Search found 30 matches
- Sat Jun 20, 2020 11:49 am
- Forum: KA-T Picture Threads
- Topic: Datsun 510 ka24det
- Replies: 16
- Views: 12712
Re: Datsun 510 ka24det
Got a new Competition Stage 3 clutch installed and took the car out for a shake down run. Put about 100 miles on it, runs good but not much power at only 5.5 psi (wastegate spring). I cant wait to up the boost a bit and get the car moving. I posted a little video on my youtube page if anyone wants t...
- Thu Apr 16, 2020 6:43 pm
- Forum: KA-T Chat
- Topic: KA24DET Build Preparation
- Replies: 5
- Views: 4605
Re: KA24DET Build Preparation
Id spend the money on standalone/dyno tune and fuel system rather than forged internals if the motor is healthy like R34sr said.
- Thu Apr 16, 2020 3:38 pm
- Forum: Dyno Results
- Topic: BW S257SX-E 412WHP/383TQ @ 18.5#, 93Octane
- Replies: 52
- Views: 43387
Re: BW S257SX-E 412WHP/383TQ @ 18.5#, 93Octane
I am in the same boat! My foxbody sits right next to my LS swapped rx7 and it next to my single turbo rotary rx7 etc etc. I don't care about the brand just like rwd cars. I mostly like beaters but have had some nice cars as well.
At what power level did you hurt the stock bottom end?
At what power level did you hurt the stock bottom end?
- Thu Apr 16, 2020 9:55 am
- Forum: Dyno Results
- Topic: BW S257SX-E 412WHP/383TQ @ 18.5#, 93Octane
- Replies: 52
- Views: 43387
Re: BW S257SX-E 412WHP/383TQ @ 18.5#, 93Octane
Oh i see an LS fan as well. I was a GM tech for years, have a few LS powered cars. Great s14!
- Wed Apr 15, 2020 9:32 pm
- Forum: KA-T Picture Threads
- Topic: Datsun 510 ka24det
- Replies: 16
- Views: 12712
Re: Datsun 510 ka24det
Ah, glanced right over that one. Nope stock master, i don't feel any difference in pedal feel from before. Usually on 510's you can play around with the fronts a little without too much pedal feel change. Of course if people feel the need to change 280z fit and i believe early 200sx fit. Both have d...
- Wed Apr 15, 2020 5:55 pm
- Forum: KA-T Picture Threads
- Topic: Datsun 510 ka24det
- Replies: 16
- Views: 12712
Re: Datsun 510 ka24det
My old ka24de daily driver. Swapped this car from stock motor/trans to ka24de in a weekend and then drove it daily for 2-3 years before selling it due to crappy life circumstances.
- Wed Apr 15, 2020 5:51 pm
- Forum: KA-T Picture Threads
- Topic: Datsun 510 ka24det
- Replies: 16
- Views: 12712
Re: Datsun 510 ka24det
I did not touch the clutch master, its stock 510. My old red 510 was also dohc ka swapped and had some aftermarket 6 puck clutch, possibly ACT but its been years since i owned that car. Anyways, the pedal feel was pretty good even with that clutch so hopefully this one isn't too bad.
- Wed Apr 15, 2020 5:48 pm
- Forum: Dyno Results
- Topic: BW S257SX-E 412WHP/383TQ @ 18.5#, 93Octane
- Replies: 52
- Views: 43387
Re: BW S257SX-E 412WHP/383TQ @ 18.5#, 93Octane
This car must be an absolute riot with that power! any pictures of the car itself?
- Wed Apr 15, 2020 4:34 pm
- Forum: KA-T Picture Threads
- Topic: Datsun 510 ka24det
- Replies: 16
- Views: 12712
Re: Datsun 510 ka24det
Its a mazworx kit, still listed on their site for $139.
I cant take credit for the welds. I got it off offerup from a guy who started it but didn't finish, I will post up once I finish it for everyone to judge.
I cant take credit for the welds. I got it off offerup from a guy who started it but didn't finish, I will post up once I finish it for everyone to judge.
- Wed Apr 15, 2020 4:02 pm
- Forum: KA-T Picture Threads
- Topic: Datsun 510 ka24det
- Replies: 16
- Views: 12712
Re: Datsun 510 ka24det
With the added power i decided to upgrade the brakes but refused to give up my 13" SSR's. Called techno toy tuning and got their 4 piston wilwood kit as well as their adjustable t/c rods (not pictured). Also, I am already over the ebay turbo manifold, for $70 i cant really complain but the port...
- Wed Apr 15, 2020 3:48 pm
- Forum: KA-T Picture Threads
- Topic: Datsun 510 ka24det
- Replies: 16
- Views: 12712
Re: Datsun 510 ka24det
Well if yours is holding with that much power ill go ahead and order it now. 400ftlb is more than i plan on making! thanks!
- Wed Apr 15, 2020 2:54 pm
- Forum: KA-T Picture Threads
- Topic: Datsun 510 ka24det
- Replies: 16
- Views: 12712
Re: Datsun 510 ka24det
Which one did you use?
- Wed Apr 15, 2020 12:14 pm
- Forum: KA-T Picture Threads
- Topic: Datsun 510 ka24det
- Replies: 16
- Views: 12712
Re: Datsun 510 ka24det
Thank you for the feedback on the white bunny, that is probably what i will go with! 400ftlb is awesome! As for ISR i initially had their 750cc injectors and one was stuck open brand new out of the box. It filled crankcase with fuel and locked up the motor, i am a little hesitant to purchase any mor...
- Tue Apr 14, 2020 6:04 pm
- Forum: KA-T Picture Threads
- Topic: Datsun 510 ka24det
- Replies: 16
- Views: 12712
Datsun 510 ka24det
I figured id post up some pictures about my beater 510. Ive owned this car for many years and just tinker with it on and off. Its on its 5th motor in my 12 year ownership. Only 1 of the motors popped the rest i just got bored and started tinkering again. Anyways basic run down is: 197x 2 door 510 (d...
- Wed Nov 11, 2015 1:38 pm
- Forum: KA-T Picture Threads
- Topic: I call it the RX-247.
- Replies: 10
- Views: 4985
Re: I call it the RX-247.
I figured since this is ka-t I'd post a pic of my ka-t car haha. Ok so the goal of this car was simple, cheap, ugly, fast. I got the chassis for free in HORRIBLE shape. I had 8 other 510's at the time and a stock pile of spare parts. The car ended up getting all the worst parts. Since then I sold al...
- Mon Nov 09, 2015 11:45 pm
- Forum: KA-T Picture Threads
- Topic: I call it the RX-247.
- Replies: 10
- Views: 4985
Re: I call it the RX-247.
Hey thanks for the encouragement man! I'm glad someone gets a kick out of the car too! I'll make sure and update as I go along. I've got some bills to catch up on and some parts to buy for my 302 fc project but after that I'm going to make turboing this turd a priority. I figure since the car is a T...
- Thu Nov 05, 2015 3:34 pm
- Forum: KA-T Picture Threads
- Topic: I call it the RX-247.
- Replies: 10
- Views: 4985
Re: I call it the RX-247.
Thank you! I agree, it's the only kit I like too. All my others are stock body. I actually am doing a v8 swap on one of my other ones right now. Just a 302/t5 because I can't afford ls1/t56 but should still be fun. I really just like putting random motors in stuff. Fc's are so cheap there is no reas...
- Thu Nov 05, 2015 9:03 am
- Forum: KA-T Picture Threads
- Topic: I call it the RX-247.
- Replies: 10
- Views: 4985
Re: I call it the RX-247.
Well that sucks. Thanks for letting me know! For me they opened up fine, I changed hosting sites and edited my post. Hopefully it's good now!
- Wed Nov 04, 2015 6:08 pm
- Forum: KA-T Picture Threads
- Topic: I call it the RX-247.
- Replies: 10
- Views: 4985
Re: I call it the RX-247.
Ok, so far the car has all poly bushings, a rebuilt turbo II diff, Turbo II brakes, braided brake lines and couple other small things. I need to purchase some sort of stiffer, lower suspension. Not sure if I'll go with lowering springs and adjustable shocks, or full coilovers. I'm not the type of gu...
- Wed Nov 04, 2015 6:06 pm
- Forum: KA-T Picture Threads
- Topic: I call it the RX-247.
- Replies: 10
- Views: 4985
I call it the RX-247.
Hello all. So my car is still n/a because I'm working on getting the kinks worked out before I turbo it. I am currently in the middle of swapping a ka24de into a 1987 Mazda rx-7. As you can imagine rx-7 guys aren't super stoked about the project. If I hear "it's a truck motor" one more tim...
- Wed Jan 03, 2007 3:10 am
- Forum: KA-T Tech. Basic
- Topic: Finally Running! Megasqirt II Standalone fuel and spark cpu
- Replies: 65
- Views: 17639
- Sun Oct 08, 2006 4:20 pm
- Forum: KA-T Tech. Basic
- Topic: ?difference between rwd 240 ka,truck ka & fwd ka?
- Replies: 10
- Views: 3388
- Fri Oct 06, 2006 9:52 pm
- Forum: KA-T Tech. Basic
- Topic: ?difference between rwd 240 ka,truck ka & fwd ka?
- Replies: 10
- Views: 3388
- Fri Oct 06, 2006 10:30 am
- Forum: KA-T Tech. Basic
- Topic: ?difference between rwd 240 ka,truck ka & fwd ka?
- Replies: 10
- Views: 3388
250h.p
I was thinking about building a 250h.p ka24e-t and installing it into my 71 datsun 510. I had a few questions. Ive been reading about the ka24e for a while tryin to decide if its the motor for me or not. Ive seen a few lists of parts needed to build a ka to 250h.p but will someone post EVERY part i ...
- Sat Mar 11, 2006 11:44 pm
- Forum: KA-T Tech. Basic
- Topic: Headgasket
- Replies: 1
- Views: 692
Headgasket
Where did u guys buy your headgasket (best price whise) got a link?
- Tue Feb 28, 2006 1:07 am
- Forum: KA-T Picture Threads
- Topic: DATSUN 510 KA-T pics !!!!!! (NEW PICS !!!) 56K beware
- Replies: 60
- Views: 23838
- Mon Feb 27, 2006 10:52 pm
- Forum: Introductions
- Topic: New to ka-t
- Replies: 3
- Views: 1640
- Mon Feb 27, 2006 8:20 pm
- Forum: Introductions
- Topic: New to ka-t
- Replies: 3
- Views: 1640
New to ka-t
Hey i dont own a 240 but i do have a ka24de that is going into my datsun 510 that i plan to turbo. My name is doug i live in san diego california. My car is a 1971 datsun 510 that is being restored with 4 wheel coil overs, disk brakes, ka24de-t, 8 point cage, sparco seats, ssr mesh wheels, to name t...