Search found 53 matches
- Thu Oct 10, 2013 3:50 pm
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Almost there. Need some help, please.
Checked the voltage to MAF, it's almost dead on and it also rises when I blew compressed air into the IC pipe. Checked ohms to TPS, that's good. Checked & set voltage to TPS, it's dead on. +/- 0.01 When laptop was hooked up, the only "error" in the DTC box was "55", which I g...
- Mon Oct 07, 2013 8:57 am
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Re: My awful build thread.
Both surfaces were super clean. The old gasket stuck to the upper intake when it came off, and with almost no resistance/scraping. I can't remember the name, but it was just a regular thin paper/plastic feeling stuff. I'd much rather have rubber. Bought some copper spray, new bolt and ordered a fel-...
- Sat Oct 05, 2013 5:43 pm
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Re: My awful build thread.
I'll try the wd-40 plus torch, if that doesn't work I'll smush some jb weld into a nut and thread it :-(
Are there rubber gaskets for the intake or just the paper/cork ones ? My friend suggested spray both sides with copper spray, sound good ?
Are there rubber gaskets for the intake or just the paper/cork ones ? My friend suggested spray both sides with copper spray, sound good ?
- Sat Oct 05, 2013 4:10 pm
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Re: My awful build thread.
Good news/bad news. My neighbor said I can use his laptop, but only for short amounts of time because he uses it for work. Hooked the laptop up, loaded map from ECU to nistune, changed MAF from some VQ 480hp MAF to the z32, injectors set to stock then 550. Messed around with latency/k constant and f...
- Tue Oct 01, 2013 12:35 pm
- Forum: KA-T Picture Threads
- Topic: finally building my ka :-)
- Replies: 103
- Views: 23335
Re: finally building my ka :-)
Isn't the 02 sensor extremely close to the turbo/heat ? I'm just going by what I've read, not flaming or anything ! Sweet build, keep the updates coming please
I love that copper/bronze tone on the mani/DP
I love that copper/bronze tone on the mani/DP
- Sat Sep 28, 2013 8:28 pm
- Forum: KA-T Picture Threads
- Topic: shift's build-that's wassup
- Replies: 829
- Views: 162261
Re: shift's build-that's wassup
I didn't mean to come off douchey or anything, sorry if I did, it wasn't my intention at all ! I get the vast majority of my info from http://www.Bobistheoilguy.com, He runs 0w-20 in his Lambo I believe. From what he says, the higher the weight, the more oil pressure you will get. At the cost of les...
- Sat Sep 28, 2013 6:40 pm
- Forum: KA-T Picture Threads
- Topic: shift's build-that's wassup
- Replies: 829
- Views: 162261
Re: shift's build-that's wassup
Have you tried synthetic 30 ? Have you always used 40 with this setup ? Notice a difference in oil pressure after you changed to rotella ? I would be curious if changing to a lighter weight would reduce the pressure enough to stop pushing it past the seals. The first number on the oil bottle is how ...
- Sat Sep 28, 2013 6:19 pm
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Re: My awful build thread.
Well, got everything together, had laptop with all the nistune guide PDF files open, just downloaded a couple good looking tunes from the ECU thread. Got the laptop out to the car, set it on the passenger seat, put 5 gallons of 93 in, came back and it had a bunch of lines across the screen. Powered ...
- Mon Sep 23, 2013 11:11 am
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Help identify plugs, please.
I have no clue where these 2 plugs go to. There's just enough slack in the wire for them to plug into each other, but obviously can't because they are like identical. Have this weird feeling I'm missing something big/important. One on the left goes to the wire loom that goes through the middle of th...
- Sat Sep 21, 2013 8:15 pm
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Re: My awful build thread.
Installed 15ft of 2 gauge wire for battery relocation. Bought a flex section for the exhaust, welded it to the downpipe, ran wideband sensor to it. Bought a distribution block from Best Buy, it was MISSING the friggin tabs that connect the main wire block to the other 2 ports. We cut flashing, folde...
- Sat Sep 21, 2013 2:23 am
- Forum: KA-T Tech. Basic
- Topic: Use rotella 15w40 as part of the break in process?
- Replies: 3
- Views: 1042
Re: Use rotella 15w40 as part of the break in process?
I have to ask what's the reasoning behind using 15w40 Vs 10w30 ?
In my humble opinion I would stick to 0w-30, 5w-30 or 10w-30 mineral oil for the 1000-1200 mile hard break-in.
0w-20, 5w-20, 0w-30 or 5w-30 synthetic afterwards.
In my humble opinion I would stick to 0w-30, 5w-30 or 10w-30 mineral oil for the 1000-1200 mile hard break-in.
0w-20, 5w-20, 0w-30 or 5w-30 synthetic afterwards.
- Thu Sep 19, 2013 9:26 am
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Re: My awful build thread.
I'd rather solder it all pro like, but honestly I don't feel comfortable/confident enough to be in a tiny area with a hot iron trying to solder thin 18 gauge wires. If they end up giving me trouble I'll have no choice though, haha.
- Wed Sep 18, 2013 9:46 pm
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Re: My awful build thread.
I still need to splice the wideband wires into the ECU harness. I bought a pack of those splice connectors, anyone have any input on these ?
- Wed Sep 18, 2013 9:38 pm
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Re: My awful build thread.
Worked on the car last 2 days, got a few things done. Words can't describe how much I HATED putting the oil pan back on, but it's on. Oil filter plate, oil feed line, oil return, turbo, wastegate, MAF (blow-through), intercooler piping, blowoff valve, manual boost controller and short shifter were i...
- Wed Sep 18, 2013 7:44 pm
- Forum: KA-T Picture Threads
- Topic: Finally putting it all together
- Replies: 6
- Views: 2183
Re: Finally putting it all together
Omg I love it. I love it so much !
That internet saying, "Not a single Fu** was given that day" seems appropriate for this.
That internet saying, "Not a single Fu** was given that day" seems appropriate for this.
- Sun Sep 08, 2013 4:25 pm
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Re: My awful build thread.
Oh I get ya. I'd rather not touch the DP cause I've got it as centered as I could looking between the steering bar and the transmission. I'll prolly end up wrapping it and try to tie it to something lol Finally got this crap all soldered, heat shrunk and electrical taped. The solder didn't want to s...
- Sun Sep 08, 2013 11:50 am
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Re: My awful build thread.
Thank you for the link. I don't quite know what you are saying about the downpipe though. What line ?
- Sat Sep 07, 2013 2:27 pm
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Re: My awful build thread.
Now Wiring the MAF and I think the person before me had it wired wrong. He had #2 (chassis ground/orange) and #4 (12v /white) wrapped and heat shrinked together. They weren't soldered or touching wires, but I can only ass-u-me it was wired like that. http://i1351.photobucket.com/albums/p786/jeff2673...
- Sat Sep 07, 2013 1:19 pm
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Re: My awful build thread.
I THINK I figured the wiring out. #4, 6 and 11 are for MAP sensors, so I don't use those. #2,5,8,9 and 12 are either for use of the EGT probe or added user inputs like temp sensors.
ZT-2 pin# - ECU
#1 - #36 Ignition switch
#3 - #2 RPM
#7 - Chassis ground
#10 - #20 Throttle Position Sensor Input
ZT-2 pin# - ECU
#1 - #36 Ignition switch
#3 - #2 RPM
#7 - Chassis ground
#10 - #20 Throttle Position Sensor Input
- Tue Sep 03, 2013 6:07 pm
- Forum: Electronics
- Topic: Zeitronix ZT-2 to 1992 KA24DE ECU
- Replies: 2
- Views: 5431
Re: Zeitronix ZT-2 to 1992 KA24DE ECU
Right click the picture, then click "open image in new tab". It will show the full, large picture.
- Tue Sep 03, 2013 6:02 pm
- Forum: Electronics
- Topic: Zeitronix ZT-2 to 1992 KA24DE ECU
- Replies: 2
- Views: 5431
- Tue Sep 03, 2013 6:00 pm
- Forum: Electronics
- Topic: Zeitronix ZT-2 to 1992 KA24DE ECU
- Replies: 2
- Views: 5431
Zeitronix ZT-2 to 1992 KA24DE ECU
I have searched for guides on how to wire the ZT-2 into the ECU harness, but haven't had any luck. So I thought it would be nice to get any/all questions answered in one thread so anyone who may need it in the future can have easier access. I, like many others, am somewhat uneducated when it comes t...
- Tue Sep 03, 2013 3:41 pm
- Forum: KA-T Picture Threads
- Topic: finally building my ka :-)
- Replies: 103
- Views: 23335
Re: finally building my ka :-)
That wash made a night and day difference
- Mon Sep 02, 2013 5:27 pm
- Forum: KA-T Picture Threads
- Topic: Smbonn's Track Star Street Car build
- Replies: 91
- Views: 22477
Re: Smbonn's Track Star Street Car build
Part of my soul died when I saw the picture of all the wires labeled. I'm over here having a nervous breakdown trying to figure out how to wire 12 wires into the ECU harness for my wideband, and you're over there doing.....that. I'm so jealous haha. Nice work, keep it up !
- Mon Sep 02, 2013 4:41 pm
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Re: My awful build thread.
I bought a used ECU with a Nistune daughter board already installed, do I need to re-register the ECU# or change any contact information with Nistune in order to install the software or run the ECU ? How much are used ECU's with nistune and all the cables to go with it going for these days ? Ballpar...
- Mon Sep 02, 2013 3:23 pm
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Re: My awful build thread.
Wiring from the ZT-2.
At this point I am pretty lost, any help would be greatly appreciated.
At this point I am pretty lost, any help would be greatly appreciated.
- Mon Sep 02, 2013 3:13 pm
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Re: My awful build thread.
Found this ECU wiring diagram, figured it might help others as well as myself for reference.
- Mon Sep 02, 2013 2:51 pm
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Re: My awful build thread.
Cut the 90* pipe. Beveled the edge of the pipe until it would fit inside the flange. Welded it up and I think the angle is good. Test fit with it connected, here's how she looks. That AC line is bugging the hell out of me though, as you can see it touches. Not sure what to do about that. http://i135...
- Mon Sep 02, 2013 2:39 pm
- Forum: KA-T Picture Threads
- Topic: Huffman's drift missile KAT (drift video inside)
- Replies: 75
- Views: 23006
Re: Huffman's drift missile KAT (drift Vid inside)
There is a drag/road race/drift video thread. You may get more feedback if you posted the videos in that section.
That wire hanging in the middle of the windshield would drive me nuts haha
That wire hanging in the middle of the windshield would drive me nuts haha
- Sat Aug 31, 2013 1:05 pm
- Forum: KA-T Picture Threads
- Topic: My awful build thread.
- Replies: 59
- Views: 12747
Re: My awful build thread.
Just a cheap mig welder with flux core wire. I'd love to buy a used tig with bells and whistles but I can't afford $1,000+ =(