Search found 30 matches

by TwoDoorDime
Sat Jun 20, 2020 11:49 am
Forum: KA-T Picture Threads
Topic: Datsun 510 ka24det
Replies: 16
Views: 12145

Re: Datsun 510 ka24det

Got a new Competition Stage 3 clutch installed and took the car out for a shake down run. Put about 100 miles on it, runs good but not much power at only 5.5 psi (wastegate spring). I cant wait to up the boost a bit and get the car moving. I posted a little video on my youtube page if anyone wants t...
by TwoDoorDime
Thu Apr 16, 2020 6:43 pm
Forum: KA-T Chat
Topic: KA24DET Build Preparation
Replies: 5
Views: 4467

Re: KA24DET Build Preparation

Id spend the money on standalone/dyno tune and fuel system rather than forged internals if the motor is healthy like R34sr said.
by TwoDoorDime
Thu Apr 16, 2020 3:38 pm
Forum: Dyno Results
Topic: BW S257SX-E 412WHP/383TQ @ 18.5#, 93Octane
Replies: 52
Views: 41152

Re: BW S257SX-E 412WHP/383TQ @ 18.5#, 93Octane

I am in the same boat! My foxbody sits right next to my LS swapped rx7 and it next to my single turbo rotary rx7 etc etc. I don't care about the brand just like rwd cars. I mostly like beaters but have had some nice cars as well.

At what power level did you hurt the stock bottom end?
by TwoDoorDime
Thu Apr 16, 2020 9:55 am
Forum: Dyno Results
Topic: BW S257SX-E 412WHP/383TQ @ 18.5#, 93Octane
Replies: 52
Views: 41152

Re: BW S257SX-E 412WHP/383TQ @ 18.5#, 93Octane

Oh i see an LS fan as well. I was a GM tech for years, have a few LS powered cars. Great s14!
by TwoDoorDime
Wed Apr 15, 2020 9:32 pm
Forum: KA-T Picture Threads
Topic: Datsun 510 ka24det
Replies: 16
Views: 12145

Re: Datsun 510 ka24det

Ah, glanced right over that one. Nope stock master, i don't feel any difference in pedal feel from before. Usually on 510's you can play around with the fronts a little without too much pedal feel change. Of course if people feel the need to change 280z fit and i believe early 200sx fit. Both have d...
by TwoDoorDime
Wed Apr 15, 2020 5:55 pm
Forum: KA-T Picture Threads
Topic: Datsun 510 ka24det
Replies: 16
Views: 12145

Re: Datsun 510 ka24det

My old ka24de daily driver. Swapped this car from stock motor/trans to ka24de in a weekend and then drove it daily for 2-3 years before selling it due to crappy life circumstances.
image0.jpeg
by TwoDoorDime
Wed Apr 15, 2020 5:51 pm
Forum: KA-T Picture Threads
Topic: Datsun 510 ka24det
Replies: 16
Views: 12145

Re: Datsun 510 ka24det

I did not touch the clutch master, its stock 510. My old red 510 was also dohc ka swapped and had some aftermarket 6 puck clutch, possibly ACT but its been years since i owned that car. Anyways, the pedal feel was pretty good even with that clutch so hopefully this one isn't too bad.
by TwoDoorDime
Wed Apr 15, 2020 5:48 pm
Forum: Dyno Results
Topic: BW S257SX-E 412WHP/383TQ @ 18.5#, 93Octane
Replies: 52
Views: 41152

Re: BW S257SX-E 412WHP/383TQ @ 18.5#, 93Octane

This car must be an absolute riot with that power! any pictures of the car itself?
by TwoDoorDime
Wed Apr 15, 2020 4:34 pm
Forum: KA-T Picture Threads
Topic: Datsun 510 ka24det
Replies: 16
Views: 12145

Re: Datsun 510 ka24det

Its a mazworx kit, still listed on their site for $139.

I cant take credit for the welds. I got it off offerup from a guy who started it but didn't finish, I will post up once I finish it for everyone to judge.
by TwoDoorDime
Wed Apr 15, 2020 4:02 pm
Forum: KA-T Picture Threads
Topic: Datsun 510 ka24det
Replies: 16
Views: 12145

Re: Datsun 510 ka24det

With the added power i decided to upgrade the brakes but refused to give up my 13" SSR's. Called techno toy tuning and got their 4 piston wilwood kit as well as their adjustable t/c rods (not pictured). Also, I am already over the ebay turbo manifold, for $70 i cant really complain but the port...
by TwoDoorDime
Wed Apr 15, 2020 3:48 pm
Forum: KA-T Picture Threads
Topic: Datsun 510 ka24det
Replies: 16
Views: 12145

Re: Datsun 510 ka24det

Well if yours is holding with that much power ill go ahead and order it now. 400ftlb is more than i plan on making! thanks!
by TwoDoorDime
Wed Apr 15, 2020 2:54 pm
Forum: KA-T Picture Threads
Topic: Datsun 510 ka24det
Replies: 16
Views: 12145

Re: Datsun 510 ka24det

Which one did you use?
by TwoDoorDime
Wed Apr 15, 2020 12:14 pm
Forum: KA-T Picture Threads
Topic: Datsun 510 ka24det
Replies: 16
Views: 12145

Re: Datsun 510 ka24det

Thank you for the feedback on the white bunny, that is probably what i will go with! 400ftlb is awesome! As for ISR i initially had their 750cc injectors and one was stuck open brand new out of the box. It filled crankcase with fuel and locked up the motor, i am a little hesitant to purchase any mor...
by TwoDoorDime
Tue Apr 14, 2020 6:04 pm
Forum: KA-T Picture Threads
Topic: Datsun 510 ka24det
Replies: 16
Views: 12145

Datsun 510 ka24det

I figured id post up some pictures about my beater 510. Ive owned this car for many years and just tinker with it on and off. Its on its 5th motor in my 12 year ownership. Only 1 of the motors popped the rest i just got bored and started tinkering again. Anyways basic run down is: 197x 2 door 510 (d...
by TwoDoorDime
Wed Nov 11, 2015 1:38 pm
Forum: KA-T Picture Threads
Topic: I call it the RX-247.
Replies: 10
Views: 4880

Re: I call it the RX-247.

I figured since this is ka-t I'd post a pic of my ka-t car haha. Ok so the goal of this car was simple, cheap, ugly, fast. I got the chassis for free in HORRIBLE shape. I had 8 other 510's at the time and a stock pile of spare parts. The car ended up getting all the worst parts. Since then I sold al...
by TwoDoorDime
Mon Nov 09, 2015 11:45 pm
Forum: KA-T Picture Threads
Topic: I call it the RX-247.
Replies: 10
Views: 4880

Re: I call it the RX-247.

Hey thanks for the encouragement man! I'm glad someone gets a kick out of the car too! I'll make sure and update as I go along. I've got some bills to catch up on and some parts to buy for my 302 fc project but after that I'm going to make turboing this turd a priority. I figure since the car is a T...
by TwoDoorDime
Thu Nov 05, 2015 3:34 pm
Forum: KA-T Picture Threads
Topic: I call it the RX-247.
Replies: 10
Views: 4880

Re: I call it the RX-247.

Thank you! I agree, it's the only kit I like too. All my others are stock body. I actually am doing a v8 swap on one of my other ones right now. Just a 302/t5 because I can't afford ls1/t56 but should still be fun. I really just like putting random motors in stuff. Fc's are so cheap there is no reas...
by TwoDoorDime
Thu Nov 05, 2015 9:03 am
Forum: KA-T Picture Threads
Topic: I call it the RX-247.
Replies: 10
Views: 4880

Re: I call it the RX-247.

Well that sucks. Thanks for letting me know! For me they opened up fine, I changed hosting sites and edited my post. Hopefully it's good now!
by TwoDoorDime
Wed Nov 04, 2015 6:08 pm
Forum: KA-T Picture Threads
Topic: I call it the RX-247.
Replies: 10
Views: 4880

Re: I call it the RX-247.

Ok, so far the car has all poly bushings, a rebuilt turbo II diff, Turbo II brakes, braided brake lines and couple other small things. I need to purchase some sort of stiffer, lower suspension. Not sure if I'll go with lowering springs and adjustable shocks, or full coilovers. I'm not the type of gu...
by TwoDoorDime
Wed Nov 04, 2015 6:06 pm
Forum: KA-T Picture Threads
Topic: I call it the RX-247.
Replies: 10
Views: 4880

I call it the RX-247.

Hello all. So my car is still n/a because I'm working on getting the kinks worked out before I turbo it. I am currently in the middle of swapping a ka24de into a 1987 Mazda rx-7. As you can imagine rx-7 guys aren't super stoked about the project. If I hear "it's a truck motor" one more tim...
by TwoDoorDime
Wed Jan 03, 2007 3:10 am
Forum: KA-T Tech. Basic
Topic: Finally Running! Megasqirt II Standalone fuel and spark cpu
Replies: 65
Views: 17577

toady im thinking about running ms2 also but mine with a ka-t powered datsun 510 send me a message on aim if u ever have the time id like to talk to you about ms
by TwoDoorDime
Sun Oct 08, 2006 4:20 pm
Forum: KA-T Tech. Basic
Topic: ?difference between rwd 240 ka,truck ka & fwd ka?
Replies: 10
Views: 3365

thank you nomad that is exactly what i needed to know.
by TwoDoorDime
Fri Oct 06, 2006 9:52 pm
Forum: KA-T Tech. Basic
Topic: ?difference between rwd 240 ka,truck ka & fwd ka?
Replies: 10
Views: 3365

i know about the 240 crossmember but im installing ka24 in a 510 and the crossmember is opposite. My question is can the rear sump oil pan be bolted onto a 240sx ka24
by TwoDoorDime
Fri Oct 06, 2006 10:30 am
Forum: KA-T Tech. Basic
Topic: ?difference between rwd 240 ka,truck ka & fwd ka?
Replies: 10
Views: 3365

truck ka's have rear sump??? Hmmmm.. Can i put the rear sump from truck on the 240sx ka24?
by TwoDoorDime
Tue Oct 03, 2006 5:17 pm
Forum: SOHC KA-T
Topic: 250h.p
Replies: 7
Views: 2300

jordan about how much did that set up cost you. 252 h.p and 280tq is PERFECT
by TwoDoorDime
Tue Oct 03, 2006 12:42 am
Forum: SOHC KA-T
Topic: 250h.p
Replies: 7
Views: 2300

250h.p

I was thinking about building a 250h.p ka24e-t and installing it into my 71 datsun 510. I had a few questions. Ive been reading about the ka24e for a while tryin to decide if its the motor for me or not. Ive seen a few lists of parts needed to build a ka to 250h.p but will someone post EVERY part i ...
by TwoDoorDime
Sat Mar 11, 2006 11:44 pm
Forum: KA-T Tech. Basic
Topic: Headgasket
Replies: 1
Views: 688

Headgasket

Where did u guys buy your headgasket (best price whise) got a link?
by TwoDoorDime
Tue Feb 28, 2006 1:07 am
Forum: KA-T Picture Threads
Topic: DATSUN 510 KA-T pics !!!!!! (NEW PICS !!!) 56K beware
Replies: 60
Views: 23806

Sweet i wanna do a ka-t in my 510 instant message me sumtime i need some info on a few things my aim screen name is twodoordime
by TwoDoorDime
Mon Feb 27, 2006 10:52 pm
Forum: Introductions
Topic: New to ka-t
Replies: 3
Views: 1614

Thanks for the welcome. Ill post some pics tomorrow
by TwoDoorDime
Mon Feb 27, 2006 8:20 pm
Forum: Introductions
Topic: New to ka-t
Replies: 3
Views: 1614

New to ka-t

Hey i dont own a 240 but i do have a ka24de that is going into my datsun 510 that i plan to turbo. My name is doug i live in san diego california. My car is a 1971 datsun 510 that is being restored with 4 wheel coil overs, disk brakes, ka24de-t, 8 point cage, sparco seats, ssr mesh wheels, to name t...