Search found 96 matches

by 240sxpt
Fri May 01, 2015 12:55 pm
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

hello my dear companions =D, been a long time since i've posted and have been pretty busy on the car, not many pictures though. well after i scrapped together all the pieces for the rebuild on the other engine i had here it was time to start to dig in. used the same crankshaft;rods;valve springs; ca...
by 240sxpt
Wed Jan 07, 2015 9:59 am
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

the piece on top is a part of the valve. this engine is for the junkyard, cilinder walls are all grooved up, so can't bore it over. head is as you see it. ready for junkyard also.......gonna swap the parts into the other engine i have here, hope it goes well this time
by 240sxpt
Wed Jan 07, 2015 6:49 am
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

well, last time wasn't a blown HG or broke head, was the intake mainfold that came loose a little bit, don't know how. after i fixed the little problem she ran great and went to a drift event. bad choice, as it still had a vaccum leak or something i guess. anyway, i ***** the engine up. here are som...
by 240sxpt
Sun Dec 07, 2014 2:40 pm
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

that's nice, will paint the engine bay metalic purple, excessive mainfold and rewire it all to get rid of uneeded cables as it will become a driftcar and not a daily car. can't drive it on the road, police here are too strict
by 240sxpt
Sun Dec 07, 2014 12:58 pm
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

can i use the 91cams in a 96 engine? or will it not fit? as i got the 96 engine laying here i'm going to swap the parts in to that engine and rebuilt this block later on. rotary parts are all the same for what i know, but the head is slightly different so will it fit?
by 240sxpt
Sun Dec 07, 2014 4:27 am
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

well, went to the track yesterday to do some drifting and got fcked real nice.....head cracked and puts air pressure in the water system.....so it's pretty fcked up all.... gonna take the whole engine out again.....rebuilt my other block and then in the future i'll get a used head for this engine......
by 240sxpt
Fri Nov 28, 2014 10:43 am
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

well, some people say it should be at 38psi at idle and 43 unhooked

i will rewire it and get a dw300, or the 400 just to be sure
by 240sxpt
Fri Nov 28, 2014 2:04 am
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

had to up the fuel pressure a bit, it's at 40 at idle and +/-45 under boost. walbro 255 can't handle the delivery. gonna swap out for a dw300 when i have the chance. car is running on 8psi only now. firs get a better wastegate and blowoffvalve, then i'll go to 15 and later 20. first play with her li...
by 240sxpt
Thu Nov 27, 2014 1:02 pm
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

well, was the maf that was bad. after alot of playing with tps idle screw and trottle body i got her to (what i think) perfection. 14.3/14.4 on idle after warmup, 10-10.3 on wot and 15-15.5 on cruise. pulls like hell, runs like a champ and this babe just makes my hearth beat faster. thanks alot to a...
by 240sxpt
Tue Nov 25, 2014 3:26 pm
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

thanks alot =D. checked it again and was the middle sprocket that was off by a tooth. love you guys for showing all the interest and helping me out. so i got the car to idle nicely, and more or less stable at 14/14.5 afr(at 1.2k rpm) but it will swing sometimes and go up to 2k rpm, this happens rand...
by 240sxpt
Sun Nov 23, 2014 2:04 pm
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

yup, that's true. i testes it when i first mounted the engine and all the valves were sealing well. told the machine shop to test it again just to be sure. so i tried to rotate the distribuitor one way and wouldn't even start (one tooth clockwise) and the other way it also doesn't start, but bogs al...
by 240sxpt
Sat Nov 22, 2014 10:53 pm
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

after. it was tested when i dimounted the head and send it there. so that is all good. also i don't think it's timing as i got everything lined up as the pics above, but i will try it
by 240sxpt
Sat Nov 22, 2014 9:54 pm
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

thanks alot, gonna try that to see if it makes a difference. also to a question you asked about the mainfold i expect it would be the exaust mainfold. it's pretty heavy, got thick walls, good welds and places the turbo at a real nice angle, more room for the MBC, so i'm pretty happy with it. it's fr...
by 240sxpt
Sat Nov 22, 2014 1:17 pm
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

well i'm fcked and don't know what's up with this thing..... ordered a new maf and it's here maybe thursday or wensday. let me know if you know what it might be here's a vid: https://www.youtube.com/watch?v=NKzbtfq-jNM&feature=youtu.behttps://www.youtube.com/watch?v=NKzbtfq-jNM&feature=youtu...
by 240sxpt
Thu Nov 20, 2014 5:45 am
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

checked timing just to be sure, but it's all good.

Image

Image
by 240sxpt
Thu Nov 20, 2014 1:23 am
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

i did the same, just clean air from turbo to the engine, no emission or anything. gonna try some more things see if she gets there.
if anybody got some ideas on this, i'll be pleased to see them.
by 240sxpt
Wed Nov 19, 2014 3:09 pm
Forum: KA-T Picture Threads
Topic: my 96 s14 build?
Replies: 16
Views: 5743

Re: my 96 s14 build?

lol, those eagles flew to hot xD. it's a shame they get treated like that.is the block still of use?
by 240sxpt
Wed Nov 19, 2014 1:39 pm
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

tried to start with the tps unplugged to see if idles, starts, then dies right after....still no progress.

tried another tps i had from the other engine, shows same values as the one it had mounted.....
by 240sxpt
Wed Nov 19, 2014 10:49 am
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

got her down to 14/15 afr at idle, but still have to contantly tap the gas pedal a little bit to keep her on. searched abit and found out about the tps. checked the resistance and that is probably the cause of the idle problem. closed trottle body should be at 10k ohm and wot 2k ohm. mine is showing...
by 240sxpt
Wed Nov 19, 2014 1:55 am
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

valves hitting must have been at the beginning. when we finnished her for the first time it was working the wrong way, pulling from exaust and pushing from intake, so i think it was there that the valves hit. that's all fixed up now, timing is all good. found out the idle screw was full of totaly cl...
by 240sxpt
Tue Nov 18, 2014 11:21 am
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

well got her fixed up and running again. sorry for the delay on update, been lazy as fck xD, just spooking around. how she sits now http://s26.postimg.org/95gjk0c2h/DSC_0045_1.jpg still got the idle problem..... always at 22.4... checked for vacuum leaks, fixed one, and then found nothing more. when...
by 240sxpt
Sat Nov 15, 2014 1:54 am
Forum: KA-T Picture Threads
Topic: not so legal street car build - canada
Replies: 89
Views: 24603

Re: ka-t street strip project-going NA until parts are colle

looks neat mate. don't know why but i love the front lights. more badass than any s13 or s14. anyway, get the bigger radiator before going turbo. i blew my hg because of that.

GL ;-)
by 240sxpt
Sun Nov 02, 2014 12:50 pm
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

ok, got the head of and saw a few things that i found rather strange. first one was that cyl#1,#2,#3 are all clean on the intake side and #4 is all black. any input on that? http://s26.postimg.org/f2rpz9zq1/DSC_0018_1.jpg second is that my intake valves are hitting the pistons, but she runs smooth. ...
by 240sxpt
Sun Nov 02, 2014 4:28 am
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

got everything hooked off the head and hope i'll take it off today and send it to the machine shop tommorow.

little box to keep all the bolts together
Image

Image
by 240sxpt
Sun Nov 02, 2014 4:23 am
Forum: KA-T Picture Threads
Topic: s13 coupin
Replies: 46
Views: 15306

Re: s13 coupin

just one thing.....isn't the drain plug under cyl#3 and #4 a pressurised one? i thought the drain was a cold water line and could be used to feed the turbo... my feed comes from the drain and then the hot water goes to the side nipple on the intake mainfold ( where the tubes to the trottlebody used ...
by 240sxpt
Sun Nov 02, 2014 4:13 am
Forum: KA-T Picture Threads
Topic: Tyrell240 89 coupe build
Replies: 125
Views: 36575

Re: Tyrell240 89 coupe build

dude, maybe i send you my car by usps and you paint it for me xD. ehehehhehe, wish i had a paint cabin like that
by 240sxpt
Fri Oct 31, 2014 10:09 pm
Forum: KA-T Picture Threads
Topic: s13 coupin
Replies: 46
Views: 15306

Re: s13 coupin

yeah i think so. but you can look on youtube, there is probably some crazy brazilian showing how to do it xD
by 240sxpt
Fri Oct 31, 2014 1:16 pm
Forum: KA-T Picture Threads
Topic: s13 coupin
Replies: 46
Views: 15306

Re: s13 coupin

take a bolt, make it the same diameter as the valve guides, then make the top the same diameter as the valves. then just hit them with a silicone hammer or something. that's what i would do. and if they break well.....fck it xD. i got the luxury of having no women or kids, so all the money i get i s...
by 240sxpt
Fri Oct 31, 2014 7:02 am
Forum: KA-T Picture Threads
Topic: portuguese 240 ka
Replies: 128
Views: 32524

Re: portuguese 240 ka

well, started to work on her at lunch pause, and i hope i have some time tonight to get the rest of

Image

this is as far as i got
Image
by 240sxpt
Fri Oct 31, 2014 4:43 am
Forum: KA-T Tech. Basic
Topic: Rough idle, smooth above 2500. Help
Replies: 1
Views: 1061

Re: Rough idle, smooth above 2500. Help

got any afr on that? i got the same problem, but mine won't even have a steady idle. and it's the same, after 2k she goes all the way with 12.5-13 afr. but at idle she just wants to bog out. if yo get any info on the problem post it please, maybe it can help me out.