Search found 18 matches
- Sat Aug 17, 2013 8:00 pm
- Forum: KA-T Tech. Basic
- Topic: maf located outside the bay?
- Replies: 2
- Views: 803
maf located outside the bay?
alright guys i know i need at least 12 inches of pipe with a 90 degree bend inbetween my maf and turbine. and the only i could've done that and still run a filter was to cut a hole and put some pipe inside it ;) So now i have my filter connected to my maf right behind my front bumper next to the hot...
- Fri Jul 19, 2013 6:15 pm
- Forum: KA-T Chat
- Topic: Valve cover paint, what do you guys use?
- Replies: 22
- Views: 4847
Re: Valve cover paint, what do you guys use?
Grant wrote:
vato zone haha, looks good, doesnt look like most of the crap jobs i have seen. is there a specific name brand you used for the clear??
- Wed Jul 17, 2013 2:21 pm
- Forum: KA-T Chat
- Topic: Valve cover paint, what do you guys use?
- Replies: 22
- Views: 4847
Re: Valve cover paint, what do you guys use?
i just use cheap engine enamel paint from vato zone
and throw in a sparkle clear coat spray i get from lowes
its not that obnoxiously sparkly unless the sun hits it. if its in the shade you will barely see any rainbow sparkles
- Wed Jul 17, 2013 2:11 pm
- Forum: Dyno Results
- Topic: ka-t 10psi hx35 stock block
- Replies: 13
- Views: 5987
Re: ka-t 10psi hx35 stock block
looking to get a similar setup pretty soon. hope i can pull those numbers on my ka. sweet kouki btw
- Wed May 11, 2011 12:03 pm
- Forum: Dyno Results
- Topic: s14 ka-t mk3 ct26
- Replies: 5
- Views: 2668
Re: s14 ka-t mk3 ct26
Edit: pics of the dirty grimey bay
- Fri May 06, 2011 10:57 am
- Forum: Dyno Results
- Topic: s14 ka-t mk3 ct26
- Replies: 5
- Views: 2668
yeah sup man! knew you'd be the fist response hahaah ;) i was thinking about asking enthalpy for a reflash but they have never tuned for this turbo before and toyota never released any specs /compressor map for this turbo so they probably would have no idea how much to lean the fuel by. i figure tha...
- Thu May 05, 2011 10:01 pm
- Forum: Dyno Results
- Topic: s14 ka-t mk3 ct26
- Replies: 5
- Views: 2668
s14 ka-t mk3 ct26
Finally got a chance to hit up the dyno a few weeks back and was disappointed. Tune is way too rich. 9.7-9.9 afr's throughout the run. The jagged curve is from my spark plug gap which is fixed now. http://img217.imageshack.us/img217/4258/imgnewr.jpg These runs were at 10 psi Definitely leaning it ou...
- Sun Apr 03, 2011 8:46 am
- Forum: KA-T Picture Threads
- Topic: Kstar's bottom bi*ch
- Replies: 70
- Views: 23778
- Tue Aug 24, 2010 7:37 pm
- Forum: KA-T Tech. Basic
- Topic: CT26 Turbo
- Replies: 16
- Views: 5669
pretty much theres a brace with two bolts on it at the center of the turbo. just unbolt the two and take the brace off. then just pry the turbo appart. of course this is an old turbo so it never comes off easy. you'll have to mallot it apart. i had to use a torch to heat it up red hot till it finall...
- Tue Aug 24, 2010 3:49 pm
- Forum: KA-T Tech. Basic
- Topic: CT26 Turbo
- Replies: 16
- Views: 5669
- Tue Aug 24, 2010 11:55 am
- Forum: KA-T Tech. Basic
- Topic: CT26 Turbo
- Replies: 16
- Views: 5669
im running: custom mani/38mm wg/nismo 550cc/ct26/enthalpy ecu/fmic/custom 2.5to3inch dp downpipe flange you can get right off ebay. http://cgi.ebay.com/ebaymotors/Toyota-CT26-CT-26-TURBO-Exhaust-REAR-Flange-SUPRA-7MGTE-_W0QQcmdZViewItemQQitemZ320456562984QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessori...
- Sat Aug 21, 2010 7:24 pm
- Forum: KA-T Tech. Basic
- Topic: CT26 Turbo
- Replies: 16
- Views: 5669
im running a ct26 on my ka-t as well. that adapter looks handy, wished they had that months ago. im pushing 12 psi currently and thats probably the limit on the turbo until you do a trim upgrade. idk though. its okay, but it seems that its not as big as i'd like. its decent power. i'd say its around...
- Thu Mar 25, 2010 7:26 pm
- Forum: KA-T Tech. Basic
- Topic: Top Mount or Bottom Mount turbo manifold
- Replies: 7
- Views: 1750
usually when ppl refer to a bottom mount setup its most likely a t25/t28 setup. although there are a few manifolds that have bigger turbos that are bottom mount(ams). i've personally havnt used an ebay bottom mount but everyone generally has good luck with them. ebay top mounts are another story and...
- Thu Mar 25, 2010 7:19 pm
- Forum: KA-T Tech. Basic
- Topic: rear o2 sensor bung
- Replies: 4
- Views: 1112
- Fri Nov 20, 2009 10:55 pm
- Forum: KA-T Chat
- Topic: what clutch are yall ka-ters runnin?
- Replies: 26
- Views: 4824
- Fri Sep 04, 2009 5:34 pm
- Forum: KA-T Chat
- Topic: From just changing the clutch to saying F it and boost! T25
- Replies: 12
- Views: 2104
- Fri Sep 04, 2009 5:26 pm
- Forum: Car Chat
- Topic: need advise on Air Impact gun
- Replies: 10
- Views: 2727