Search found 99 matches

by redlineracer21
Wed Mar 09, 2016 1:36 pm
Forum: 240SX Videos
Topic: Anyone know who this is in the video?
Replies: 4
Views: 5696

Re: Anyone know who this is in the video?

Yea, that's my car. Thank you! I tried to keep as sleeper as possible.
by redlineracer21
Thu Jan 28, 2016 6:35 pm
Forum: Drag Racing
Topic: 9.81 @ 141
Replies: 9
Views: 7121

Re: 9.81 @ 141

Thanks you for the input Greaser. I don't have anyone around here to compare to, just Honda guys on lower power and around 10psi lower boost. They were only seeing a couple degrees increase that day so I figured there had to be something wrong with mine. I might of actually been able to cut a 1.3. F...
by redlineracer21
Thu Jan 28, 2016 9:47 am
Forum: Drag Racing
Topic: 9.81 @ 141
Replies: 9
Views: 7121

Re: 9.81 @ 141

I'm not sure what is the cause yet. My intercooler is mounted high and probably blocked by the bumper to much. I don't think I'm out of the efficiency zone on the turbo but I don't know because bullseye power doesn't release turbo maps. I have to give them a call and see what they say.. I started th...
by redlineracer21
Wed Jan 27, 2016 9:05 pm
Forum: Drag Racing
Topic: 9.81 @ 141
Replies: 9
Views: 7121

9.81 @ 141

Went to the track this past weekend for the first time in many years with this car. Could of been a little better since the car is dialed in for the street. I only got 3 passes to tune it before they kicked me out, but im just happy to finally hit a 9! This was at 33psi probably somewhere around 680...
by redlineracer21
Mon Mar 31, 2014 4:29 pm
Forum: Dyno Results
Topic: 745hp/679tq @ 39psi
Replies: 15
Views: 11498

Re: 745hp/679tq @ 39psi

It peaks early due to the small housing. Builds boost quicker so hp comes on sooner. I run the bc 272s cams.

Thanks rosadoracing! My goal is to just see a 9.99 sec pass. If i can get further that would be awesome.
by redlineracer21
Mon Mar 31, 2014 3:51 pm
Forum: Dyno Results
Topic: 745hp/679tq @ 39psi
Replies: 15
Views: 11498

Re: 745hp/679tq @ 39psi

Sorry i was wrong. This graph was a 4th gear pull and apparently he changed the mph limit for this one. The reason for low power is most likely due to the t3 backside is getting restricted. It really needs to be t4...
by redlineracer21
Mon Mar 31, 2014 9:21 am
Forum: Dyno Results
Topic: 745hp/679tq @ 39psi
Replies: 15
Views: 11498

Re: 745hp/679tq @ 39psi

Fuel setup is dual walboros, -10 feed -6 return. Precision 95lb/hr primaries and 165lb/hr secondaries and e85. Clutch is a 350z specialty z clutch. 5 puck with d21 flywheel. The dyno only went up to 30psi but aem was showing 39ish. The reason the numbers are low was because we had to do 3rd gear pul...
by redlineracer21
Sun Mar 30, 2014 1:29 pm
Forum: Dyno Results
Topic: 745hp/679tq @ 39psi
Replies: 15
Views: 11498

745hp/679tq @ 39psi

Finally took my car to get dyno tuned. Very happy with the numbers, especially for a mustang dyno. All of the pulls were done in 3rd since 4th gear overloaded the dyno... Heres a video my tuner put together for me. http://youtu.be/DByltHOVt2w http://i218.photobucket.com/albums/cc276/skylinewtp21/Mob...
by redlineracer21
Thu Aug 15, 2013 9:31 pm
Forum: On the Street
Topic: my s13 vs. gsxr1000
Replies: 5
Views: 7453

my s13 vs. gsxr1000

Didn't beat him bad like the guy recording says it was more like a fender.

http://youtu.be/GWLrnnmseY8
by redlineracer21
Sun Jun 02, 2013 8:33 pm
Forum: 240SX Videos
Topic: my 240 vs. zx10
Replies: 3
Views: 2214

my 240 vs. zx10

Bad video but it gets a little clearer at the end. Still impressed on the outcome especially from a dig.

http://m.youtube.com/watch?v=8tpij0ylRik
by redlineracer21
Mon Mar 18, 2013 11:36 pm
Forum: Dyno Results
Topic: 609hp/512tq @ 20 psi
Replies: 24
Views: 11819

Not really on az240. Mostly drifters and im not really into that. I just go on there for parts :D

I'll be out of town on the 30th. I wanted to go to that meet but doesn't look like i will be able to.

If school allows me :roll: i will probably be out this weekend at the local meets.
by redlineracer21
Thu Jan 31, 2013 12:31 pm
Forum: Dyno Results
Topic: 609hp/512tq @ 20 psi
Replies: 24
Views: 11819

I use to go out to 35th and union. Haven't recently. That was back when i had this setup in a maroon s13.
by redlineracer21
Fri Dec 21, 2012 1:02 pm
Forum: Dyno Results
Topic: 609hp/512tq @ 20 psi
Replies: 24
Views: 11819

no problem heads been clearanced for the bc 272 cams cams have been degreed to the least amount of overlap with jim wolf cam gears Supertech cam followers (shim under bucket design) Supertech dual valve springs and retainers (the 96lb spring pressure ones) Stock valves and stock porting Fuel pumps a...
by redlineracer21
Tue Dec 18, 2012 12:23 pm
Forum: Dyno Results
Topic: 609hp/512tq @ 20 psi
Replies: 24
Views: 11819

Thanks everyone! The car runs on pump e85. Basic specs are: 9:1 comp pistons Bc 272 cams with dual valve springs Custom intake 95lb/hr primaries 165lb/hr secondaries Cbr 600f4i coils Custom exhaust manifold and downpipe Aem ems series 1 S366 t3 .70a/r v-band with bullseye powers billet comp wheel Vi...
by redlineracer21
Mon Dec 17, 2012 1:11 pm
Forum: Dyno Results
Topic: 609hp/512tq @ 20 psi
Replies: 24
Views: 11819

609hp/512tq @ 20 psi

Went to a dyno day on saturday. Was very suprised to see it make that much power at 20psi on a s366 turbo. The dips in the graph are missfires. The alternator wire was loose and i think fell off at the end of the pull...

Image
by redlineracer21
Mon May 07, 2012 12:21 am
Forum: 240SX Videos
Topic: Post A Vidio of your 2 step/rev limiter/ launch control !
Replies: 62
Views: 26325

aem ems series 1
settings:
-20 degrees retard
5% fuel added
ignition cut 5000rpm
ignition retard 5010rpm
by redlineracer21
Fri May 04, 2012 8:51 pm
Forum: Drag Racing
Topic: 11.3 @ 133
Replies: 9
Views: 4336

I've never been on a dyno, but if you do the calculator based on trap speed and weight of car it says 570 whp. So somewhere around there lol On a third gear pull i see 20psi by about 4700 rpm. That's probably due to my exhaust manifold not being exactly equal length. There's a guy i was talking to t...
by redlineracer21
Thu May 03, 2012 8:30 pm
Forum: 240SX Videos
Topic: Post A Vidio of your 2 step/rev limiter/ launch control !
Replies: 62
Views: 26325

Here's my launch control. A little aggressive but it's fun to scare people that are riding your ass on the streets :twisted:

http://youtu.be/qj-1LECMPDY
by redlineracer21
Tue May 01, 2012 10:10 pm
Forum: Drag Racing
Topic: 11.3 @ 133
Replies: 9
Views: 4336

My setup is:
Bws366 billet wheel t3 @20psi
Custom exhaust and intake
95lb/hr primaries
165lb/hr secondaries
Cbr f4i coils
Built engine
9:1 pistons
272 cams
Stock ported head
Z32 trans
Q45 diff
Aem ems
E85
255/50r/16 mt et streets
by redlineracer21
Mon Apr 30, 2012 9:51 pm
Forum: Drag Racing
Topic: 11.3 @ 133
Replies: 9
Views: 4336

11.3 @ 133

Went to the track this weekend. First time out with drag radials. First run was a 11.5 @ 132 had a bad 60ft 1.9 Second pass i did 11.3 @133. Lowered launch control down to 4500rmp still did a 2.0 60ft. Third pass i did 11.9 @123. Best launch of 1.87. but wastegate blew off. Broke the tires loose in ...
by redlineracer21
Thu Apr 05, 2012 10:58 am
Forum: On the Street
Topic: T76 mustang vs my 240
Replies: 8
Views: 3310

Yes he paid up. The guy that owned the mustang turned out to be pretty cool.
by redlineracer21
Mon Apr 02, 2012 12:03 pm
Forum: On the Street
Topic: T76 mustang vs my 240
Replies: 8
Views: 3310

Thanks guys. Yes the car runs on e85. Corn is amazing :D
by redlineracer21
Sat Mar 31, 2012 1:34 pm
Forum: On the Street
Topic: T76 mustang vs my 240
Replies: 8
Views: 3310

Ya it was a boosted mustang. Said he was on 8-10psi. I think he said he was making 450ish to the wheels. My car is a litttle over 550hp to the wheels at 20psi.
by redlineracer21
Fri Mar 30, 2012 3:47 pm
Forum: On the Street
Topic: T76 mustang vs my 240
Replies: 8
Views: 3310

T76 mustang vs my 240

So we were at this local car meet and i was trying to run some turbo honda. He ended up not wanting to but said he knew someone that would. He calls up his friend to come down. This guy shows up in a fox body mustang on drag radials and skinnys up front. Said he was running 8-10psi of boost. I thoug...
by redlineracer21
Mon Aug 15, 2011 8:18 pm
Forum: ECU Tuning
Topic: Who is running MegaSquirt?
Replies: 38
Views: 16905

ive probably spent around 600 on my ms2 extra, but i have added just about everything you can to it. As far as install it was the biggest pain in the ass for me, but thats because i built the ms2 myself and learned how to tune with it. along with the information being scattered all over the web. Tun...
by redlineracer21
Wed Jul 13, 2011 8:06 pm
Forum: 240SX Videos
Topic: my 2j240 drag racing..
Replies: 3
Views: 2242

This car is sick. I found your build thread on aspeedracing.com. Absoulutely a work of art.

Congrats on meeting your goal!!!
by redlineracer21
Thu Jun 23, 2011 7:36 am
Forum: Drag Racing
Topic: times with new setup
Replies: 4
Views: 2713

Setup includes: Built motor 272/272 cams bw s366 turbo Custom turbo manifold and intake 95lb/hr primary injectors 165lb/hr secondaries Runing e-85 This is basically what it looks like. This was back when I was first building iylt. http://i218.photobucket.com/albums/cc276/skylinewtp21/IMG_0210.jpg [/...
by redlineracer21
Wed Jun 22, 2011 5:07 pm
Forum: Drag Racing
Topic: times with new setup
Replies: 4
Views: 2713

times with new setup

Well my old setup was an sr with a t28 @ 18psi. Was only able to knock off a 12.9@ 112mph. With the ka back in the car I went 12.4 @127mph. Considering this was only at 14psi, I am impressed with the car. If I had some drag radials I think I could of dipped into the 11.
by redlineracer21
Tue Mar 29, 2011 7:40 am
Forum: DIYAutoTune
Topic: sequential injection questions
Replies: 10
Views: 3766

From what I know you need to have the 3.1.0 code uploaded and then runerstudio will have the sequential injection option available. However to run it your injectors have to be on seperate channels and also not to sure on how to set up the actual settings I dont mean to thread jack but if you are try...
by redlineracer21
Thu Mar 24, 2011 5:37 pm
Forum: KA-T Tech. Advanced
Topic: ka24de rod bearing problem. need advice
Replies: 7
Views: 3559

You can get the crank ground down to fit oversized bearings. No need to buy a new one, but you will also need to get the rods reshaped. When you spin a bearing its almost garanteed that the rod is out of round. So either you will need to get new rods or they will be savable by reshaping. Machine sho...