Search found 311 matches
- Mon May 31, 2010 7:45 pm
- Forum: ECU Tuning
- Topic: Who do I contact for a Haltech PS1000 or Sprint 500?
- Replies: 2
- Views: 1240
I got my haltech 1000 from John, But decided to get a flying lead harness instead of the plug in one. Last I heard he is still selling them, He's the only one selling them right now for the s13 ka24de, he can also make custom harness's for the s14 guys also! I need to give him a call shortly about t...
- Mon May 31, 2010 7:39 pm
- Forum: Dyno Results
- Topic: over 1000 hp k24de nissan
- Replies: 18
- Views: 7259
- Thu Apr 08, 2010 9:43 pm
- Forum: KA-T Tech. Basic
- Topic: wont turn over, starter not engaging
- Replies: 10
- Views: 2493
starter = good fuses = good ground = good check your ign switch ? if its sending 12v right at the conector on the steering column? check for 12v at starter solenoid conector? check for MAIN/HEAVY 12V power source at starter motor? If your getting 12v at the solenoid and at the starter motor then its...
- Thu Apr 08, 2010 9:34 pm
- Forum: KA-T Tech. Basic
- Topic: Best way to splice wires and to wire multiple gauges
- Replies: 22
- Views: 4447
What I ended up doing is run a 10gauge fused wire straight from the positive battery terminal. Hook it up to a relay and power ALL the parts you add to that wire thats switched ON from the relay. And I then used the cig 12v to power the relay on or off by the IGN switch. That way you have a safe pow...
- Thu Apr 08, 2010 9:20 pm
- Forum: KA-T Picture Threads
- Topic: *Post Your Engine Bay Pics*
- Replies: 922
- Views: 417724
- Sat Mar 27, 2010 5:20 pm
- Forum: Dyno Results
- Topic: over 1000 hp k24de nissan
- Replies: 18
- Views: 7259
- Tue Mar 16, 2010 9:29 pm
- Forum: KA-T Tech. Advanced
- Topic: Larger headstuds
- Replies: 57
- Views: 24075
- Sat Feb 27, 2010 10:14 pm
- Forum: KA-T Chat
- Topic: So i did a huge LMFAO!!! dumb brakes
- Replies: 13
- Views: 3220
- Sat Feb 27, 2010 10:08 pm
- Forum: KA-T Picture Threads
- Topic: Not your average Lexus!!
- Replies: 75
- Views: 22217
highway / texas mile + fullybuilt 2jz = GT55 1400+whp :D :D :D :D :D :D :D haha keep us updated Im a big fan of these engines! I would go with the 6spd especially for what you want to us it for, You'll like you're topend alot better with the manual but for traction and launching possibly the th400. ...
- Fri Feb 26, 2010 5:46 pm
- Forum: KA-T Picture Threads
- Topic: The SICKEST PIX Thread
- Replies: 72
- Views: 16797
- Fri Feb 26, 2010 5:40 pm
- Forum: KA-T Chat
- Topic: So i did a huge LMFAO!!! dumb brakes
- Replies: 13
- Views: 3220
- Wed Feb 24, 2010 7:43 pm
- Forum: KA-T Chat
- Topic: So i did a huge LMFAO!!! dumb brakes
- Replies: 13
- Views: 3220
got a tip if you cant switch em over or to lazy lol, unbolt the bottom slidding pin and lift the caliper up so the bleeder is pointing up, put a clamp the pistons and bleed it like that. I had to do that once on this customer car, he brought a delsol in with this nsx type conversion and the rear we...
- Wed Feb 24, 2010 7:39 pm
- Forum: KA-T Chat
- Topic: So i did a huge LMFAO!!! dumb brakes
- Replies: 13
- Views: 3220
got a tip if you cant switch em over or to lazy lol, unbolt the bottom slidding pin and lift the caliper up so the bleeder is pointing up, put a clamp the pistons and bleed it like that. I had to do that once on this customer car, he brought a delsol in with this nsx type conversion and the rear wer...
- Sat Feb 20, 2010 7:13 pm
- Forum: Welding/Fabrication
- Topic: D.I.Y Motor Mounts
- Replies: 33
- Views: 17196
Any DIY mount that uses a bolt that goes right through the mount is worthless IMO.... you might as well just run a steel puck. The tension through the bolt will make for a very solid feeling mount and the rubber will have little effect. I was doing urethane mounts like this for a while and just was...
- Sun Feb 14, 2010 6:58 pm
- Forum: KA-T Picture Threads
- Topic: Polished compressor housing
- Replies: 6
- Views: 2259
I had a dremel kit and used the cylinder looking sandpaper bits for the smooth out the housing then used the cone shaped sanding bits for the edges around the bottom of the snout. after it was all sanded I started sanding the main housing by hand to get it all smooth and shinny after that started po...
- Sun Feb 14, 2010 6:11 pm
- Forum: KA-T Picture Threads
- Topic: Polished compressor housing
- Replies: 6
- Views: 2259
- Sat Jan 16, 2010 8:09 pm
- Forum: KA-T Chat
- Topic: Its been a rough week
- Replies: 17
- Views: 3055
- Sat Jan 02, 2010 2:23 pm
- Forum: KA-T Tech. Basic
- Topic: Car wont start
- Replies: 15
- Views: 3000
- Sat Jan 02, 2010 12:23 pm
- Forum: KA-T Chat
- Topic: i have failed you all...
- Replies: 19
- Views: 3463
- Sun Dec 27, 2009 9:25 pm
- Forum: Introductions
- Topic: Ryan, From southern California...(909/951)
- Replies: 4
- Views: 1308
- Sun Dec 27, 2009 9:20 pm
- Forum: KA-T Chat
- Topic: catch can hoses
- Replies: 5
- Views: 1544
- Fri Dec 25, 2009 6:23 pm
- Forum: KA-T Picture Threads
- Topic: the guy talking about the 2jz..
- Replies: 21
- Views: 3632
- Fri Dec 18, 2009 10:03 pm
- Forum: Dyno Results
- Topic: T3/T04E 60trim 370whp new tune !!!! powercurve fixed
- Replies: 35
- Views: 10775
- Fri Dec 18, 2009 9:53 pm
- Forum: KA-T Picture Threads
- Topic: 91 Sil-eighty Buildin it better, stronger, faster
- Replies: 70
- Views: 17370
- Thu Dec 17, 2009 8:27 pm
- Forum: Dyno Results
- Topic: T3/T04E 60trim 370whp new tune !!!! powercurve fixed
- Replies: 35
- Views: 10775
lol the supra is what brought me all into this years ago, I really dont mind the lag to me the more lag the better for some odd reason lol its like a rush of power when it kicks in, its like nothing nothing nothing then bam your in your seat and trying to hold on. the thing I dont like is a small po...
- Thu Dec 17, 2009 5:52 pm
- Forum: Dyno Results
- Topic: T3/T04E 60trim 370whp new tune !!!! powercurve fixed
- Replies: 35
- Views: 10775
hmm on e85 I dont even think you would need to actually pull timing at 18lbs can anyone confirm this with there own tunes that were made on the dyno? I remember seeing lots of post about e85 with 20ish lbs of boost and the total timing at high load was almost stock by the time they were done. BUT p...
- Thu Dec 17, 2009 5:50 pm
- Forum: Dyno Results
- Topic: T3/T04E 60trim 370whp new tune !!!! powercurve fixed
- Replies: 35
- Views: 10775
haha yeah it does feel alot stronger, and yeah it rained the night before, it stoped in the morning but still everything around the track was damp, gave us couple runs then started raining again, it sucked cause I towed it 6hrs to make it there and it decides to rain :evil: and for the song... I HAD...
- Thu Dec 17, 2009 2:04 pm
- Forum: KA-T Picture Threads
- Topic: my ka-t build
- Replies: 15
- Views: 4532
- Wed Dec 16, 2009 8:18 pm
- Forum: Dyno Results
- Topic: T3/T04E 60trim 370whp new tune !!!! powercurve fixed
- Replies: 35
- Views: 10775
- Wed Dec 16, 2009 2:34 pm
- Forum: ECU Tuning
- Topic: haltech sport 1000s & sensors
- Replies: 16
- Views: 4453
to be honest the tuning software is what brought me into the haltech world, there new software is amazing and it made me turn from the aem, its so much use friendly and you can customize it to what you want to see!!! theres so many options and layouts you can choose from and its pretty basic for som...