www.ka-t.org

Tech12

He's right. You're engine... it's canted.

Tech12

all shal perrish wrote:
katinlv wrote:Hack a hole in your stock manifold. Weld the turbo on. Run a pipe to the intake, Done. Best 30 seconds of your life!

That's awesome.

Tech12

super cool project man, can't wait for sound/vid clips =)

Tech12

that's just the new "worn in vintage" look the kids like these days ^^

Tech12

those are some respectable numbers. I can't wait to get mine hooked up once I get ahold of some oil lines and tap the pan. So close... =)

Tech12

ok, cool. see, if it wasn't, I'd have your answer.

Tech12

sounds like you already figured it out by swapping ecu's... Also, check to see that the ECU is grounding itself properly. On my KA24DE the bolt that holds the ground wire is between the exhaust mani and the vavle cover. The bolt had vibrated loose enought that it would un-ground the ecu and the car ...

Tech12

is your check engine light coming on when you turn the key?

Tech12

no, they are not. They differ sometimes in outlet, exhaust, and o2 housing flanges.

Tech12

sounds like you're a good candidate for reading some stickies with basic information.

Tech12

150 is a preety nice price for a t28. Basically, you'll want to grip the ends of the blades with your thumb anf index finger and try to wiggle the shaft. If it feels and sounds like a loose tooth, it's probably not a good idea to put on your car.

Tech12

mmmm... maglev bearings

Tech12

Those of you that sprayed, what are your air compressors rated? cfm by psi.

Tech12

looks lright. You don't really need a datalogging option if you have a camcorder.

Tech12

I have a "tuned" stock KA24DE bin if you want, I also have the factory .bin from my car at home on my lap top (at work now)

Tech12

kings_blend wrote:Just make a set of det-cans i made some for less than $20. They will allow you to hear the knock when it occurs when your tuning your car.

Like this?

Tech12

Get a smaller battery or put yours in the trunk, mount the filter on the battery tray?

Tech12

There si a thread on nicoclub.com in the ka-t section about ebay flywheels, worth taking a look.

Tech12

6 puck unsprung = get used to rev matching like a pro.

Tech12

Nice colour, same one I used to paint my bike parts.

Tech12

your piping yells side mount, yet you bumper yells front mount. neat.

Tech12

Tech12

better yet http://www.240sxmotoring.com/s13srt25inpi.html ntake pipe for T25 $15

intake =/= inlet and outlet pipes

Tech12

seriously?

Tech12

ninjatune wrote: Tech12 - I used a toyota exact match body paint spray can from the local auto parts store, light coats

Many thanks

looks great

Tech12

what bov is that?

Tech12

ninjatune wrote: The tails are the ebay clear ones painted red

Thats what I kinda thought, what did you paint them with?

Tech12

I dunno how it is on the biki boards, but when I use my consult cable and data scan/calumsult/whatever, I have to "re-synch" the program to the ecu whenever the ecu looses power (like when you turn the key to start the car) So after you get her running, try closing the program and restarti...

Tech12

I've had that happen. No Idea what it gets caught on. Finally came out after pushing it in and out wiggling the bastard around. You'll know when you get it once the tranny falls on your collar bone

Tech12

I wish the roads here weren't covered in snow and salt. I like your tails, where did you get them?

Search found 51 matches