Search found 525 matches

by RosadoRacing
Wed Oct 07, 2020 7:13 pm
Forum: Drag Racing
Topic: Rosado Racing is back!! 9.90 @ 144mph
Replies: 14
Views: 35312

Re: Rosado Racing is back!! 9.90 @ 144mph

Def DID not grind the arp nuts. My machine shop got a grill bit the same size as the socket that is used for the nut and drilled to make room for the washers
by RosadoRacing
Sun Aug 19, 2018 12:45 am
Forum: Drag Racing
Topic: Rosado Racing is back!! 9.90 @ 144mph
Replies: 14
Views: 35312

Re: Rosado Racing is back!! 9.90 @ 144mph

No just went directly from 10mm to 12mm studs
by RosadoRacing
Thu Aug 16, 2018 8:55 pm
Forum: Drag Racing
Topic: Rosado Racing is back!! 9.90 @ 144mph
Replies: 14
Views: 35312

Re: Rosado Racing is back!! 9.90 @ 144mph

I lifted the head with the 10mm studs at 665whp im using rb26 12mm studs torqued to 105 ft lbs from what i remember the head will never lift now. Im shooting for 35psi this sunday and 1.3 60ft well see how it goes im hoping for 9.2-9.5s at 155mph.
by RosadoRacing
Sun Aug 05, 2018 11:35 pm
Forum: Drag Racing
Topic: Rosado Racing is back!! 9.90 @ 144mph
Replies: 14
Views: 35312

Re: Rosado Racing is back!! 9.90 @ 144mph

Def not stock trans i broke that years ago running 11.6 on 8 inch slicks im running a jdm 98 z32 spec trans. Kyb struts set to 3. And im popping the clutch on the launch.
by RosadoRacing
Tue Jul 31, 2018 5:22 pm
Forum: Drag Racing
Topic: Rosado Racing is back!! 9.90 @ 144mph
Replies: 14
Views: 35312

Re: Rosado Racing is back!! 9.90 @ 144mph

I hear u man. I figured id post just to keep the forum alive and keep supporting the ka-t community. I'm racing this Sunday so I'll repost What it does I'm aiming for low 9s. Car was all over the track and I have another 5psi in my map sensor left and another 300rpm to shift so a 9.0-9.2 pass is ver...
by RosadoRacing
Mon Jul 30, 2018 12:00 am
Forum: Drag Racing
Topic: Rosado Racing is back!! 9.90 @ 144mph
Replies: 14
Views: 35312

Rosado Racing is back!! 9.90 @ 144mph

Haven't been on the site for a min seems like the forum is dead!! But for the rest of the ka community that's Still around I ran 9.90 @ 144 on 30lbs of boost shifting at 7500rpm. I didn't didn't do a great burn out so the car had traction issues really bad it was all over the track. Goal is for low ...
by RosadoRacing
Fri Nov 04, 2016 10:04 pm
Forum: Drag Racing
Topic: Z32 trans
Replies: 9
Views: 7551

Re: Z32 trans

4th gear...
by RosadoRacing
Wed Nov 02, 2016 6:35 pm
Forum: Dyno Results
Topic: 761/596 Tq 33psi 6766
Replies: 11
Views: 9249

Re: 761/596 Tq 33psi 6766

Beautiful motor bro how far u plan on pushing it when u get the ignition limitation situated? U taken it to the drag strip? What rear end you have?
by RosadoRacing
Wed Nov 02, 2016 12:06 pm
Forum: Dyno Results
Topic: 761/596 Tq 33psi 6766
Replies: 11
Views: 9249

Re: 761/596 Tq 33psi 6766

Personally that motor will last as long as u want it to. Mine lasted 4 yrs n only took it apart to rebuild and upgrade few things such as wrist pins and 12mm studs. Constant oil changes and a good tune will make a ka run forever
by RosadoRacing
Tue Nov 01, 2016 11:46 pm
Forum: Dyno Results
Topic: 761/596 Tq 33psi 6766
Replies: 11
Views: 9249

Re: 761/596 Tq 33psi 6766

Nice numbers. what coils you running? Nice to see the eagle rods holding up. I plan on pushing them to 800whp 8000rpm. Let's c if my 350z coils and 1600cc injectors hold up lol. Any pics of the motor bro? U drag the car?
by RosadoRacing
Tue Nov 01, 2016 11:40 pm
Forum: Drag Racing
Topic: Z32 trans
Replies: 9
Views: 7551

Re: Z32 trans

I crossed the line around 7300rpm with the 4.08 gears. I now have 4.11 gears with a slightly taller tire a true 26" before i had a 25.8". Im hoping to hit 155mph at 8000rpm.
by RosadoRacing
Fri Oct 21, 2016 9:40 am
Forum: Drag Racing
Topic: Z32 trans
Replies: 9
Views: 7551

Re: Z32 trans

I broke the stock trans after a 11.6 pass at 14psi 440whp 350tq. it did last on The dyno when i made 660whp but the launch on slicks broke on the driveshaft side. I since been running the z32 no issues10.5 passes all day
by RosadoRacing
Mon Feb 29, 2016 1:24 pm
Forum: KA-T Picture Threads
Topic: My ****
Replies: 68
Views: 17815

Re: My ****

Matter of preference. Maybe his car would do better numbers with a g force 2000?
by RosadoRacing
Mon Feb 29, 2016 1:03 pm
Forum: KA-T Picture Threads
Topic: My ****
Replies: 68
Views: 17815

Re: My ****

Pj makes about 900whp with his sr and launches with no nos that 2jz prob makes around 1400whp and uses nos to launch. As far as this website goes pj set up is closer to everybody here than that 2jz set up just saying.
by RosadoRacing
Mon Feb 29, 2016 12:44 pm
Forum: KA-T Picture Threads
Topic: My ****
Replies: 68
Views: 17815

Re: My ****

That wheelie was ***** crazy!!! Def using nos for a launch like that. I thought u couldnt put a r230 in a s chassis? As far as the 60ft i stand corrected but its a 2jz wit prob 200 shot of nos lol
by RosadoRacing
Mon Feb 29, 2016 10:28 am
Forum: KA-T Picture Threads
Topic: My ****
Replies: 68
Views: 17815

Re: My ****

Lmfao that **** too funny! I was referring to irs s13 and s14. Fastest ive seen so far was 1.28 60ft with a z32 trans. But if u did 1.20 with a irs s13 or s14 than i stand corrected and u must be running a ton of nos to launch.
by RosadoRacing
Sun Feb 28, 2016 5:18 pm
Forum: KA-T Picture Threads
Topic: My ****
Replies: 68
Views: 17815

Re: My ****

Sorry i mixed up launch control and 2 step. I never used launch control. I don't think we need it when using slicks. Prob benefit More using it on the street.
by RosadoRacing
Sun Feb 28, 2016 5:14 pm
Forum: KA-T Picture Threads
Topic: My ****
Replies: 68
Views: 17815

Re: My ****

2 step is huge when getting consistant 60ft. And what i learned with consistency is using nlts helps alot and shifting smooth instead of banging the gears helps.
by RosadoRacing
Sun Feb 28, 2016 4:45 pm
Forum: KA-T Picture Threads
Topic: My ****
Replies: 68
Views: 17815

Re: My ****

As far as 7 and 6 sec Cars most of the time an auto is better for 90% of the drivers out there as far as consistency goes but, pro stocks are 5 spd and there prob the most cosistant cars in nhra. And as far as being faster 5spd prevail in most cases as they accelerate faster and rob less hp. Pj quic...
by RosadoRacing
Sun Feb 28, 2016 12:01 pm
Forum: KA-T Picture Threads
Topic: My ****
Replies: 68
Views: 17815

Re: My ****

Z32 trans nlts will beat a glide n c4 anyday!!! 1.3 60ft what auto can beat that?
by RosadoRacing
Fri Feb 26, 2016 10:08 pm
Forum: KA-T Picture Threads
Topic: My ****
Replies: 68
Views: 17815

Re: My ****

If your a good driver and have a shift light you can be just as consistant as an auto. I have won many bracket races and beat alot of auto cars. One event that i made to the finals n loss due to Breakin an axle. I dialed in 10.90 and ran 10.91 10.93 10.92 basically .003 of my time n beat 2 auto cars...
by RosadoRacing
Sat Dec 26, 2015 10:23 pm
Forum: Drag Racing
Topic: World's fastest 1st gen Altima 10.453@139.63
Replies: 12
Views: 12739

Re: World's fastest 1st gen Altima 10.453@139.63

Looks like your taking it up to about 8200? Great run bro hope to c u next yr good luck
by RosadoRacing
Wed Nov 11, 2015 11:08 pm
Forum: KA-T Tech. Advanced
Topic: which ARP part#
Replies: 34
Views: 11858

Re: which ARP part#

I ran the saturn studs and switched over to ka studs. Saturn studs head lift 665whp. Ka studs torqued to 70 no head lift 721whp. Def worth switching
by RosadoRacing
Sat Feb 28, 2015 1:11 am
Forum: KA-T Picture Threads
Topic: Supakat's Thread
Replies: 1796
Views: 473691

Re: Supakat's Thread

If you get nice with slipping the clutch you should get 1.8 easy. I launched mine without two step revved around 4500 slipped the clutch like a normal launch did 1.8 60ft 11.03 @ 134mph roughly 560whp that pass was before I used two step and ran 10.59
by RosadoRacing
Wed Feb 18, 2015 8:26 pm
Forum: KA-T Picture Threads
Topic: Rosado racing new build!!! 2/17/15
Replies: 13
Views: 5351

Re: Rosado racing new build!!! 2/17/15

Torquefreak technically I will have a new motor cuz I have to rebuild it due to spinning a bearing. Might upgrade the rods and if I do than I can run 35psi. I'm def going to use rb26 studs so a few upgrades will be in affect.
by RosadoRacing
Wed Feb 18, 2015 3:41 am
Forum: KA-T Picture Threads
Topic: Rosado racing new build!!! 2/17/15
Replies: 13
Views: 5351

Re: Rosado racing new build!!! 2/17/15

Torquefreak the motor already made 721whp 552tq 27psi with a s366. I'm changing over to a series 2 aem ems and running the same tune with a few MinOr changes k series coils and bigger fuel lines
by RosadoRacing
Wed Feb 18, 2015 2:38 am
Forum: KA-T Picture Threads
Topic: Rosado racing new build!!! 2/17/15
Replies: 13
Views: 5351

Re: Rosado racing new build!!! 2/17/15

Supakat your correct they are the same and is what everybody uses when doing the q45 Swap. Z32 tt axles are exTremely rare as is the r33 gtr rear that I have. I looked and called every where for a z32 tt axle to use with my 30 spline j30t lsd never found one. But I'm glad I have the Gtr rear it's a ...
by RosadoRacing
Wed Feb 18, 2015 1:50 am
Forum: KA-T Picture Threads
Topic: Rosado racing new build!!! 2/17/15
Replies: 13
Views: 5351

Re: Rosado racing new build!!! 2/17/15

I can buy a s14 subframe. I also would like to know if they're Better for launching and will work with s13 control arms because I have is is that I spent$450 on
by RosadoRacing
Tue Feb 17, 2015 1:30 am
Forum: KA-T Picture Threads
Topic: Rosado racing new build!!! 2/17/15
Replies: 13
Views: 5351

Re: Rosado racing new build!!! 2/17/15

32 spLine!!! No more broken axles ☺
by RosadoRacing
Tue Feb 17, 2015 1:23 am
Forum: KA-T Picture Threads
Topic: Rosado racing new build!!! 2/17/15
Replies: 13
Views: 5351

Re: Rosado racing new build!!! 2/17/15

R33 Gtr 6 bolt axles 4.11