www.ka-t.org

Update with a picture of the seat. I will try to get better pics with the brackets in place.

Ok Here are the pictures guys. I also have 2 Nismo seats with Nismo harness, with brackets - $350 The brackets are already attached to them ready to be put into a S13. These are also the brackets that make your seat about an inch taller. Now I don’t know how authentic the seats or the harness are bu...

Here is an Update list of whats left. And yes the tune was for stock maf and 550cc injectors. I also have 2 Nismo seats with Nismo harness, with brackets - $350 The brackets are already attached to them ready to be put into a S13. These are also the brackets that make your seat about an inch taller....

They are the RX7 550cc injectors. And what do you mean by stock emap tune? you want me to take off the 550cc tune and burn a stock one on there?

Well I dunno I went to Iraq 3 times and afgahn like once and some other places but I enjoyed that job, loosing my pride and joy which I put a lot of work into sucked really really bad.

Oh well time for a RB powered 280.

Yes you can pull the chip out with ease thats why I had a zif socket installed, and its a EEPROM the SST 27SF512, so you can erase it and re write it all you want.

Well guys due to the fact that people don't know how to drive these days, my Beloved S13 has been totaled on the high way on Sunday January 14. Basically it went like this. I drove my sister to work in the morning and on the way home while maintain the speed of the traffic which was about 80mph, and...

Let me tell you what though taking out the stock chip out of the ecu is a bi*ch, cause not only is the thing soldered into there, it's also epoxied on to there for preservation. Now to get a socket and chip just go here http://www.moates.net/ the sockets and chips are freakin dirt cheap. Good Luck.

NGK BKR7E's

it's a CA18ET, Had it, Loved it, Blew it, Sold it heh.

Well I have a SOHC and I run topfed injectors. Right now Im using Mazda RX7 550cc injectors and I went to pep boys and asked for the o ring seal kit for a sohc. And what the kit is, is you have to buy one kit per injectors. Top fed injectors have 3 parts to them. A top spacer, the O ring, and the bo...

You can simply go to a pep boys or autozone and pick up a kit. It come with the o-ring it self the bottom spacer and the top spacer.

Actually I had a cop pull me over one time, and I was like wtf did I do. So he walks to the front of my car and I drive with out my bumper just bumper support. Comes to the window and goes. " Don't these usally come with pop ups" I was like uhm yah and his like oh well those look neat, and...

I got those headlight for the fact that my pop ups kept breaking. At first I didn't really like the look but over time they grew on me. I'm doing the silvia conversion anyways. But those lights work really well and actually the fitment is really good too.

are you talking about the Fuel & Ignition Controller ? Cause if so that thing looks crazy sick.

Hey I use the Spec 3 clutch and their steel flywheel omg do I love that thing I hated my aluminum flywheel from findanza.

So I was thinking and looking at this. http://www.mapecu.co.nz/map2.html Now we all know that the biggest issue with piggy backs and timing issue is the fact that we don't know how much timing the stock ecu has pulled already before we start pulling it with the [iggy back. So what if we used timing ...

Hey Im just curious on your AFR's and what type of fuel pump are you using, and have you changed out your fuel lines yet? I got a MSD External pump and changed all my fuel lines to rubber ones, I'm running a SOHC with stock timing all the way on 10psi and 550cc injectors. I plan on getting some 850c...

Did you remove the butterflies? Cause when i removed mine i forgot to plus this little tiny hole and it leaked there. It was towards the top of the manifold right in the center where it bolts up to the head. Impossible to see when the manifold is on yes you can't see it I did the same thing but to ...

Ok do this. And if you plan on removing all your emission crap, then getting the top bolts is a snap too. Unbolt the tranny from the car then remove engine remove engine. Once the engine is out drop the tranny too. Then do all the engine work you need to. Now when you are ready to put the engine bac...

So when will I be able to purchase this gizmo? Have you tried it out yet?

Get your self some high temperature thread locker, it seems to have done the trick for me .

MSD only makes one pump and it is compatible. Im just saying I wouldn't recommend in tank fuel pumps for E85 period.

http://www.jegs.com/webapp/wcs/stores/s ... 2_22141_-1

Just to let you know your walbros are not E85 Compatible. You should get some MSD external pumps.

I use 550cc RX7 Injectors work great .

8 Psi and under 35 anything over 8 psi 28 .

I mounted mine to one of the screws on the lower intake manifold I will take a picture and post it In between runner 3 and 4. I know some people use the screw from the oil filter mount.

Suppose ably the SAFCII knock feature is just as worthless as monitoring your AFR with a Narrow band.

Yep Yep, The TXS knock Lite is awesome. I got a DE knock sensor and the knock light on my SOHC and I love the ***** thing .