Search found 90 matches

by slidewayzagain
Fri Mar 22, 2013 1:05 pm
Forum: KA-T Tech. Basic
Topic: upgrading an hy35 for he351, your thoughts on gains? post 3
Replies: 5
Views: 1574

Any chance of an extra turbine wheel being for sale?
by slidewayzagain
Tue Mar 19, 2013 11:26 am
Forum: KA-T Chat
Topic: s13 fuse block under dash
Replies: 0
Views: 734

s13 fuse block under dash

I recently done a wire tuck and some relocation on my 90. what I am in need of is pictures of a stock under dash shot of the smj and the fuse box area showing some of the mounting. It has been over 2 yrs and I have changed a lot so I am lost as to remounting the smj and the other items located there...
by slidewayzagain
Sun Mar 10, 2013 3:33 pm
Forum: Introductions
Topic: Got room for a Rock Crawler?
Replies: 10
Views: 2271

cool

I like your thoughts and have no problem with rock crawling, work on quite a few myself. My questions are drivetrain related what are your thoughts on the dependability of the trans/tcase. Front end and rear end can be swapped easily enough with a welder and some time. just put toy axles under a tra...
by slidewayzagain
Fri Mar 01, 2013 11:05 am
Forum: KA-T Picture Threads
Topic: 500hpka240sx's build
Replies: 240
Views: 114002

I was also looking at your bracketry and location.I like it alot that thing is wicked there. I wander if using 2 18 gauge shields molded to the contour of the bracket and the blower with an air gap between to stop heat soak? I am curious as to the air inlet and outlet locations? I will look through ...
by slidewayzagain
Thu Feb 21, 2013 11:20 am
Forum: KA-T Tech. Basic
Topic: Anyone use the cast Iron mani?
Replies: 43
Views: 8481

I have a cast t3 t4 mani and when i checked alignment i put some little dots of rtv on the bare mani and then bolted it down and it was larger then my head. I think 1 5/8" and the head was 1.5" so Im not worrying about gasket alignment, evn thogh the gasket was offset like the one that was...
by slidewayzagain
Wed Dec 05, 2012 9:58 pm
Forum: SOHC KA-T
Topic: Ponda's Single Slammer Build Thread
Replies: 112
Views: 35324

like it
by slidewayzagain
Mon Nov 12, 2012 12:25 pm
Forum: KA-T Picture Threads
Topic: Beercans s13
Replies: 431
Views: 117724

possibly place a line wrench behid it and a little tapping
by slidewayzagain
Wed Nov 07, 2012 6:17 pm
Forum: Dyno Results
Topic: 396.1 whp /built KA w BW GM8
Replies: 18
Views: 6162

wha kind of info do you have on the gm4 6 and 8 turbos like the specs are a little hard to find.
nice power though. I c u intend on cam upgrades soon.
by slidewayzagain
Wed Nov 07, 2012 6:14 pm
Forum: DIYAutoTune
Topic: DIY Boost Control Solenoid
Replies: 7
Views: 1719

ms3 can do boost by gear and ms2 you have to do some work to make it happen but i believe its doable
by slidewayzagain
Sun Oct 28, 2012 4:23 pm
Forum: KA-T Picture Threads
Topic: Supakat's Thread
Replies: 1796
Views: 473255

sensor fix is easy. snip the end off that sucker feed a little wire through tj=he hole and solder it then install regular male female connectors ( i like the round ones) on the new end and the old and no more loosy goosy.
Granted you can try to squeeze the stocker with pliers for a tighter fit
by slidewayzagain
Sun Oct 28, 2012 4:17 pm
Forum: Welding/Fabrication
Topic: lsx adapter plate teaser
Replies: 37
Views: 11724

how affordable is regular r19 insulation buy a roll and wrap that box with multiple layers cover with plastic sheeting and a little mdf walla cleanable and quite on the outside minus your viewing hole and you are ready.
by slidewayzagain
Sun Oct 28, 2012 4:08 pm
Forum: KA-T Chat
Topic: lowering springs
Replies: 8
Views: 1824

fronts only like an hour or so. the best way is either rent a spring compressor or buy 1 cause the stockers are way longer then the travel of the struts. jack up car put on stands loosen 2 botom bolts and brake line bracket, then remove top 3 leaving center alone pull from car install compresor (pia...
by slidewayzagain
Sat Oct 27, 2012 12:28 pm
Forum: KA-T Chat
Topic: oil line hook up
Replies: 11
Views: 1822

on the stock oil filter housing I have read it is 1/8" bspt threads. done what you have done so I figure ill remve the housing and tap it either 1/8" npt or 1/4 npt and run from there. I also reccomend a flexible section somwhere, straight copper may crack over time due to vibration and su...
by slidewayzagain
Fri Oct 26, 2012 10:32 am
Forum: KA-T Chat
Topic: boost controller for controlling start of boost, why?
Replies: 6
Views: 1337

Ok on a hy 35 holset the bleed starts at 10 psi and your max is say 20 psi. now buy adjusting the bleed 10 psi up to say 12- 15 you get quicker spool. now you dont get your max unless you set your bleed to be at max. spike is probably from too small wastegate opening or to rapid release port it. als...
by slidewayzagain
Thu Oct 25, 2012 6:04 pm
Forum: Car Chat
Topic: Nashville area?
Replies: 4
Views: 1796

I am in the knoxville area but often round trip nastyville when going to the VA for my crazy checkups. If and when I ever finish my s13 would not mind hanging out, thats actually how I plan on engine and clutch breakin while adjusting tune is a 400+ mile round trip. To me third - fith gear at 55 mph...
by slidewayzagain
Thu Oct 25, 2012 5:55 pm
Forum: KA-T Chat
Topic: another spark plug??
Replies: 10
Views: 2443

I know not y the locals were unable to find by part numbers that were listed in many of the previous thread. I verified these to be correct online with multiple stores. I also noted that a few were slightly shorter for those with shaved heads this may help. My question would having the plug 1.45 mm ...
by slidewayzagain
Sat Oct 13, 2012 2:13 pm
Forum: KA-T Picture Threads
Topic: cams never ending build chicago
Replies: 290
Views: 54880

man build looks good, but that cage is scary the dash bar with those bends needs to be braced
by slidewayzagain
Fri Oct 12, 2012 8:26 pm
Forum: Welding/Fabrication
Topic: Welder Options
Replies: 18
Views: 5688

I got to agree with s13halfs15 advice and choice we have a lincon 130hd I think and it is just a little too small now for some of our projects. But you def want mig with gas for a starter welder. I have been the tack it and hold it guy for years and have just started actually doing some welding on m...
by slidewayzagain
Fri Oct 12, 2012 8:10 pm
Forum: KA-T Chat
Topic: start of a build
Replies: 25
Views: 3264

small tidbit for you after labeling the baggies with scotch tape( whatever color) use clear packing tape over top of the other tape. I didn't and the results from a year of storage was difficult to decipher . still figuring out the external bolts as I type budget allowing forged internals felpro reb...
by slidewayzagain
Fri Oct 12, 2012 7:43 pm
Forum: KA-T Chat
Topic: timing wheels/cogs??
Replies: 9
Views: 2087

so this is the final results if I done it even halfway corect... Lsa113 Your cam has an Overlap of -12.00 degrees Intake Duration of 214.00 degrees. The Exhaust Duration is 214.00 degrees. The Inlet Cam has an Installed Centerline of 98.00 degrees ATDC. The exhaust cam has an Installed Centerline of...
by slidewayzagain
Fri Oct 12, 2012 1:40 pm
Forum: KA-T Chat
Topic: timing wheels/cogs??
Replies: 9
Views: 2087

thats about the answer I got from jwt guy. But this is a new assembly still on stand. as long as I am at tdc cams lobe pointing out I can use either position on the idler 5oclock or 6 oclock . so I will install the bc cam straight up and the 248 4 teeth ccw mark these as 1 an 1 for the jwt then adju...
by slidewayzagain
Fri Oct 12, 2012 12:14 pm
Forum: KA-T Chat
Topic: timing wheels/cogs??
Replies: 9
Views: 2087

[quote="supakat"]The cams are correct. If you were to swap cams, it would hit the piston most likely. Remember with these, you swap the exhaust for intake. So the orange goes to intake and green exhaust. The intake cam actually has two dowel pins. Also to clarify, I matched these up agains...
by slidewayzagain
Fri Oct 12, 2012 12:11 pm
Forum: KA-T Chat
Topic: timing wheels/cogs??
Replies: 9
Views: 2087

ok after more studying I found out that the keyways should be the same. the idler sprocket is one tooth off every so many turns. in this thread this is where I rmove the upper chain and reinstall at http://i272.photobucket.com/albums/jj200/kfrede9/cams.jpg If the motor is at TDC in this picture, and...
by slidewayzagain
Fri Oct 12, 2012 4:50 am
Forum: KA-T Chat
Topic: timing wheels/cogs??
Replies: 9
Views: 2087

in the top pic you can see the keyway slot is misaligned on one of my stock gears. all three others match up correclty, I was trying to figure out if I had a bad lwt gear or a weird stock gear. Also whhen degreeing a 248 cam for intake what the normal alignment for jwt gears, stok is either 3 or 4 t...
by slidewayzagain
Thu Oct 11, 2012 6:49 pm
Forum: Hardbody KA-T's
Topic: and the project starts!
Replies: 12
Views: 4901

no intercooler or just mocking up? nice work
by slidewayzagain
Thu Oct 11, 2012 6:02 pm
Forum: KA-T Chat
Topic: timing wheels/cogs??
Replies: 9
Views: 2087

pics of off set

Image
Image
[/img]
the top is the offset being shown with stock gears
only 1 gear is offset this way is this normal or not? all 3 other gears line up perfect.
by slidewayzagain
Thu Oct 11, 2012 5:22 pm
Forum: KA-T Chat
Topic: timing wheels/cogs??
Replies: 9
Views: 2087

timing wheels/cogs??

93 s13 ka24de is there a difference between the intake cog and the exhaust cog in the clocking of the keyway slots? Mine have approximately .25" difference. Method of discovery is using the upper timing chain to align the cogs tooth for tooth and one cog is different in the keyway (the slot tha...
by slidewayzagain
Tue Oct 02, 2012 5:33 pm
Forum: KA-T Chat
Topic: Lesser of 2 evils? Fmu vs dsm injectors and safc
Replies: 9
Views: 1277

piggy

I have an emanage ultimate that I will take offers on. Still not enough post for the for sale section but it is available. I have seen horror stories with any and all fmu safc emanage blu and ultimate. I was going to run it till I came across an ms2 for a good price so I joined the crowd hy35 and ms...
by slidewayzagain
Mon Oct 01, 2012 8:01 am
Forum: KA-T Chat
Topic: KA with 300 trq from 3k rpm
Replies: 26
Views: 4934

Id be curious of the gtx3076 or join the holset crowd. hard to beat the bang for the bucks.
by slidewayzagain
Mon Oct 01, 2012 7:57 am
Forum: KA-T Picture Threads
Topic: 2FAS240's build thread
Replies: 184
Views: 74686

curious

What plug wires did you run for ls2 mounted like that and hows the fit?
Nice build