Search found 30 matches

by slammedfc
Thu Dec 27, 2012 1:48 pm
Forum: Supercharged KA's
Topic: rear tb mount on a m90?
Replies: 1
Views: 5955

the m90 from the thunderbird is a better choice
by slammedfc
Wed May 09, 2012 12:27 pm
Forum: SOHC KA-T
Topic: sohc intake manifold.
Replies: 2
Views: 1249

awesome thanks man!
by slammedfc
Wed May 09, 2012 9:07 am
Forum: SOHC KA-T
Topic: sohc intake manifold.
Replies: 2
Views: 1249

sohc intake manifold.

can anyone measure the distance between the intake manifold and the strut tower for me? i would but i only have an engine here my car is 12 hrs away :(

thanks
by slammedfc
Fri May 04, 2012 2:35 pm
Forum: Supercharged KA's
Topic: KA24E-R Re-do
Replies: 13
Views: 6068

what we are really talking about here when the dust settles is reinventing hte wheel and poorly in my opinion . The supercharger option is nice and does get good results when done correctly but at teh end of the day here is what you have ... 1)less power than a comparable turbo setup even with subp...
by slammedfc
Fri Apr 27, 2012 8:59 am
Forum: Supercharged KA's
Topic: KA24E-R Re-do
Replies: 13
Views: 6068

its also a sohc ka, dime a dozen over here.
by slammedfc
Fri Apr 27, 2012 8:00 am
Forum: Supercharged KA's
Topic: KA24E-R Re-do
Replies: 13
Views: 6068

also, the m90 from the super coupe doesnt have a bypass valve, i am thinking of running a bov on the intake box to reduce belt slippage
by slammedfc
Fri Apr 27, 2012 7:57 am
Forum: Supercharged KA's
Topic: KA24E-R Re-do
Replies: 13
Views: 6068

if your going to fab a mani then why dont you fab a mani that you can run a real IC and then you can boost more than 10 pounds not have to run meth and be more efficient..... fabbing the mani will be easy, by no means can i weld aluminum, but i do have a co worker who is an amazing welder and will ...
by slammedfc
Fri Apr 27, 2012 7:55 am
Forum: Supercharged KA's
Topic: KA24E-R Re-do
Replies: 13
Views: 6068

The appeal of the supercharger is its quick boost and ease of packaging and intercooling it with a front mount may have detrimental affects making the thing less appealing over a turbo setup but theres only one way to find out I guess. Agreed. It's fun to be different and all, but I don't see the p...
by slammedfc
Thu Apr 26, 2012 9:36 am
Forum: Supercharged KA's
Topic: KA24E-R Re-do
Replies: 13
Views: 6068

KA24E-R Re-do

Hey guys, some of you probably remeber my remote mount m90 project. well i lost interest in that way. i was contemplationg what route to go for more power, ka-t/sr/rb/13b... but then i was thinking about doing this. Building a box to replace the stock upper intake manifold, mounting the m90 on the s...
by slammedfc
Fri Dec 30, 2011 3:35 pm
Forum: SOHC KA-T
Topic: KA24e-T questions
Replies: 10
Views: 2808

well i found out jordan gladman can make a bottom mount t2 flanged log mani, now here is where im stuck. have to decide between : 1) get the gladman t2 mani (250$) and find a t28 (up to $300) OR 2) buy the t3 flanged mani and rb20 turbo from a guy for $280 anyone run an rb20 turbo? how fast does it ...
by slammedfc
Fri Dec 30, 2011 9:14 am
Forum: SOHC KA-T
Topic: KA24e-T questions
Replies: 10
Views: 2808

its retarded 7 deg from stock, my buddy ran this on his ka-t until he went emanage.

ive heard good things about the sandwich plates. i will look into that
by slammedfc
Fri Dec 30, 2011 7:58 am
Forum: SOHC KA-T
Topic: KA24e-T questions
Replies: 10
Views: 2808

timing is retarded 7 deg
looks like gladman will make me a bottom mount t2 so i will probably go that route.
for oil lines i have to tap one from the block and one in the oil pan right?
by slammedfc
Thu Dec 29, 2011 8:41 am
Forum: SOHC KA-T
Topic: KA24e-T questions
Replies: 10
Views: 2808

true i forgot the down pipe. i have a full 3" kakimoto exhaust

i will be using the apexi neo (fancy safc lol) to tune for now, and upgrading to a full standalone later on or go for a nistune or something along those lines.

any idea where to get a sohc bottom mount mani t2 flanged?
by slammedfc
Wed Dec 28, 2011 9:32 am
Forum: Supercharged KA's
Topic: m90 remote mount kit
Replies: 5
Views: 5091

no one wants an sc kit?
by slammedfc
Tue Dec 27, 2011 10:32 am
Forum: SOHC KA-T
Topic: KA24e-T questions
Replies: 10
Views: 2808

KA24e-T questions

well im scrapping the ka-r project for now and going back to NA for the 700km drive out to alberta from bc. i want to go ka-t instead for different reasons. i have : 440cc inj aeromotive fpr aem uego wideband apexi neo gtr fuel pump fmic and piping bov rb25 maf what i need (from my understanding) t2...
by slammedfc
Wed Dec 07, 2011 9:06 am
Forum: Supercharged KA's
Topic: m90 remote mount kit
Replies: 5
Views: 5091

m90 remote mount kit

cc custom supercharger mount eaton m90 (at 10 psi) 50,000 kms cc custom tensioner pulley charger belt hot shot header fmic and piping/bov cc custom intake pipe THIS WORKS WITH POWER STEERING BUT NOT A/C [url]http://www.youtube.c...h?v=4ufq9FtvN9c[/url] $1000 obo http://a7.sphotos.ak.fbcdn.net/hphoto...
by slammedfc
Mon Dec 05, 2011 3:45 pm
Forum: Supercharged KA's
Topic: ka24e s/c project woes
Replies: 3
Views: 2725

im pretty sure my plug wires are *****. but it was running before that. sat for 6 months, fired right up pulled into shop put on hoist. then no start.
plugs were wet with fuel. fpr set at 45psi
by slammedfc
Mon Dec 05, 2011 10:27 am
Forum: Supercharged KA's
Topic: ka24e s/c project woes
Replies: 3
Views: 2725

ka24e s/c project woes

been trying to get this beast running. dont have much time to work on it tho as it lays about 11 hrs away... ka-e m90 apexi neo gtr pump 440s header 3" exhaust aeromotive fpr aem uego wideband. had it running but not very driveable. went to work on her and installed the fpr and wideband. tried ...
by slammedfc
Sun May 08, 2011 11:10 pm
Forum: Supercharged KA's
Topic: well..... i went for it
Replies: 10
Views: 4898

well she runs, getting a wideband next weekend to tune it and should be ready for drift fun!
heres a little vid. she wouldnt idle properly, but i figured out i had a vacuum leak
http://www.youtube.com/watch?v=4ufq9FtvN9c
by slammedfc
Fri Apr 15, 2011 7:59 am
Forum: Supercharged KA's
Topic: well..... i went for it
Replies: 10
Views: 4898

Well maf is wired in, waiting on a new fuel pump, and then she's ready to start.
Hot side of the ic pipe is done, everythings mounted. Just waiting for the pump and then she should be sliding again!
by slammedfc
Thu Apr 07, 2011 11:52 am
Forum: Supercharged KA's
Topic: well..... i went for it
Replies: 10
Views: 4898

http://youtu.be/6M4rnGe3C04
heres a teaser, not hooked into the motor yet, but got the tensioner done and made a lil vid
by slammedfc
Tue Apr 05, 2011 11:23 am
Forum: KA-T Tech. Basic
Topic: rb25 maf on sohc.......
Replies: 0
Views: 529

rb25 maf on sohc.......

my stock maf has 3 wires, rb25 maf has 4.....
what do i do for this? 90 sohc coupe
ive searched cant find ****
by slammedfc
Fri Apr 01, 2011 11:24 am
Forum: Supercharged KA's
Topic: base tuning for m90 on sohc
Replies: 0
Views: 1442

base tuning for m90 on sohc

what should i have the apexi neo set at for base tuning, ive heard i should retard the timing to 7 degrees. any input guys?
by slammedfc
Fri Apr 01, 2011 11:21 am
Forum: KA-T Tech. Basic
Topic: fpr questions
Replies: 9
Views: 1775

ok thanks guys, but i should be able to start it without an adj. fpr tho right aslong as i dont rev the **** outta it?
by slammedfc
Thu Mar 31, 2011 8:46 pm
Forum: KA-T Tech. Basic
Topic: fpr questions
Replies: 9
Views: 1775

fpr questions

hey guys running a ka24e with 460cc rx7 inj, walboro 255 and rb25 maf. using an apexi neo to adjust fuel...
basically wondering if i need an fpr, and if so what pressure should i be running?
by slammedfc
Wed Mar 30, 2011 8:39 pm
Forum: Supercharged KA's
Topic: well..... i went for it
Replies: 10
Views: 4898

gonna heat wrap the headers, hopefully take away some of the heat.
should have a video of her runnin once the maf gets here
by slammedfc
Wed Mar 30, 2011 8:19 pm
Forum: Supercharged KA's
Topic: well..... i went for it
Replies: 10
Views: 4898

well..... i went for it

well m90 + remote mount let the flaming begin..... slowly started getting parts m90, smic, 460cc inj, apexi neo http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/180016_10150412652540026_873030025_17236390_2780177_n.jpg scrapped the smic for a trust fmic, picked up a 282lph fuel pump http://a6.sphotos....
by slammedfc
Tue Feb 08, 2011 9:18 am
Forum: Supercharged KA's
Topic: ka24e m90 project
Replies: 1
Views: 2049

ka24e m90 project

Hey. Starting my project with a sohc coupe and an m 90 from an early supercoupe
Just wondering what impedance (sp?) Injectors I need, ie would series 4 fc rx7 injectors work? 440s
Going to use safc2 to tune
Run it thru a fmic with bov
255 fuel pump
What do I use for a pully to run th m90?
by slammedfc
Tue Sep 14, 2010 5:50 pm
Forum: Supercharged KA's
Topic: new to ka, want to use m90
Replies: 3
Views: 2468

I want to do the sc because I already have it, I was also thinking I could use the tmic I have for a small side mount so there is less piping, what would I use for timing control? And should I use a z32 maf? Thanks for the input
by slammedfc
Mon Sep 13, 2010 11:50 pm
Forum: Supercharged KA's
Topic: new to ka, want to use m90
Replies: 3
Views: 2468

new to ka, want to use m90

looking to push 7-10 psi,
can this be done on stock internals with 550 cc rx7 injectors, fmic and apexi neo?
ive heard i cant use power steering as i have to mount the s/c on the drivers side