Search found 31 matches

by DD my S14
Mon Mar 12, 2012 6:04 am
Forum: KA-T Tech. Basic
Topic: Temperatures rising
Replies: 9
Views: 2093

This car is wierding me out. So I drove from NC to South Florida this weekend and I got the same issue. I drove throughout the night, roughly around 9pm to about 530am. I drove from NC to about 100miles into Florida then let the car cool a bit and I got some rest. When I began driving again I notice...
by DD my S14
Fri Mar 09, 2012 12:44 pm
Forum: KA-T Tech. Basic
Topic: Temperatures rising
Replies: 9
Views: 2093

Swirl tank... this is the same as a breather tank correct.? also when i drive the car for about 2 hours going 55-65mph, this tampgauge is normal, it only happens once i pas 70mph, or put loan on the car.
by DD my S14
Thu Mar 08, 2012 9:16 pm
Forum: KA-T Tech. Basic
Topic: Temperatures rising
Replies: 9
Views: 2093

You think so? I had a funnel with water filled, the motor was running for about 15 min and the temperature didn't move past "C". Although I only had the car jacked up about 6inched from the tires, and i didn't touch the bleeder screw. It looked like all the bubbles were out. Any probabilit...
by DD my S14
Thu Mar 08, 2012 8:46 pm
Forum: KA-T Tech. Basic
Topic: Temperatures rising
Replies: 9
Views: 2093

Temperatures rising

Hello everyone. I turbo'ed my Ka24de about 6 months ago. When I first started driving the car it was around July 100 degree weather in NC. I don't have a temperature gauge so I'm not sure were the temperatures were looking like. I just rebuilt the bottom end so I breaking in the motor. I installed s...
by DD my S14
Wed Jan 25, 2012 5:11 pm
Forum: Dyno Results
Topic: KA-T DYNO WHAT DO YOU THINK?
Replies: 10
Views: 5614

Kfred wrote:
DD my S14 wrote:What do you mean by a Restrictive turbine?
Your turbine looks as if it is restricting. What size downpipe and exhaust are you running?
2.5 inches from turbo on to exhaust.
by DD my S14
Mon Jan 23, 2012 1:09 pm
Forum: Dyno Results
Topic: KA-T DYNO WHAT DO YOU THINK?
Replies: 10
Views: 5614

What do you mean by a Restrictive turbine? Also you think it may have to do that i still have the KA maf? http://www.buyimportperformance.com/GARRETT_TB0350_Turbocharger_466800_5005S_p/466800-5005s.htm Iv'e been looking for a flow chart but cannot find one. Here the turbo i have though. Any suggesti...
by DD my S14
Sat Jan 21, 2012 10:26 am
Forum: Dyno Results
Topic: KA-T DYNO WHAT DO YOU THINK?
Replies: 10
Views: 5614

I still have the ka MAF. Gas is not bad at all. a three hour drive going about 65mph w use up about a quarter tank of fuel.
by DD my S14
Fri Jan 20, 2012 4:26 pm
Forum: Dyno Results
Topic: KA-T DYNO WHAT DO YOU THINK?
Replies: 10
Views: 5614

KA-T DYNO WHAT DO YOU THINK?

Hello Gents.

12lbs / 93 octane / Garret TB03 a/r.48 / Greddy Emanage
I thought i would at least get 250hp.


Image
AFR stayed looking pretty good. What do you guys think?
by DD my S14
Fri Nov 04, 2011 9:13 am
Forum: KA-T Chat
Topic: Coolant Breather Tank?
Replies: 5
Views: 1183

Coolant Breather Tank?

Has any one heard of this? It is used to take out any air bubbles the engine may aquire. My Heater doesnt work, and my car tends to slightly overheat after driving it for more than 1hr. Anyone have their .02? LINK BELOW

http://www.gtfactory.jp/cms/page.php?11
by DD my S14
Tue Aug 02, 2011 5:29 pm
Forum: KA-T Picture Threads
Topic: S14 PICS only .... :-D must have pics in every post!!!
Replies: 519
Views: 206344

haha no man. Past the traffic circle, on G street. I spent about 2 months every weekend in that hobbyshop. The guys that work there are grand, and help out alot, Cheap too
by DD my S14
Sun Jul 24, 2011 5:55 pm
Forum: KA-T Picture Threads
Topic: Unbound Yuurei's Build Part3
Replies: 5
Views: 1994

Nice Vid! sounds real healthy!
by DD my S14
Wed Jun 01, 2011 8:00 am
Forum: KA-T Picture Threads
Topic: DDMYS14 Zenki build
Replies: 15
Views: 3648

Any other hard charging suggestions?
by DD my S14
Thu May 26, 2011 11:38 am
Forum: KA-T Picture Threads
Topic: DDMYS14 Zenki build
Replies: 15
Views: 3648

Yes I do. I had them mixed up on the initial crank, and noticed i wasnt getting any fuel pressure, so switched them up and pressure built up.
by DD my S14
Thu May 26, 2011 10:53 am
Forum: KA-T Picture Threads
Topic: DDMYS14 Zenki build
Replies: 15
Views: 3648

Well, I started to crank my motor with the Ignition wires on the distributor disconnected to get some oil running through the turbo feed line, But it Failed. So i connected the ingnition wires to fire it up and turn it off right away to see whether oil will then flow throught the oil feed line. It d...
by DD my S14
Mon May 23, 2011 6:49 am
Forum: KA-T Picture Threads
Topic: DDMYS14 Zenki build
Replies: 15
Views: 3648

UPDATE: I put some oil in the car to notice there was a leak with the bung that was welded on. The weld looked like popcorn but honestly didn't think it would have leaked. I slapped some JB weld on and called it a day. im going to see if i can start her up on Wednesday. I also finally got my IC pipi...
by DD my S14
Mon May 16, 2011 3:31 pm
Forum: KA-T Picture Threads
Topic: DDMYS14 Zenki build
Replies: 15
Views: 3648

Whats wrong with the filter? I am currently using a home depot 90* coupling for the hot pipe connecting to the turbo, im going to change it out sooner then later, question is, will it hold up while I break the motor/turbo in?
by DD my S14
Sun May 15, 2011 7:17 pm
Forum: KA-T Picture Threads
Topic: DDMYS14 Zenki build
Replies: 15
Views: 3648

DDMYS14 Zenki build

Hello Guys,Just wanted to share with you all and see whether y'all can give me some pointers on my set up. This is what i have so far. I have not started her up, i still need to wire the fan, plus double check to see whether everything is installed together properly. This is my first build and hones...
by DD my S14
Wed May 04, 2011 5:34 pm
Forum: KA-T Picture Threads
Topic: S14 PICS only .... :-D must have pics in every post!!!
Replies: 519
Views: 206344

http://i1197.photobucket.com/albums/aa434/alexisc1990/2010-11-08162422.jpg [/img] http://i1197.photobucket.com/albums/aa434/alexisc1990/2011-04-24160153.jpg Still in the process of boosting. Unfortunatly the Piping i have is wierd as crap. So i might have to modify to fit or just get new piping. We...
by DD my S14
Sun Mar 13, 2011 2:55 pm
Forum: Dyno Results
Topic: Dyno results, 50trim/.58ex, 12psi, 300hp
Replies: 39
Views: 13857

joshpntbl07 wrote:thanks. National speed has tuned both my prelude and 240sx. Im tuning with a series 1 aem ems. the ems and their 3.5bar map, iat sensor and wideband is the way to go.

What are their prices? i might go down some time next month.
by DD my S14
Sun Mar 13, 2011 8:47 am
Forum: Dyno Results
Topic: Dyno results, 50trim/.58ex, 12psi, 300hp
Replies: 39
Views: 13857

Wow, nice numbers man!! I'm actually thinking about getting my s14 Tuned down there. What kind of fuel management are you using? Nice numbers though man!
by DD my S14
Sat Mar 05, 2011 11:09 pm
Forum: KA-T Picture Threads
Topic: Supakat's Thread
Replies: 1796
Views: 474065

Hey SupaKat, I also am running a Greddy Emanage and these post have been extremely helpful with understanding more for my build. With my emanage i have the Greddy pressure sensor. where does the actual sensor hook up to? i have the harnesses just don't know where this sensor would be sourced to. An...
by DD my S14
Sat Mar 05, 2011 10:44 pm
Forum: KA-T Picture Threads
Topic: Supakat's Thread
Replies: 1796
Views: 474065

Hey SupaKat, I also am running a Greddy Emanage and these post have been extremely helpful with understanding more for my build. With my emanage i have the Greddy pressure sensor. where does the actual sensor hook up to? i have the harnesses just don't know where this sensor would be sourced to. Any...
by DD my S14
Sun Feb 20, 2011 8:42 am
Forum: ECU Tuning
Topic: Ultimate EMU install writeup + tuning
Replies: 43
Views: 51405

where would the Greddy Pressure Sensor,Greddy pressure sensor harness go? I have the Emanage Blue and cannot find where they connect to. I've been reading somewhere by the intake mani, but was not too sure. Thanks in advance.

Anyone??
by DD my S14
Mon Jan 10, 2011 7:18 am
Forum: KA-T Picture Threads
Topic: Supakat's Thread
Replies: 1796
Views: 474065

Nice!! thats the same set up i will be running shortly. I got the Standard Wiseco pistons and Eagle rods. Just trying to find a decent machine shop around my area that wont charge be a liver to clean the block and install the internals.
Hope to see your process!
by DD my S14
Fri Jan 07, 2011 3:01 pm
Forum: KA-T Tech. Basic
Topic: Starter took a dump... i think
Replies: 15
Views: 3067

Problem found.
Image[/img]
by DD my S14
Wed Jan 05, 2011 7:48 pm
Forum: KA-T Tech. Basic
Topic: Starter took a dump... i think
Replies: 15
Views: 3067

Thanks. this was my mistake. Any idea to why the starter would grind with the flywheel? It wasn't that cold when i tried to jump start it. I will try and see if i could jump start it. But thanks
by DD my S14
Tue Jan 04, 2011 9:31 pm
Forum: KA-T Tech. Basic
Topic: Starter took a dump... i think
Replies: 15
Views: 3067

i feel like a idiot. thanks! Ever since i started buyin my parts to make this bad boy into a KA-T, problem after problem has been occurring. Now that i have everything this shH happens. Better start saving some more money, cause my pockets arent that steep no more.
by DD my S14
Tue Jan 04, 2011 8:44 pm
Forum: KA-T Tech. Basic
Topic: Starter took a dump... i think
Replies: 15
Views: 3067

Starter took a dump... i think

Hello Everyone. I'm having a problem with my S14. I haven't turned the car on for under a month, and for some reason my brake light gets stuck causing it to drain out the battery. After Trying to jump start the car i got no luck, which left me to the conclusion that my battery is Completely dead. I ...
by DD my S14
Thu Dec 16, 2010 9:43 am
Forum: KA-T Tech. Basic
Topic: 255 Walbro fuel pump
Replies: 9
Views: 1650

Yes i already have the Emanage Blue. I've Searched for it but i dont find anyone that already has it, or they have the Emanage Ultimate. I downlaoded the PDF File off the Greddy Website. The emanage is already Tuned, i just need to find a way to install it. Anyone know about the Emanage Blue? Thanks...
by DD my S14
Wed Dec 15, 2010 7:45 pm
Forum: KA-T Tech. Basic
Topic: 255 Walbro fuel pump
Replies: 9
Views: 1650

thank you guys. I actually bought one today. Now next question.

Do any of y'all know any one that is running there setup with a Tuned Greddy Emanage Blue? :?:

As far as Tune, that's what I'm running with.
Thanks.