www.ka-t.org

supakat wrote:What about sending out stock cams for regrinding?

here ya go sir
http://www.v8nissans.com/forums/showthr ... -Retainers

This ish is getting intense lol stupid wait time between episodes

That's alright man I'm running with my bov to atmosphere. Never had any problems with that. Good luck

Make sure your maf is atleast 12" away from the turbo inlet. Also make sure you have the pcv hooked up unless you have it blocked off that was giving me the same problem your having when I first went turbo.

I would say check the tps cause one of my wires was loose and it would die like that. Or possibly the iacv might be out. How is your maf setup? Blow through or pull through?

Subbed in. I had a problem like this but it was the plugs so guess I can't help. GL

Stupid small phone buttons and auto correct haha. 5 years and mt-90

You can also use Pennzoil synchromesh, I've been running it for 5 years with no problems and it's cheaper than mtg-90 ( yes I've changed it more than once in that 7 years)

Go to bersekers link just make sure you click part 2 under the video cause its only half of the episode lol

just got my rail in today. still waiting on the injectors to come in but it mounts up nice on the xcessive mani. great quality work for a great price, for the people worried about cosmetics any aluminum rail will scratch easily unless coated. thank you sir awesome doing business with you.

haha this is awesome. just made my day.

subbed in for this. the wait for speed density on tronic keeps getting bumped back, thats pretty much why I haven't spent money on it. a used ms3 with sensors for around the same price isn't that hard to find. lol election time is closing in for the battle of softwares

Zilvia is trash. This forum is the only major 240 related forum with competent users and a medialy enforced dialogue of thought and fact. Nobody here cares that it is dead. If your answer was posted in 2007, go get it. You don't need 100 teenagers spewing regurgitated misinformation and inflamatory...

schmauster920 wrote:Could be worth checking for vac/boost leaks and cam timing.. low vac is a sign too.. I think most KAs idle around mid 20s

so that explains it lol I was only at 18psi

you might try using a longer pipe between your maf and the turbo inlet, I had idle problems before extending it. just an idea

I like where this is going if you need advice you can probably ask turbonismo or efeezi(hope I spelt it right) they have some experience with the dsm setup

Lol wouldn't surprise me. The only things needed for the conversion are covered in the thread.

Definately a tune of some sort weather it be safc or a RT this is probably the most over looked portion of the step up to ka-t rather then a KA-BOOM. Especially if you want it to be reliable.

Summit has aem 5 bar sensors for $50

Interesting stuff subed

It did both but it left like thin crusty build up around the oil passages.

While my car was na I was running rp in it until I replaced the timing components. The rp left, I guess you would call it a burnt film around the oil pump and covers. So I could only imagine what it did where the engine was seeing higher temps. I didn't really think anything about this until my frie...

YESSSSS. this is awesome, well planned ideas that have been executed very well. Keep up the good work.

Yeah Idk how I missed that site it was listed in the other threads I was reading.
d'oh thank you sir

Hey guys, I've been looking into doing a retro fit for projector HID headlights on my zenki s14. I was trying to find some write ups on how to do it. Or just any ideas about how to/ what to use. So if anyone that has done this has any input that would be great. Especially if someone has done a tripl...

That's awesome man what software are you using for tuning?

specs and asking price of the cbr?

Has anyone ever used or know if this setup will work on a s14?
s13 kazama inner tie rods with kazama s14 outter tie rods.
thanks in advance.

well heres a link to how I ened up doing mine.
http://s1113.photobucket.com/albums/k50 ... 20adapter/

^^ good night that hammers an anvil haha. it looks like you put it in the right spot. Mine was a little to close and got a whompping from the guy in the previous post haha :bash: . good work for all the time and effort .