Search found 42 matches

by 240SX-Pat
Sat Jan 15, 2011 8:25 pm
Forum: KA-T Chat
Topic: tuning jwt 72lb injector program with safc
Replies: 19
Views: 3769

What MAF are you running & what wideband too? Its probably not JWT tune unless its some custom tune written just for your car. JWT has been doing it for too long and I personally have worked on too many JWT ECU tuned cars to know its not the programmer. Its always been the car or the setup on t...
by 240SX-Pat
Mon Jan 10, 2011 12:45 am
Forum: KA-T Chat
Topic: needing help picking the right parts for ka-t build
Replies: 27
Views: 3883

What do you think of the Wesco pistons? or the CP pistons?
by 240SX-Pat
Sun Jan 09, 2011 12:49 am
Forum: KA-T Chat
Topic: needing help picking the right parts for ka-t build
Replies: 27
Views: 3883

dynogod1995 wrote:i was talking to slowboy they have vary good pricing i was going to get
je pistons
eagle hbeam rods
arp head and main studs
acl race berrings
crometic head gasket
and a full felpro gasket set
shipped for $1092



Ok, so...who do I talk to for this set up here?
by 240SX-Pat
Sat Jan 08, 2011 11:28 am
Forum: KA-T Tech. Basic
Topic: New to KA-T's need some advice/ Build Thread
Replies: 10
Views: 2024

After about 2 months I finally had time to go back to my moms house where the car is stored at ( I'm currently staying with my GF, but yes I live with my parents). So basically I had an issue with the car being completely dead. I was driving home from work one day and made a really tight turn and on...
by 240SX-Pat
Sat Jan 08, 2011 2:09 am
Forum: KA-T Chat
Topic: Import DPS KA24 SLEEVED Blocks Now Available!!
Replies: 39
Views: 16930

Jmcc wrote:um i smell a google search coming on!!!!

Just did, that **** is amazing.
by 240SX-Pat
Sat Jan 08, 2011 1:55 am
Forum: KA-T Chat
Topic: needing help picking the right parts for ka-t build
Replies: 27
Views: 3883

Well I thought these would be good for this power spec as some mentioned in other threads and cosmetic was for high HP.
by 240SX-Pat
Fri Jan 07, 2011 11:05 pm
Forum: KA-T Chat
Topic: needing help picking the right parts for ka-t build
Replies: 27
Views: 3883

I'm def going to build my KA now I've got a question are these the same Fel-pro gaskets that I hear so much about?


http://cgi.ebay.com/ebaymotors/Fel-Pro- ... ccessories
by 240SX-Pat
Fri Jan 07, 2011 11:03 pm
Forum: KA-T Chat
Topic: Import DPS KA24 SLEEVED Blocks Now Available!!
Replies: 39
Views: 16930

Please forget my stupidity but what is the different between this sleeved block and OEM
by 240SX-Pat
Thu Jan 06, 2011 1:02 am
Forum: KA-T Tech. Basic
Topic: New to KA-T's need some advice/ Build Thread
Replies: 10
Views: 2024

oh yea I tried that believe me , the thing about it is it worked great before then one day I just reved it up trying to hear the BOV and all of a sudden I saw my temp climbed and the stock radiator I don't think anything is wrong with it and the water pump seems to be okay because I can see the cool...
by 240SX-Pat
Wed Jan 05, 2011 1:07 am
Forum: KA-T Tech. Basic
Topic: New to KA-T's need some advice/ Build Thread
Replies: 10
Views: 2024

Interesting thread , I think I'm just going to ditch this dude and spend my 2500 on rebuilding my KA my budget is actually 3k , I just need some guidance I'm looking for 250-300 HP. My car is having an overheating issue at the moment I haven't figured out what it might be but it will over heat after...
by 240SX-Pat
Wed Jan 05, 2011 12:55 am
Forum: KA-T Chat
Topic: needing help picking the right parts for ka-t build
Replies: 27
Views: 3883

who is slow boy and yea I am interested in that setup and price as well I'm looking for 250-300 HP I don't really know what I am going to need for a rebuilt. Recently I've been talking to this local dude about buying his SR setup but for 2500 I am leaning toward building my KA but I'm just affraid o...
by 240SX-Pat
Thu Aug 26, 2010 8:06 pm
Forum: KA-T Tech. Basic
Topic: KA-T overheating !
Replies: 8
Views: 1759

I bleed the system by jacking up the front of the car , radiator cap off and took off the 10 mm bleeder screw while refilling the radiator with coolant until it began flowing threw the bleeder. I'm using a stock radiator it's kinda old not sure if i need to replace this and idk if I should replay th...
by 240SX-Pat
Thu Aug 26, 2010 9:26 am
Forum: KA-T Tech. Basic
Topic: KA-T overheating !
Replies: 8
Views: 1759

The temp is probally like 80 or somthing it's not that hot I just know something is up with this car
by 240SX-Pat
Thu Aug 26, 2010 9:25 am
Forum: KA-T Tech. Basic
Topic: KA-T overheating !
Replies: 8
Views: 1759

I think it is just a stock Rad it looks pretty old and These might be aftermarket fan there is a customized switch for it looks ghetto rigged its a dual fan. I'm not sure if its the fan at this point because it blows pretty good I'll take a phone and another question could low engine oil cause it to...
by 240SX-Pat
Thu Aug 26, 2010 8:07 am
Forum: KA-T Tech. Basic
Topic: KA-T overheating !
Replies: 8
Views: 1759

KA-T overheating !

Hey guys I got an over heating issue and I can't figure out what it might be. I got a KA-T and it didn't have this issue at first I could drive it around to places then one day while driving the temp just shot up and when I parked the overflown tank was boiling and coolant was spraying from that tan...
by 240SX-Pat
Tue Aug 10, 2010 5:30 pm
Forum: KA-T Tech. Basic
Topic: where is the Vacuum line that goes to BOV?! BOV not opening
Replies: 23
Views: 2960

I seen the screws attach to that EGR it was a pain to get to could I just block off the pipe?
by 240SX-Pat
Tue Aug 10, 2010 4:56 pm
Forum: KA-T Tech. Basic
Topic: where is the Vacuum line that goes to BOV?! BOV not opening
Replies: 23
Views: 2960

Ohh i c , I I think I'm starting see some life from this BOV I blocked 2 of the vacuum line that was loose...there is another one but im not sure if this is considered a vacuum line but when I took out the stock manifold I had to cut the EGR pipe that was attached to it because that screwed was jack...
by 240SX-Pat
Mon Aug 09, 2010 7:17 pm
Forum: KA-T Tech. Basic
Topic: where is the Vacuum line that goes to BOV?! BOV not opening
Replies: 23
Views: 2960

I'm thinking of getting the SSQV HKS does this require a high boost to make the BOV blow
by 240SX-Pat
Sun Aug 08, 2010 8:28 pm
Forum: KA-T Tech. Basic
Topic: where is the Vacuum line that goes to BOV?! BOV not opening
Replies: 23
Views: 2960

Hey, I Tee'd off the master cylinder hose and I can feel the vacuum just not opening the BOV ...IDK I'm thinking of trying another BOV just to make sure there is nothing wrong with this one but do you have any other suggestion??
by 240SX-Pat
Sat Aug 07, 2010 4:32 pm
Forum: KA-T Tech. Basic
Topic: where is the Vacuum line that goes to BOV?! BOV not opening
Replies: 23
Views: 2960

philspils wrote:on my setup if i dont boost above 7psi i cant hear my BOV at all, when i hit 10 its nice and loud though


Interesting I'll video record this and let you guys see maybe it can help
by 240SX-Pat
Sat Aug 07, 2010 4:30 pm
Forum: KA-T Tech. Basic
Topic: where is the Vacuum line that goes to BOV?! BOV not opening
Replies: 23
Views: 2960

I mean I can feel the vacuum. its just not open the BOV i also tried losing the bov screws

but nothing
by 240SX-Pat
Sat Aug 07, 2010 3:29 pm
Forum: KA-T Tech. Basic
Topic: where is the Vacuum line that goes to BOV?! BOV not opening
Replies: 23
Views: 2960

I mean I can feel the vacuum. its just not open the BOV i also tried lower the the bov

but nothing
by 240SX-Pat
Sat Aug 07, 2010 9:04 am
Forum: KA-T Tech. Basic
Topic: where is the Vacuum line that goes to BOV?! BOV not opening
Replies: 23
Views: 2960

damn really? let me go check it out again , I mean this thing had no sign of life man so I thought I had it wrong but you know exactly where I have it hooked up right?
by 240SX-Pat
Sat Aug 07, 2010 8:15 am
Forum: KA-T Tech. Basic
Topic: where is the Vacuum line that goes to BOV?! BOV not opening
Replies: 23
Views: 2960

•The brake booster tee should be used only for your blow off valve or boost gage, not the wastegate. •The wastegate side port should be connected to the compressor of the turbo or anywhere beween the turbo and the throttle body. Leave the top port of the wastegate open. •The boost controller should...
by 240SX-Pat
Sat Aug 07, 2010 12:26 am
Forum: KA-T Tech. Basic
Topic: where is the Vacuum line that goes to BOV?! BOV not opening
Replies: 23
Views: 2960

Hey can you just show me a photo so I can hook this up
by 240SX-Pat
Fri Aug 06, 2010 11:17 pm
Forum: KA-T Tech. Basic
Topic: where is the Vacuum line that goes to BOV?! BOV not opening
Replies: 23
Views: 2960

where is the Vacuum line that goes to BOV?! BOV not opening

Hey, can you guys show me a detailed pic of where the Vacuum line is located so that it can connect to the BOV. I think I Hooked it up wrong I have a T fitting on one of the skinnys hose on the intake but I don't think that is it the BOV is not blowing


I have a 93 KA


Thank you
by 240SX-Pat
Fri Aug 06, 2010 11:12 pm
Forum: KA-T Tech. Basic
Topic: Car is not starting up, no sound when key turned
Replies: 6
Views: 1326

Hey guys I found out what it was, it was the clutch sensor under the clutch peddle. I pressed the clutch down and noticed it was not touching the sensor at all so what I did was bent the metal to make sure the it will push the senor in and that was it everything is great now it starts up with no pro...
by 240SX-Pat
Thu Aug 05, 2010 3:39 pm
Forum: KA-T Tech. Basic
Topic: Car is not starting up, no sound when key turned
Replies: 6
Views: 1326

Car is not starting up, no sound when key turned

HEy, I got a KA-T I was trying to troubleshoot a leak that I was having issue with from the turbo feed. It started fine then I turned it off, now it does not want to turn back on it's like it does not want to ignite I always had this issue sometimes it takes a couple of tries before it decide to sta...
by 240SX-Pat
Fri Jul 16, 2010 9:19 pm
Forum: KA-T Tech. Basic
Topic: What size should an oil return line be? for a T3/T4
Replies: 2
Views: 704

thanks for the information , and yea can you pm me and are they 1/2 hose
by 240SX-Pat
Fri Jul 16, 2010 7:43 pm
Forum: KA-T Tech. Basic
Topic: What size should an oil return line be? for a T3/T4
Replies: 2
Views: 704

What size should an oil return line be? for a T3/T4

Hey guys I finally got the oil pan out god it was a pain but I got it now. My question is what size of the oil return line be? my tubo manuel book is recommending a 1/2" but I'm not sure where I can get one of these I do not see any of ebay of this size