Search found 35 matches

by Ruff Ryder 6
Wed Jul 01, 2015 8:08 pm
Forum: DIYAutoTune
Topic: MS3 Pro install troubles
Replies: 1
Views: 7603

MS3 Pro install troubles

Hi all, I have a 240sx that I am trying to get working on MS3 Pro. I have all the other connections made, but when I tried to crank the car I got no RPM. I am attempting to follow this writeup, but there is no mention of MS3 Pro on the page, and the settings change for each type of board and version...
by Ruff Ryder 6
Fri Jan 03, 2014 2:00 pm
Forum: DIYAutoTune
Topic: Wiring VW ignition coils
Replies: 5
Views: 2229

Re: Wiring VW ignition coils

Matt,
That's the exact style I was wanting to use. The ones that have 4 wires. I guess there's is a good chance I'm just confusing myself
by Ruff Ryder 6
Thu Jan 02, 2014 4:45 pm
Forum: DIYAutoTune
Topic: Wiring VW ignition coils
Replies: 5
Views: 2229

Re: Wiring VW ignition coils

After looking at my board, I can't see where/if I even have a coil driver installed on the board. I'd assume this is necessary to run the COP in the first place. Like I said, the previous install was using the igniter from a DSM to run the wasted spark coils. My board: http://imageshack.us/a/img46/8...
by Ruff Ryder 6
Thu Jan 02, 2014 3:25 pm
Forum: DIYAutoTune
Topic: Wiring VW ignition coils
Replies: 5
Views: 2229

Re: Wiring VW ignition coils

Thanks Matt. It's a crimped connector.
by Ruff Ryder 6
Wed Jan 01, 2014 7:57 pm
Forum: DIYAutoTune
Topic: Wiring VW ignition coils
Replies: 5
Views: 2229

Wiring VW ignition coils

So I've got a set of vw ignition coils that I'd like to use. I'm coming from using 4G63 setup and would like to use smart coils to eliminate the added igniter. I'm using a kit not the PNP. What internal changes do I need to make to the board? My current setup has the 5v pull up and my spark output i...
by Ruff Ryder 6
Tue May 26, 2009 6:21 pm
Forum: DIYAutoTune
Topic: Running MS2 Extra
Replies: 19
Views: 8656

Ok so i got my trigger disc in (24+1) and things are good. What i need now is some sort of way to drive a tachometer so i can see what the RPM is on something besides TunerStudio. What are you guys using? Stock tach with the output circuit (if so what resistors did you use)? Aftermarket tach? I need...
by Ruff Ryder 6
Sun May 10, 2009 6:41 am
Forum: KA-T Picture Threads
Topic: Kirk build -Vid is up- DSM ecu, JGS mani, T3/T4, etc.
Replies: 125
Views: 40574

Did you ever figure out how to get the tach to work? I'm not far from hooking up my stuff and wondered if you got yours working or not. I suppose it's not as simple as running a wire from the tach wire from the coil/PTM to the Nissan cluster... I;ll take pictures of what i have tomorrow when it's l...
by Ruff Ryder 6
Sun May 03, 2009 8:40 pm
Forum: KA-T Picture Threads
Topic: At Long Last!!!
Replies: 22
Views: 5582

welcome to another megasquirt user. i just got mine running on the mitsubishi ignition gear as well. hope all works out for you.
by Ruff Ryder 6
Sun May 03, 2009 4:50 pm
Forum: DIYAutoTune
Topic: Running MS2 Extra
Replies: 19
Views: 8656

Update: (yet again) I can't let this slide any longer. i have an event to be at on the 29th. Anyway. i got the car to start and run for a minute or 2 with the 4/2 CAS and the mitsu coil and ignitor. But i'd still like to know why i couldn't get anything when i tried to use it on the falling edge? an...
by Ruff Ryder 6
Thu Apr 30, 2009 7:01 pm
Forum: DIYAutoTune
Topic: Running MS2 Extra
Replies: 19
Views: 8656

Ok, so i have everything hooked up and i have a signal but it's still not correct because all it will show is 50 or so RPMs while cranking then drop to 1 and sporadically repeat that a couple times. something is probably not right with my second input (surprise). I take it from what you said in your...
by Ruff Ryder 6
Sun Apr 26, 2009 9:27 pm
Forum: KA-T Picture Threads
Topic: Kirk build -Vid is up- DSM ecu, JGS mani, T3/T4, etc.
Replies: 125
Views: 40574

Did you ever figure out how to get the tach to work? I'm not far from hooking up my stuff and wondered if you got yours working or not. I suppose it's not as simple as running a wire from the tach wire from the coil/PTM to the Nissan cluster... I;ll take pictures of what i have tomorrow when it's li...
by Ruff Ryder 6
Thu Apr 23, 2009 5:48 am
Forum: DIYAutoTune
Topic: Running MS2 Extra
Replies: 19
Views: 8656

Also is there an easy way to move pins around on your premade harnesses so i can get inputs to the coil and everything on the correct wires? And my dumb self managed to break a pin on the MS2 daughterboard last nite while trying to solder in the new circuit. removing the card is kinda tricky, to me ...
by Ruff Ryder 6
Wed Apr 22, 2009 9:13 pm
Forum: DIYAutoTune
Topic: Running MS2 Extra
Replies: 19
Views: 8656

you've probably already seen this but this is where i was headed with the way mine was set up. http://www.msruns.com/download/file.php?id=5936 But now i've changed it back to the directions in 50a and added a pullup going to C30 I think that he had modified his inputs a little bit more than he had n...
by Ruff Ryder 6
Mon Apr 20, 2009 10:50 am
Forum: DIYAutoTune
Topic: Running MS2 Extra
Replies: 19
Views: 8656

So if i go back to this mod for the first input circuit then i should be fixed?
Image
by Ruff Ryder 6
Sun Apr 19, 2009 7:58 am
Forum: KA-T Picture Threads
Topic: Kirk build -Vid is up- DSM ecu, JGS mani, T3/T4, etc.
Replies: 125
Views: 40574

yeah i have all the emissions stuff removed as well but i have a custom intake manifold and that might run into clearance problems but i believe i can still fit it there. I was just intrigued because i thought that i'd have to get custom wires and wasn't looking forward to doing that. I'll go try to...
by Ruff Ryder 6
Sat Apr 18, 2009 7:36 pm
Forum: KA-T Picture Threads
Topic: Kirk build -Vid is up- DSM ecu, JGS mani, T3/T4, etc.
Replies: 125
Views: 40574

Could i get some more pics and details on how you mounted the coil packs and plug wires? I am going to be running Megasquirt and have my setup use the DSM coil packs. i am about to the stage where i need to mock up placement for this stuff, and i thought for sure that i was headed towards custom plu...
by Ruff Ryder 6
Sat Apr 18, 2009 10:08 am
Forum: DIYAutoTune
Topic: Running MS2 Extra
Replies: 19
Views: 8656

Here are a few pics of my board so you can see what i've done
Image

Image

The red wires are the input for the CAS and the green are the spark mods for the coil packs.
by Ruff Ryder 6
Thu Apr 16, 2009 8:09 am
Forum: DIYAutoTune
Topic: Running MS2 Extra
Replies: 19
Views: 8656

Ok according to the manual i have Tachselect jumpered to XG1 and then i have OptoIn with a 470R with the 5v pullup? i can attach a picture later when i get home from work. I followed KAPower (from MSruns.com) instructions for that circuit. but his other one was a little confusing so i followed the p...
by Ruff Ryder 6
Wed Apr 15, 2009 7:44 pm
Forum: DIYAutoTune
Topic: Running MS2 Extra
Replies: 19
Views: 8656

Thanks. i had been looking at those mods as well as surfing through Miata and DSM forums to try to find the mods i needed to make this work. I've also got a DSM coil and ignitor that i plan to use with the setup. I have the spark mods as shown on those pages but the input mod for the second trigger ...
by Ruff Ryder 6
Mon Apr 13, 2009 4:24 pm
Forum: DIYAutoTune
Topic: Running MS2 Extra
Replies: 19
Views: 8656

Running MS2 Extra

I see on your site all these instructions, but they seem to be for running either MSnSE or just MS2. I've gotten my car to run on MS2 but would like to go to extra. I also have the 4G63 mod done to the dizzy if i can figure out how i need to solder up the board in order to step to MS2. the 4G63 inst...
by Ruff Ryder 6
Thu Apr 09, 2009 5:14 pm
Forum: KA-T Tech. Advanced
Topic: the best intake manifold i have seen..
Replies: 47
Views: 13445

that's pretty nice work for under $500
by Ruff Ryder 6
Sat Mar 14, 2009 7:09 pm
Forum: O & J Performance
Topic: Gato Performance KA24DE Intake Manifold & Turbo Manifold
Replies: 58
Views: 51597

well then in that case i may need to go ahead and fork over the money for a quality setup from you guys. my SSAC manifold blows and i need to get something reliable, expect a call from me monday
by Ruff Ryder 6
Wed Mar 11, 2009 5:48 pm
Forum: O & J Performance
Topic: Gato Performance KA24DE Intake Manifold & Turbo Manifold
Replies: 58
Views: 51597

do you have a downpipe to offer yet? i know i spoke with you a while back and you said you would check on it. i have a 5 bolt AGP/turbonetics T3
by Ruff Ryder 6
Sun Mar 01, 2009 6:14 pm
Forum: KA-T Chat
Topic: Non Sandwich Oil Filter Relocation For KAs
Replies: 83
Views: 24223

got mine last monday as well. great product here fellas
by Ruff Ryder 6
Wed Feb 11, 2009 9:07 pm
Forum: KA-T Tech. Basic
Topic: Manifold/Turbo
Replies: 10
Views: 2182

Liger wrote:Power steering more than likely wont fit and you can probably keep the A/C.

I have the manifold and I don't have either P/S or A/C but there is still quite a bit of clearance around the manifold and I have a 60-1 on there.
pictures on your car please? that would help me out thanks.
by Ruff Ryder 6
Fri Jan 23, 2009 4:25 pm
Forum: DIYAutoTune
Topic: MegaMeet 2009 - April 18th, Suwanee, Georgia
Replies: 4
Views: 3382

I would definitely like to attend this. any chance that i could get some help on my setup if i bring my car? just kidding, sort of...
by Ruff Ryder 6
Tue Sep 09, 2008 2:01 pm
Forum: O & J Performance
Topic: Gato Performance KA24DE Intake Manifold & Turbo Manifold
Replies: 58
Views: 51597

can i get a few more pics of the turbo manifold off the car? like the flange and such? wanna see the twin scrolled, divided goodness :boink:
by Ruff Ryder 6
Fri Aug 22, 2008 2:50 pm
Forum: Welding/Fabrication
Topic: New nnissan project
Replies: 17
Views: 5194

i wasn't looking to just turbo the NA motor, but i was looking to see if the whole TT swap was necessary if i could just get a motorset and do what you've done.
by Ruff Ryder 6
Sun Aug 17, 2008 8:47 pm
Forum: Welding/Fabrication
Topic: New nnissan project
Replies: 17
Views: 5194

i would love to see how this Z32 ends up as i have a NA right now and turbo on a Z32 usually requires an engine swap
by Ruff Ryder 6
Wed Jan 23, 2008 4:56 am
Forum: KA-T Tech. Advanced
Topic: Using a Q45 differential
Replies: 126
Views: 58534

I guess i need to aim this post at poot since i have a similar setup. i have a S13 open diff that i plan to swap an S15 helical into. it's going into a 90 S13 manual coupe without ABS. i would like to get the low Q45 gearing if possible. i have the helical unit and the output shafts for it already. ...