Search found 244 matches

by ZenkiS13
Wed Nov 05, 2008 6:31 pm
Forum: ECU Tuning
Topic: Did E-mance go out of business
Replies: 84
Views: 49545

that is very weird. my tune i got from him worked surprisingly well. n60/t25/stock even when i had problems he'd respond to almost immediately. if not the next day. this guys sounds like a hit or miss on tunes. then again a monkey can tune n60/t25/stock. i've had good luck with this. sorry to hear a...
by ZenkiS13
Thu Sep 25, 2008 5:07 pm
Forum: KA-T Tech. Basic
Topic: Oil restrictor Question
Replies: 8
Views: 1506

im wanting to try a restrictor on mine, but what im worried about is starving the turbo of oil. mine smokes only at dead stops like once a day and im sure its leaking through the compressor side. seems like it dwells in the intercooler, then boost pushes it up to the throttle body and burns on combu...
by ZenkiS13
Thu Sep 25, 2008 5:03 pm
Forum: KA-T Tech. Basic
Topic: Guide To Installing A Bottom Mount T25 Turbo Setup
Replies: 109
Views: 66845

when you had a t25 did you use a restrictor? if so what size?
by ZenkiS13
Sun Aug 31, 2008 4:54 pm
Forum: KA-T Tech. Basic
Topic: Alternatives to prestone
Replies: 15
Views: 2596

anyone try dexcool?


i was curious about this stuff.
by ZenkiS13
Thu Aug 28, 2008 10:26 pm
Forum: KA-T Tech. Basic
Topic: Better Fit: GT28R (S15) Or GT28RS (DiscoPotato)?
Replies: 11
Views: 3236

dude mang!

gt2876r .86 a/r

the only turbo you'll need. good for up to 400 hp.

thats if you're wanting to use a t2 type set up.

but you can do a t3/t3 to4e set up cheaper with a top mount.
by ZenkiS13
Wed Aug 27, 2008 4:59 pm
Forum: KA-T Tech. Basic
Topic: small issues after turboing, suggestions or help?
Replies: 13
Views: 3003

hmmm, the maf seems to be fine. the voltage and airflow readings are nominal. i think its a boost leak. while installing the turbo system, i was modifying the intake manifold and plugging holes. im sure i missed something and have a big leak is there. ill check everything on the intake mani and foll...
by ZenkiS13
Wed Aug 27, 2008 2:59 pm
Forum: KA-T Tech. Basic
Topic: small issues after turboing, suggestions or help?
Replies: 13
Views: 3003

Pay To: nosajton@gmail.com Product Name: n60/370cc/t25 tune Product ID: Quantity: 1 ^^^This is what it says on my paypal receipt jordan. apparently he does do n60/370/t25 set ups. maybe he discontinued the n60 type tunes? EDIT!!!!! I just realized what i might have done wrong. i have my settings 5 i...
by ZenkiS13
Wed Aug 27, 2008 2:44 pm
Forum: KA-T Tech. Basic
Topic: small issues after turboing, suggestions or help?
Replies: 13
Views: 3003

seriously? hmmmm he said he could do it. i have the tune i need to re-email him then. he said he can do pretty much any set up. weird.

ill be back on this one and make sure.
by ZenkiS13
Tue Aug 26, 2008 3:48 pm
Forum: KA-T Tech. Basic
Topic: small issues after turboing, suggestions or help?
Replies: 13
Views: 3003

Update*** not lean under boost. im leaning towards a boost leak. im sure theres small ones somewhere. jason at e-mance said that the j30 o2 sensors are supposed to be used with his tunes, so ill try that and see if that fixes some of my driving issues. if anybody has anymore suggestion or can help, ...
by ZenkiS13
Mon Aug 25, 2008 6:26 pm
Forum: KA-T Tech. Basic
Topic: Having Difficulty Finding Boost Leak
Replies: 6
Views: 1934

bump on this, i am having the same problem.


can anyone give more advice?
by ZenkiS13
Thu Aug 21, 2008 5:47 pm
Forum: KA-T Tech. Basic
Topic: small issues after turboing, suggestions or help?
Replies: 13
Views: 3003

it might be lean under boost, i checked the plugs and they are a white.

i have bkr6e with a .30 gap

im gonna buy some bkr7e tomorrow and gapping them to .28, we'll see if that works.
by ZenkiS13
Thu Aug 21, 2008 5:42 pm
Forum: KA-T Tech. Basic
Topic: small issues after turboing, suggestions or help?
Replies: 13
Views: 3003

I would think that he would have idle issues if it were a leaky injector or o-ring. Maybe it is runnign rich or lean under WOT below 3000rpm. DO you have a wideband o2? If your SAFC is already wired in, check your hight throttle settings. the safc is wired in, but zeroed out. im just using it for t...
by ZenkiS13
Wed Aug 20, 2008 11:15 pm
Forum: KA-T Tech. Basic
Topic: small issues after turboing, suggestions or help?
Replies: 13
Views: 3003

anybody?
by ZenkiS13
Wed Aug 20, 2008 7:00 pm
Forum: KA-T Tech. Basic
Topic: I want to thank you guys here at KA-T
Replies: 5
Views: 1096

yup still does have the lower port.

everything is intact, a few scratches, but still structurally sound.
by ZenkiS13
Wed Aug 20, 2008 6:30 pm
Forum: KA-T Tech. Basic
Topic: small issues after turboing, suggestions or help?
Replies: 13
Views: 3003

small issues after turboing, suggestions or help?

Issues: everything is normal when not in boost, no hesitating, no bucking, drive like n/a when not in boost. BUT, when i put the throttle down hard it will hesitate or lag like mad, then eventually pull hard after 3k rpm at WOT, at about 2.5 k it bogs like crazy. i can barely get up to speed on the ...
by ZenkiS13
Wed Aug 20, 2008 6:06 pm
Forum: KA-T Tech. Basic
Topic: I want to thank you guys here at KA-T
Replies: 5
Views: 1096

importdude wrote:since your not recircing
want to trade my RS for you S?
let me know hahah


good job on the ka-t tho
you want the fsssssssewwwww noise dont you? lol

well iono, i think my bov might be bad. it leaks at decel. i might have to get a new one. wanna sell your rs?
by ZenkiS13
Wed Aug 20, 2008 5:09 pm
Forum: KA-T Tech. Basic
Topic: I want to thank you guys here at KA-T
Replies: 5
Views: 1096

I want to thank you guys here at KA-T

I now have a successful ka-t set up! I've been lurking and asking a few questions, but the hard work and searching paid off real nice. i still have a few kinks to iron out my set up: sr20 smic, piping, and air duct N60 maf Pipingpro.com intake with generic filter greddy type s SAFCII (used for decel...
by ZenkiS13
Sun Jul 13, 2008 10:40 pm
Forum: KA-T Tech. Basic
Topic: knocklite flashing red at idle
Replies: 7
Views: 1566

shift_ka24de wrote:im guessing its picking up the noise from the timing chain guides .. just like the safc

^he is right.

if its an s13 ka. it will make enough noise to trick the knock sensor.
by ZenkiS13
Sun Jul 13, 2008 10:33 pm
Forum: ECU Tuning
Topic: tune ecu is giving me problems!!!
Replies: 15
Views: 2112

if its emance, jason would have had it fixed by now. i wouldnt trust anybody else from ebay.
by ZenkiS13
Sun Jun 29, 2008 5:09 pm
Forum: KA-T Chat
Topic: NOT FOR SALE
Replies: 28
Views: 4194

i wanna buy your car. lol


its super a super clean zenki btw.
by ZenkiS13
Sun Jun 29, 2008 5:08 pm
Forum: ECU Tuning
Topic: Almost done.....safc settings
Replies: 5
Views: 1748

alright alright guys. ill just try something else.


im gonna see if i can use my friend's friend's lm-1.
by ZenkiS13
Thu Jun 26, 2008 4:02 pm
Forum: ECU Tuning
Topic: Almost done.....safc settings
Replies: 5
Views: 1748

well the 370cc match up with the n60 so i know on my safc i'll just need to richen it up a bit on my hi throt settings.

and some fine tuning on my lo throt. i could tune it myself with a wideband, but i've busted way past my budget and need a quick fix for the safc.
by ZenkiS13
Thu Jun 26, 2008 3:45 pm
Forum: KA-T Tech. Basic
Topic: Motor started leaking after changing to synthetic!!!
Replies: 4
Views: 1226

it could be that the standard castrol doesnt have as much additives as the synthetic. As you broke the engine in the tiny particles in the oil gather around the now leaking area. When you switch to synthetic, the extra additives did their job in removing the build up, causing your leak. that or you...
by ZenkiS13
Thu Jun 26, 2008 3:36 pm
Forum: ECU Tuning
Topic: Almost done.....safc settings
Replies: 5
Views: 1748

Not trying to be a dick but what did you search for? http://www.ka-t.org/forums/viewtopic.php?t=8089 i've seen that and analyzed it a few times. i even have this write up saved as a word document saved on my jump drive for quick reference. the tune i need is for n60/370cc/t28 only tune on that thre...
by ZenkiS13
Thu Jun 26, 2008 2:13 am
Forum: ECU Tuning
Topic: Almost done.....safc settings
Replies: 5
Views: 1748

Almost done.....safc settings

I have everything together for my ka-t set up. all i need now is safc settings for an initial set up. i have: s14 t28/n60 maf/ 370cc inj other stuff that might help: 255 walbro sr20 smic greddy type s bov bkr6e .30 gap -5* retarded timing If anybody out there has safc settings for this type of set p...
by ZenkiS13
Thu Jun 26, 2008 1:50 am
Forum: KA-T Tech. Basic
Topic: Guide To Installing A Bottom Mount T25 Turbo Setup
Replies: 109
Views: 66845

n60/t28/370cc right???

what are your safc settings?

HI throt

LO throt

NE pts

and %

can you provide settings jordan?
by ZenkiS13
Sat May 31, 2008 9:40 pm
Forum: KA-T Tech. Advanced
Topic: BOV or no BOV?
Replies: 68
Views: 10285

with only 7 psi/stock amounts of boost a bov shouldnt be really be detrimental. now when running greater amounts like 10 psi or more that will cause loads of retared surge and a bov will be needed. now if its a track car that sees the track every weekend or so then no bov shouldmt harm much. BUT****...
by ZenkiS13
Tue Feb 05, 2008 8:32 pm
Forum: KA-T Tech. Basic
Topic: NO CATCH CAN PCV SYSTEM
Replies: 16
Views: 3144

diagram number #2 will be easy to set up.
by ZenkiS13
Tue Feb 05, 2008 8:20 pm
Forum: KA-T Tech. Basic
Topic: Trying to rebuild T25, can't get the big snap ring off
Replies: 10
Views: 1585

i have the same dilema.

someone help! tips or tricks??
by ZenkiS13
Thu Jan 17, 2008 7:06 pm
Forum: ECU Tuning
Topic: Sooooo confused....
Replies: 5
Views: 1420

ill be getting an e-mace ROM tune and i'll also be running an safc II to fine the the settings even more.