Search found 30 matches

by ka-t240sx
Tue May 24, 2016 11:51 pm
Forum: Dyno Results
Topic: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
Replies: 14
Views: 11829

Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35

https://youtu.be/_6Fu58C2pyU

Here's another pull, increased boost up to 16-17 psi and played with the timing a little bit
by ka-t240sx
Tue Aug 04, 2015 11:04 pm
Forum: Dyno Results
Topic: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
Replies: 14
Views: 11829

Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35

Street racing scene big in cow town? I don't know. Ive been out of the loop in the car scene for a good year and a half, too busy workin. I don't street race. Besides fooling round with a couple few buddies. I do know it's gone up since they got rid of out race track a few years ago and the closest...
by ka-t240sx
Fri Jul 17, 2015 11:34 pm
Forum: Dyno Results
Topic: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
Replies: 14
Views: 11829

Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35

^ Pm'd you

Here's a small 4th gear pull on a slight uphill.

https://youtu.be/aFxMT-fq8ZA
by ka-t240sx
Thu May 14, 2015 4:32 pm
Forum: Dyno Results
Topic: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
Replies: 14
Views: 11829

Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35

Kill3rwill wrote:Great numbers. Great to see another holset mafia member! Would you mind sharing your .MSQ?

Thanks haha. I love the holset.
msQ?
by ka-t240sx
Thu May 14, 2015 7:29 am
Forum: Dyno Results
Topic: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
Replies: 14
Views: 11829

Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35

I'm up in calgary alberta won't run that much boost unless I switch to race gas. I keep taking out bearings and rods when I make lots of boost on pump fuel. I'm more than happy with it. It hauls like a freight train. I was hoping for 375-400 but my tuner and I decided to stick with a fairly conserva...
by ka-t240sx
Thu May 14, 2015 12:16 am
Forum: Dyno Results
Topic: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
Replies: 14
Views: 11829

346 whp and 349 ft lb @ 15 psi. built ka with hx35

- 90 mm cp pistons. Pretty sure it's 8.5:1 cr - eagle rods - bc 272 cams, and springs (cams are not degreed, just turned back a couple few teeth on stock cam gears) -id1000 top feed injectors - radium fuel rail - aeromotive fpr and stealth 340 pump - clutchmasters fx400 6 puck Clutch - stock intake ...
by ka-t240sx
Sun Aug 18, 2013 10:37 pm
Forum: KA-T Chat
Topic: Straight Piped KA-T guys question
Replies: 22
Views: 4460

Re: Straight Piped KA-T guys question

http://youtu.be/7KujBhrQECs

Here is my ka-t straight piped for reference
All windows up, sun roof closed, recorded on an iphone4..
by ka-t240sx
Sat Jul 20, 2013 12:45 am
Forum: On the Street
Topic: 4 Kills, one day. KA-T FTW! :D
Replies: 6
Views: 7842

4 Kills, one day. KA-T FTW! :D

I got a few races down through out the day today haha. Wish i had videos but kinda not really safe to be racing and taking videos with out using a go pro or a passenger. First one i Was cruising down the highway on the way home from work when a s13 and a 2013 mustang gt roll up besides me. s13 had a...
by ka-t240sx
Sat Jul 13, 2013 12:09 am
Forum: DIYAutoTune
Topic: Question about tune file?
Replies: 2
Views: 1753

Re: Question about tune file?

Matt Cramer wrote:It's still in the ECU. Just connect with TunerStudio, make a new project, and go to File -> Save Tune As to grab the tune off the ECU.
im
Awesome! thank you!
Learn something new every day about this thing haha, didn't know you could export the tune stored in the ecu.
by ka-t240sx
Thu Jul 11, 2013 9:18 pm
Forum: DIYAutoTune
Topic: Question about tune file?
Replies: 2
Views: 1753

Question about tune file?

Hey guys. i'll try to explain this the best i can. The laptop we were using to do a tune on my buddys car finally **** the bed, the tune file was pretty much complete and saved on that laptop, but downloaded to the ecu already. is there any way to export the file from the ecu to another laptop or wo...
by ka-t240sx
Thu Jul 11, 2013 8:29 pm
Forum: Dyno Results
Topic: 319.2 rwhp / ~330 tq @ 10psi, built KA w/hx35
Replies: 28
Views: 13094

Re: 319.2 rwhp / ~330 tq @ 10psi, built KA w/hx35

neverlift wrote:0 mph ftw lol
LOl yeah, speed sensor is friggard.
toky042 wrote:damn pulls hard
Yeah, not bad for only ~10 psi. Startin to feel slow though. Probably just getting used to it that's all.
by ka-t240sx
Wed Jul 10, 2013 10:32 pm
Forum: Dyno Results
Topic: 319.2 rwhp / ~330 tq @ 10psi, built KA w/hx35
Replies: 28
Views: 13094

Re: 319.2 rwhp / ~330 tq @ 10psi, built KA w/hx35

Heres a vid, Rear tyres were 245/45/17 Falken Azenis rt-615k with ~25psi. She feels kinda slow :/ maybe im just used to 10psi lol. Don't plan on upping the boost until i get a better exhaust manifold/twin scroll.

http://youtu.be/7KujBhrQECs
by ka-t240sx
Wed Jul 10, 2013 10:11 pm
Forum: KA-T Picture Threads
Topic: What do you daily??
Replies: 38
Views: 7903

Re: What do you daily??

DD is a 98 Dodge Ram 1500 4x4. 272731km as of this evening 360 SB, CAI, 2 3/4" cat back, comp cam, 3" rear block, 3/4 ton front springs, 35x12.5x16 Mickey Thompson MTZ. She's a work horse, loves to haul stuff. and LOOOVES to drink gasoline lol. Looking to step up to a cummins someday soon....
by ka-t240sx
Fri May 17, 2013 7:00 pm
Forum: Dyno Results
Topic: 319.2 rwhp / ~330 tq @ 10psi, built KA w/hx35
Replies: 28
Views: 13094

bullseyepower T3 .70ar turbine housing will give you 300rpm's of spool and lose nothing up top. Well worth the $200 they go for on extremepsi. I made 411whp with one at 20psi on a sr20 on 93oct and a jwt rom tune years ago. It will like 16-18psi a LOT better. Jst starting to get into the effeciency...
by ka-t240sx
Thu Apr 25, 2013 6:22 pm
Forum: Dyno Results
Topic: 319.2 rwhp / ~330 tq @ 10psi, built KA w/hx35
Replies: 28
Views: 13094

Cool. I somehow missed this dyno sheet. Very similar to my old setup. CP, Eagle, HX35, 10-15psi, yadda yadda. At 10psi this is about what I was seeing in virtual dyno, so cool. Your cams help out though, stock S13s for me. And oh, seeing your dyno curve reminds me that I miss my HX / turbo in gener...
by ka-t240sx
Thu Apr 25, 2013 6:14 pm
Forum: Dyno Results
Topic: 319.2 rwhp / ~330 tq @ 10psi, built KA w/hx35
Replies: 28
Views: 13094

Mercury_Hg wrote:Are you running a BOV? I anticipate having a setup very similar to this one in the near future.

Arias 8.8:1 Pistons
Eagle Rods
Rebuilt head
JWT S1 Cams
HX35
JGS400 wastegate 7-8psi
3" dp w/ 2.5 dual exhaust
White bunny clutch setup
Nistune Type 3 board
740cc injectors
Yes Tial Q 50mm
by ka-t240sx
Wed Apr 17, 2013 9:45 pm
Forum: Dyno Results
Topic: ka-t 10psi hx35 stock block
Replies: 13
Views: 5987

That seems a little low, but still great numbers and nice looking car!
You'll have tons of fun with that thing, Just wait till you up the boost a little :p
by ka-t240sx
Fri Mar 29, 2013 9:55 pm
Forum: KA-T Tech. Basic
Topic: What Holset turbo should I go with for 300hp quick spool?
Replies: 52
Views: 19560

Im not dead set on the Holset, but I have heard they are built tough and last a long time. I have nothing against the T3/T4 setup, but I am on a bit of a budget, and I think I could get 2 hx30 for $500. They seem to run 200-300 rebuillt. For that much I could afford to buy a spare when I am a few m...
by ka-t240sx
Tue Mar 19, 2013 12:29 pm
Forum: KA-T Tech. Basic
Topic: white goo in oil?
Replies: 27
Views: 3300

Could be head gasket, or massive amount of moisture/water in your oil.
by ka-t240sx
Tue Jan 08, 2013 4:13 pm
Forum: KA-T Chat
Topic: ka differences
Replies: 22
Views: 4621

First thing id do is a compression test to see how healthy your motor is, unless you plan on rebuilding it. 250-300 is good on stock internals. reliability lies in the tune. Bad tune = motor go KABOOM For installing oil squirters on the ka24e block (someone correct me if i am wrong) but you'd have t...
by ka-t240sx
Mon Dec 24, 2012 12:47 am
Forum: Dyno Results
Topic: KA24E-T 400hp @ 12lbs
Replies: 7
Views: 5039

Thats pretty awesome!
Any info on the setup?
What turbo? Stock bottom end?
A graph would be awesome!
by ka-t240sx
Mon Dec 24, 2012 12:41 am
Forum: KA-T Tech. Basic
Topic: Forged piston slap and motor longetivity. Quiet pistons?
Replies: 61
Views: 9259

I have some 90mm CP's with 8:5.1 CR and i have piston slap until she warms up.
Machine shop could of over bored it a little :shrugshoulders:
She only see's track days and the occasional late night boot around town on the weekends.
maybe 800km a summer of street driving tops.
by ka-t240sx
Tue Dec 04, 2012 12:10 pm
Forum: KA-T Tech. Basic
Topic: Stock KA rod strength?
Replies: 10
Views: 2348

NEVER up the redline on stock rods. The stress on the rods is to the square of RPM, you're just looking for trouble. She still was making power up to stock redline and i was curious and bumped it up. It was just a spare block i had lying around while i was waiting for my other block to get back fro...
by ka-t240sx
Fri Nov 30, 2012 11:49 pm
Forum: KA-T Tech. Basic
Topic: Stock KA rod strength?
Replies: 10
Views: 2348

i ran stock rods with arp bolts on one of my few ka-t's that ive had.
twisted the rod at 346rwhp.
car never made it off of the dyno. :(
i was spinning it to 7500 rpm though
by ka-t240sx
Wed Nov 07, 2012 7:55 am
Forum: Dyno Results
Topic: 319.2 rwhp / ~330 tq @ 10psi, built KA w/hx35
Replies: 28
Views: 13094

Did you degree the cams? No, not really, just shimmed them properly, I still have the stock cam gears. Should probably invest in some JWT gears haha. I haven't had the time/money to get back on the dyno yet. I wouldn't mind going for 16-18 psi on pump for next year but im more than happy with where...
by ka-t240sx
Tue Nov 06, 2012 12:32 pm
Forum: Dyno Results
Topic: 319.2 rwhp / ~330 tq @ 10psi, built KA w/hx35
Replies: 28
Views: 13094

oops, my bad. 94 octane pump
by ka-t240sx
Tue Nov 06, 2012 12:28 pm
Forum: Dyno Results
Topic: 319.2 rwhp / ~330 tq @ 10psi, built KA w/hx35
Replies: 28
Views: 13094

319.2 rwhp / ~330 tq @ 10psi, built KA w/hx35

-CP pistons 8.5:1 iirc -Eagle rods -BC valvetrain minus valves -Stock intake manifold. (kinda wanna try the xcessive one, opinions?) -BC 272 cams -Holset hx35 w/12cm^2 exhaust housing -Turbosmart 38mm external wastegate w/8 psi spring -3"straight pipe to dual 4" tips -clutchmasters fx400 c...
by ka-t240sx
Mon Nov 05, 2012 9:37 pm
Forum: KA-T Picture Threads
Topic: *Post Your Engine Bay Pics*
Replies: 922
Views: 417687

supakat wrote:
picsbypenny wrote:holy hell, what size turbo is that?
Looks like an HX or HY35.
correct, its an hx35.
most definately won't be dissapointed.
she made 319 rwhp and ~330 tq @ 10 psi.
built ka
can post specs/dyno graph if anyone's interested
by ka-t240sx
Mon Nov 05, 2012 12:44 pm
Forum: KA-T Picture Threads
Topic: *Post Your Engine Bay Pics*
Replies: 922
Views: 417687

mine as of the other day.
snow melted and i got the urge for boost so she came outta hibernation :P
Image
by ka-t240sx
Wed Oct 31, 2012 11:35 am
Forum: KA-T Chat
Topic: Exhaust: whats everyone running?
Replies: 18
Views: 3923

3" straight pipe to 4" tips. custom 3" downpipe.
i have a video of my last auto cross day if anyone wants a sound clip. but im sure ya'll know what a straight piped boosted ka sounds like.

i ran a kakimoto 3.5" cat back on my old s13 which i loved. wasn't raspy, deep tone to it.