hoosier Quicktime Pro...all it needs is a little fender pull on the rear and I'm set so I can flatten out the camber some more. Greg Weld Dragstar 17"x4.5" w/ 2.25&q...
by sr20drag
Tue Jul 31, 2012 3:29 am
Forum: Drag Racing
Topic: Rear differential options
Replies: 8
Views: 6333

by sr20drag
Mon Jul 30, 2012 5:19 am
Forum: Drag Racing
Topic: Rear differential options
Replies: 8
Views: 6333

Thanks for the info. I guess I am wanting to just use the q45 r&p in my housing. Does anyone put these together and sell them? Just get the q45 diff and tap the input for your driveshaft. You can keep your 4 lug hubs and all you will need is the z32 and q45 axels from oriely's. I paid $240 for ...
by sr20drag
Thu Jul 12, 2012 3:30 am
Forum: Dyno Results
Topic: jmac's He341aka hy35w @20 psi 404 whp and 382 torque.
Replies: 27
Views: 14877

The HY35/HE351's are GREAT turbo's for the KA-t. It spools like a T2 2871R and makes 400whp on pump gas and 450-500whp on E85. And you can buy them for $300 all day long. Can't really beat them on stock cams.
by sr20drag
Thu Jul 05, 2012 12:41 pm
Forum: Drag Racing
Topic: Raced last night and didnt do so well :(
Replies: 11
Views: 4198

11s is nice, what about 29 psi run, when you fix your stuff? 7.41@98mph and I did this witha 53mm t2 turbo on 24psi on E85 and nistune...... Stock pan to cover sr20. I think I could have trapped 98mph with a 3.91 gear. This was with a 4.36 diff http://img6.imageshack.us/img6/976/securedownload1j.jpg
by sr20drag
Thu Jun 28, 2012 4:11 am
Forum: KA-T Picture Threads
Topic: Daigle’s S14
Replies: 586
Views: 224870

Love the track package wheels on the S14.... That's what I'd have on mine if I wasn't such a drag racer. Weld draglites with 28x10.5 slicks on mine. :D
by sr20drag
Fri Jun 22, 2012 5:16 pm
Forum: KA-T Tech. Advanced
Topic: Blown HG again??
Replies: 28
Views: 5743

We've run a felpro to 19psi on 93 pump with 10mm head studs torqued to 80lbs and copper spray for 2 years on a KA-T. felpro requires 70ra not 50.
by sr20drag
Fri Jun 22, 2012 4:12 pm
Forum: Dyno Results
Topic: 503 whp @ 28psi
Replies: 18
Views: 6003

Every time I've broken an oil pickup I never completely lost oil pressure. Typically I would find my oil pressure would start to drop off around 4k...I never saw it drop below 35 PSI though. Both engines were fine when I opened them up. However I can't be sure what happened in Tariq's situation...a...
by sr20drag
Mon May 21, 2012 4:05 am
Forum: Dyno Results
Topic: dyno pull night in Las Vegas...threw my car on there
Replies: 21
Views: 7808

THe new PTE5858 will out spool the standard 35R and make very close to the same power....

http://www.extremepsi.com/store/product ... t=0&page=1
by sr20drag
Thu May 17, 2012 10:47 am
Forum: Dyno Results
Topic: dyno pull night in Las Vegas...threw my car on there
Replies: 21
Views: 7808

thanks for the input. not holding you to it but would you say u have 1 bar at or b4 4000? i realize im being a stickler but it seems like you have what im looking for turbo wise. looking for Drift setting: 375ish @ 15psi but really need that by 4000rpm 93oct Highway setting: 450ish @ 20psi 93 oct a...