Search found 297 matches

by keaser06
Wed Aug 22, 2007 12:26 pm
Forum: KA-T Picture Threads
Topic: official valvecover thread
Replies: 185
Views: 52757

wet sand.. wet sand... wet sand... start with like 600 grit.. then 1000.. then 1500... then 2000.. and sand plenty with the 2000..
by keaser06
Wed Jul 18, 2007 9:47 pm
Forum: KA-T Picture Threads
Topic: deleted
Replies: 40
Views: 10055

the 0 guage will cause better flow and if you get good grounding all the way through the alternator wont actually stress as much causing it to rev a little easier and the better the chassis is grounded and the easier the electricity flows the more spark you will get..
by keaser06
Sun Jul 15, 2007 8:50 pm
Forum: KA-T Picture Threads
Topic: deleted
Replies: 40
Views: 10055

i did same thing on my hatch with 1 gauge wire.. where i only ran one wire it was perfectly fine.. i even did an alt test on the battery while it was in the trunk and it was fine.. i used a battery box from autozone and didnt put the cover on i instead eventually made a hold down bracket for it http...
by keaser06
Wed Jul 11, 2007 6:59 am
Forum: KA-T Chat
Topic: have you heard about this a bov???????????????
Replies: 17
Views: 3966

yeah they said they were still tuning.. and when your running a race car that runs a bunch of boost like that most bov setups give compressor surge at lower boost levels.. i have seen lots and lots of supra guys complaining about having to run dual bov's to get away from this
by keaser06
Mon Jul 09, 2007 10:09 pm
Forum: KA-T Picture Threads
Topic: need some suggestions.
Replies: 15
Views: 3396

red and black with the lip polished good.. ftw
by keaser06
Mon Jul 09, 2007 9:21 pm
Forum: KA-T Picture Threads
Topic: my ka-t
Replies: 5
Views: 2320

Image
Image
Image
Image
by keaser06
Mon Jul 09, 2007 9:19 pm
Forum: KA-T Chat
Topic: A litte more NA power
Replies: 16
Views: 1951

well i have a 93 s13 se and i stomp stock or close to stock 240s and as far as anything n/a i havent run accross anything thats supposed to be close to a stock 240 and lost.. i mean i take out all kinds of stuff just not like mustang gt's or anything like that lol.. and my mods are 3" catback i...
by keaser06
Mon Jul 09, 2007 8:26 pm
Forum: Car Chat
Topic: Weldng on a car.
Replies: 5
Views: 1356

i would (just to be safe) disconnect the battery and ecu.. the battery a def.. the ecu just because i have heard of people frying the ecu while welding
by keaser06
Mon Jul 09, 2007 8:25 pm
Forum: KA-T Chat
Topic: insurance
Replies: 9
Views: 1884

im carrying the bare minimum.. because im poor lol
by keaser06
Mon Jul 09, 2007 8:24 pm
Forum: KA-T Picture Threads
Topic: My new RIDEEE
Replies: 18
Views: 4396

awesome car for the price +1 nice find man.. i paid 1000 for my not running at the time s13.. mind you it just had a leaky injector with bad gas (from sitting for 3 years) and 2 quarts too much oil.. fixed all that and just had rotted hoses/brakes/belts go wrong since i got it a year ago..
by keaser06
Mon Jul 09, 2007 7:23 pm
Forum: KA-T Tech. Basic
Topic: moving from T25 to T28
Replies: 3
Views: 1158

i would put a walbro in for that setup tho..
by keaser06
Mon Jul 09, 2007 7:22 pm
Forum: KA-T Chat
Topic: A litte more NA power
Replies: 16
Views: 1951

put a walbro on.. for 100 its a good mod specially if you put the timing advanced.. put the walbo and a 300zx fuel filter in it.. will increase throttle response and the pump wont die off in higher rpms causing it to seem slower..
by keaser06
Mon Jul 09, 2007 3:08 pm
Forum: KA-T Tech. Basic
Topic: moving from T25 to T28
Replies: 3
Views: 1158

you will be fine untill you can afford to upgrade...
by keaser06
Mon Jul 09, 2007 12:22 pm
Forum: KA-T Tech. Basic
Topic: haelp! recently insalled KA-t won't start
Replies: 13
Views: 2113

+1
by keaser06
Mon Jul 09, 2007 11:12 am
Forum: 240SX Videos
Topic: S14.5 KA-T at the dragstrip
Replies: 3
Views: 1865

not bad not bad.. get some tires that hook and launch a little harder.. with those trap speeds you should be able to hit mid to high 12s
by keaser06
Mon Jul 09, 2007 7:10 am
Forum: KA-T Tech. Basic
Topic: power brace??????????????????
Replies: 3
Views: 830

you COULD make one out of solid steel.. probly a bad idea.. that powerbrace you saw on ebay is to help with the twisting forces of the motor so it will slow it down some and absorb some of it but if its solid it will be like having solid mounts.. no fun
by keaser06
Mon Jul 09, 2007 6:22 am
Forum: KA-T Picture Threads
Topic: my path to ka-t update: 7/8/07
Replies: 25
Views: 6618

dont run anything over stock boost on that t28 and sidemount setup... my buddy did that (i have his sidemount and his stock t25 now) and he melted the sides of his pistons on his sr with the stock sidemount all he had was a new manifold and t28 at 11lbs of boost. soooo with a bigger turbo you have t...
by keaser06
Sun Jul 08, 2007 2:29 pm
Forum: KA-T Chat
Topic: ivan in a big time mag
Replies: 15
Views: 2992

i was unhappy with modified mag article on ivans car..seemed like the whole article was trying to dumb down his car like it wasnt as nice as it is.. they made a 9.15 quarter mile sound slow just by the way they worded it.. just seemed like the article was written by an sr kid :-(
by keaser06
Sun Jul 08, 2007 1:34 pm
Forum: Chat
Topic: ka's whohooo
Replies: 4
Views: 1170

*update*-eh, not changing my view on anything, not the best movie ever, but that being said, not terrible... abou RFID's, is complete crap... i understand that they put them in passports, its just easier than typing a number in, you can track movement with RFID's unless you had readers in REAL clos...
by keaser06
Sat Jul 07, 2007 11:08 pm
Forum: On the Street
Topic: Edged out a modded REX.
Replies: 5
Views: 2251

im wondering too.. i hate evo's but love wrx
by keaser06
Thu Jul 05, 2007 10:57 pm
Forum: KA-T Picture Threads
Topic: KA-T Swap! (pics added 8-14-07)
Replies: 163
Views: 52922

ur the man boot.. glad to keep in contact with you off of here too btw.. ur a good help with your encouragement and such lol.. ur car is hawt.. i need to ride in that biatch one day.. u should come to FL so i can ride in it
by keaser06
Thu Jul 05, 2007 1:07 pm
Forum: KA-T Chat
Topic: Can I get 220whp from this setup
Replies: 20
Views: 3955

ok first off if your goals are around 350 max and you want something fun you could go with the original setup you posted then when its time to jump to 350.. get a disco potatoe.. and better exhaust.. bigger injectors and a tune.. then you can run like 16-20 psi or so.. i believe the disco potatoe (g...
by keaser06
Wed Jul 04, 2007 5:56 pm
Forum: KA-T Chat
Topic: Can I get 220whp from this setup
Replies: 20
Views: 3955

go for it on that setup.. get an safc and an n60 maf and it will run just fine.. after you tune it a little.. back off the base timing some.. i would say for 7psi i would drop it down 3 degrees at the dissy.. maybe up the boost for 220 whp.. with about 10psi on that setup you should get it.. id set ...
by keaser06
Wed Jul 04, 2007 5:34 pm
Forum: KA-T Chat
Topic: Newest KA-T Car
Replies: 51
Views: 14005

s13.5 ftw.. unless its a DD or race car then... s13 ftw.. but for show car or i drive on weekends car.. s13.5 is hawt.. if done right.. i dont like that front bumper ^^
by keaser06
Wed Jul 04, 2007 2:57 pm
Forum: Car Chat
Topic: RANT
Replies: 11
Views: 2742

i think i would willingly put an sr in a 240 but it wouldnt be so that it would be fast i want to do a true jdm conversion 180sx, black top, rhd, kouki tails, type x bumper and sides, and so on.. you know what i mean? and rightfoot thanks for putting something into the forum that wasnt tryin to inst...
by keaser06
Wed Jul 04, 2007 8:48 am
Forum: Car Chat
Topic: Dumbest Things You Ever Saw
Replies: 19
Views: 3257

for your two stories.. i would have to tell the people they are completely retarded.. _________________________________ i worked at autozone for a while too and you get some of the dumbest backwoods hillbillies coming in asking for parts.. heres a few of my stories i had a guy come saying i need one...
by keaser06
Wed Jul 04, 2007 8:38 am
Forum: Car Chat
Topic: RANT
Replies: 11
Views: 2742

i guess your right about arguing with them but they just dont leave my ass alone.. when they ask about my sr and i say ka-t and they say why its juts going to blow up... anythign i reply causes them to just go off on how the sr is built for boost and its low compression stock and without building a ...
by keaser06
Wed Jul 04, 2007 8:27 am
Forum: KA-T Tech. Basic
Topic: looking for pink injector
Replies: 16
Views: 1958

why not just call deatschworks and get the pulse width from them i thought they did full testing on all the injectors they sold before they sold them?
by keaser06
Tue Jul 03, 2007 6:58 pm
Forum: KA-T Tech. Advanced
Topic: Restrictive Electric Fans..??
Replies: 59
Views: 11055

did you try flushing the whole system?? maybe something got in the water jackets of the motor while it was out.. maybe the hg is leaking a little and causing pressure into the system or maybe burning some of the coolant? maybe one of your coolant lines got crossed somewhere on the install into this ...
by keaser06
Tue Jul 03, 2007 6:49 pm
Forum: Car Chat
Topic: RANT
Replies: 11
Views: 2742

RANT

im tired of arguing with sr, rb, or just about any other 240 kid about how the ka is a crappy motor. i just want to try to understand the logic of the shorter stroke and smaller pistons and having to get to 5 grand before you have any power and how it would be fun to drive a car that has much lower ...