Search found 47 matches
- Tue Oct 04, 2016 5:08 pm
- Forum: KA-T Chat
- Topic: turbo oil drain leaking
- Replies: 4
- Views: 2388
Re: turbo oil drain leaking
No im using a 3/4 ID drain all the way to the pan and a -4 feed
- Mon Oct 03, 2016 6:00 pm
- Forum: KA-T Chat
- Topic: turbo oil drain leaking
- Replies: 4
- Views: 2388
Re: turbo oil drain leaking
Journal bearing turbo stock datsun 280zx right now i have my actuall pcv valve removed with a straight fitting running to the catch can and the valve cover vent running to the can as well and venting to atmosphere. Just using a cone style air filter with a short elbow. Using MSPNP AIT sensor and map...
- Sun Oct 02, 2016 1:35 pm
- Forum: KA-T Chat
- Topic: turbo oil drain leaking
- Replies: 4
- Views: 2388
turbo oil drain leaking
Anyone of you guys ever had the oil drain leaking at the turbo. I dunno what the hell is going on! ! have tried everything! its just a standard T3 turbo every gasket I've tried leaks. currentley i am using a copper gasket with high temp silicon and it still freaking leaks. I even went as far as taki...
- Mon Sep 19, 2016 7:07 pm
- Forum: ECU Tuning
- Topic: Megasquirt fuel & timing maps
- Replies: 4
- Views: 3339
Re: Megasquirt fuel & timing maps
well i got my fuel map sorted out the car idles high (about 1100 rpm) takes throttle pretty well stumbles if ya stab it though. and the starter kickback is nuts i ordered a diy wheel see if that helps.
- Sun Sep 11, 2016 5:52 pm
- Forum: ECU Tuning
- Topic: Megasquirt fuel & timing maps
- Replies: 4
- Views: 3339
Megasquirt fuel & timing maps
Ka24det 550cc injectors old 280zx T3 what do you guys think about these timing and fuel maps cars runs really rich and idles at like 1500 rpm i havent hooked my wideband up yet just fired it on these maps Ignition map http://img.photobucket.com/albums/v633/jesusno2/Mobile%20Uploads/2016-09/6B880CE8-...
- Mon Sep 05, 2016 6:44 pm
- Forum: DIYAutoTune
- Topic: S13 MSPNP2 aem wideband question
- Replies: 3
- Views: 8922
S13 MSPNP2 aem wideband question
Hey S13 PNP guys can i hook my AEM wideband into the old S13 O2 sensor wire? Or do i have to connect via options port?
- Mon Sep 05, 2016 6:41 pm
- Forum: ECU Tuning
- Topic: MSPNP2 s13 mac connection issues
- Replies: 1
- Views: 1468
Re: MSPNP2 s13 mac connection issues
I got it i thought it was all due to not using the DIYautotune usb adapter but turns out my insignia cheapo best buy adapter works fine. I downloaded the the driver for the wrong MAC IOS number. Helps to double check yourself sometimes lol
- Sun Sep 04, 2016 8:40 pm
- Forum: ECU Tuning
- Topic: MSPNP2 s13 mac connection issues
- Replies: 1
- Views: 1468
MSPNP2 s13 mac connection issues
Anyone here have exp trying to get a Mac book pro connected to MS? i cannot get mine to talk to my MS
- Sun Feb 07, 2016 10:35 pm
- Forum: KA-T Chat
- Topic: 280zx 300zx turbos
- Replies: 5
- Views: 2459
Re: 280zx 300zx turbos
Mine is the early zx turbo without the water jacket. I do know that this very turbo made very very close to 300whp in a 510 with a FJ20det
- Sun Jan 03, 2016 2:01 pm
- Forum: ECU Tuning
- Topic: Brand new engine and ecu questions
- Replies: 7
- Views: 3870
Re: Brand new engine and ecu questions
On stock ecu's swaps that i have done before i normally eliminate the egr stuff and all the ps ac idle up stuff cause its just not needed.
- Sun Jan 03, 2016 12:28 am
- Forum: KA-T Chat
- Topic: 280zx 300zx turbos
- Replies: 5
- Views: 2459
280zx 300zx turbos
Anyone familiar with such? I am rebuilding a 280zx t3 turbo to use on my ka-t datsun i am using a tial 38mm wastegate and 3inch down pipe will it be ok at 10 psi or will that be pushing it. Its hard to find much info on these factory turbos
- Sun Jan 03, 2016 12:17 am
- Forum: ECU Tuning
- Topic: Brand new engine and ecu questions
- Replies: 7
- Views: 3870
Re: Brand new engine and ecu questions
Thanks guys i ended going with the MSpnp i havent finished working on the car yet. But getting closer. Do any of you have exp with the pnp unit NOT in a 240? I hoping that the ECU will operate correctley. Not wired directley into a 240sx chassis harness, and instead using a aftermarket can/am relay ...
- Mon Jun 29, 2015 7:57 pm
- Forum: KA-T Chat
- Topic: Anyone using a AEM top feed fuel rail?
- Replies: 1
- Views: 1376
Re: Anyone using a AEM top feed fuel rail?
Nevermind looks like somebody machined it from 11mm to 14mm which really pisses me off cause i did not know it had been machined.
- Mon Jun 29, 2015 7:17 pm
- Forum: KA-T Chat
- Topic: Anyone using a AEM top feed fuel rail?
- Replies: 1
- Views: 1376
Anyone using a AEM top feed fuel rail?
What injectors fit in this thing? I have RX7 550s and the holes in the rail are huge compared to the injector. Granted im kinda a newbie so sorry if this is a dumb question.
- Sun May 31, 2015 11:07 am
- Forum: ECU Tuning
- Topic: Brand new engine and ecu questions
- Replies: 7
- Views: 3870
Re: Brand new engine and ecu questions
The biggest challenge will be figuring out trigger angle (if using the stock CAS disk) or tooth number one angle (if using the diyautotune disk) fast enough to not have to crank for a long time. You may want to consider unplugging the fuel pump and injectors and compare cranking timing advance to w...
- Sat May 30, 2015 11:48 pm
- Forum: ECU Tuning
- Topic: Brand new engine and ecu questions
- Replies: 7
- Views: 3870
Brand new engine and ecu questions
So i havent seen it covered anywhere so i thought i would ask the question here. I have in the works a fresh 16v ka with cp pistons and eagle rods cometic HG and arp studs. Fmic 450 or 460 RX7 top feed injectors (i think 460cc) stock 280zx or 300z ( same turbo) T3 turbo. Now my question is, I'm worr...
- Mon Feb 11, 2013 12:15 am
- Forum: ECU Tuning
- Topic: new to tuning aem fic hardbody sohc
- Replies: 9
- Views: 2541
Well I took the truck to a shop with a dyno with hopes on getting a learning curve on tuning. Unfortunately what I got was a month of waiting and nothing happened. So I got the truck back and looking for somebody to help get this thing in shape. I might take it up to PSI in Portland and see if they ...
- Tue Dec 11, 2012 6:26 pm
- Forum: ECU Tuning
- Topic: new to tuning aem fic hardbody sohc
- Replies: 9
- Views: 2541
This truck was tuned at one time by jgsturbo so I'm not sure the tune is wrong. It could be mechanical. But so far I haven't found anything wrong with it. The injectors look to be 450cc rx7 type. I'm not getting any trouble codes from the ecu and I've checked many times for vacumm leaks. I'm startin...
- Sun Dec 09, 2012 11:20 am
- Forum: ECU Tuning
- Topic: new to tuning aem fic hardbody sohc
- Replies: 9
- Views: 2541
- Thu Dec 06, 2012 10:20 pm
- Forum: ECU Tuning
- Topic: new to tuning aem fic hardbody sohc
- Replies: 9
- Views: 2541
new to tuning aem fic hardbody sohc
Yes i'm very green and kinda jumping in head First. Some of it i get, but i got a strange problem. Truck is rich. My idle warm is 10.0 full boost is about 10.9 ish to 11.5 ish, wide band jumps around a bit so hard to get a accurate reading. But at steady rpm even parked, it will peg the guage lean 1...
- Tue Jun 14, 2011 12:41 pm
- Forum: SOHC KA-T
- Topic: Tuning options for a boosted datsun 510
- Replies: 13
- Views: 2886
- Tue Jun 14, 2011 12:38 pm
- Forum: SOHC KA-T
- Topic: Intake manifold
- Replies: 15
- Views: 3705
- Tue Jun 14, 2011 11:39 am
- Forum: SOHC KA-T
- Topic: Tuning options for a boosted datsun 510
- Replies: 13
- Views: 2886
- Tue Jun 14, 2011 2:32 am
- Forum: SOHC KA-T
- Topic: Tuning options for a boosted datsun 510
- Replies: 13
- Views: 2886
- Tue Jun 14, 2011 2:30 am
- Forum: SOHC KA-T
- Topic: Intake manifold
- Replies: 15
- Views: 3705
- Mon Jun 13, 2011 1:41 pm
- Forum: SOHC KA-T
- Topic: Intake manifold
- Replies: 15
- Views: 3705
- Mon Jun 13, 2011 1:25 pm
- Forum: SOHC KA-T
- Topic: Intake manifold
- Replies: 15
- Views: 3705
- Mon Jun 13, 2011 1:07 pm
- Forum: SOHC KA-T
- Topic: Intake manifold
- Replies: 15
- Views: 3705
- Mon Jun 13, 2011 12:43 pm
- Forum: SOHC KA-T
- Topic: Tuning options for a boosted datsun 510
- Replies: 13
- Views: 2886
Tuning options for a boosted datsun 510
So i will admit im a complete noob with this tuning stuff and basically just want something simple that works. my car is ka24e 450cc injectors stock maf, t3 turbo, 7psi no more i want it to live. jim wolf i can get, and i also seen a guy on ebay doing eprom tuning i have read some bad things about h...
- Sun Dec 19, 2010 12:04 am
- Forum: SOHC KA-T
- Topic: MAFS! I hate em!
- Replies: 3
- Views: 1405