Search found 189 matches
- Thu Feb 23, 2012 7:36 pm
- Forum: KA-T Tech. Basic
- Topic: Front Crank Pulley - Bolt Failure
- Replies: 2
- Views: 796
Front Crank Pulley - Bolt Failure
KA24DE Well the 6 bolts that hold the two-piece front crank pulley together have seemed to disappear? :shock: Is this common? When replacing the front crank pulley, should I put loctite on the 6 bolts? what about the crank pulley main bolt? any special treatement? Please let me know. This is ridicul...
- Wed Apr 06, 2011 5:43 pm
- Forum: KA-T Chat
- Topic: 2871r Camshafts Mods?
- Replies: 4
- Views: 1347
BUMP! Do i need to buy anything else other than Kelford Stage 2 cams for this upgrade? My head is in good shape..so no need for a valvetrain upgrade correct? Adjustable cam gear, or no? Im still on the same turbo 2871r .86 I have a feeling my 2871r might be a tad small for the Kelford Stage 2's...ma...
- Wed Apr 06, 2011 5:39 pm
- Forum: KA-T Tech. Basic
- Topic: 2871r Breaking Up Under B00ST!
- Replies: 11
- Views: 2050
- Tue Feb 22, 2011 1:52 pm
- Forum: KA-T Tech. Basic
- Topic: 2871r Breaking Up Under B00ST!
- Replies: 11
- Views: 2050
- Sun Feb 20, 2011 3:23 pm
- Forum: KA-T Tech. Basic
- Topic: 2871r Breaking Up Under B00ST!
- Replies: 11
- Views: 2050
2871r Breaking Up Under B00ST!
Setup: 2871r NIStune Z32 MAF Stock Plug Wires BRK7E OEM Distributor 15psi Built Block O-Ringed Head So i did a few pulls the other day and it was breaking up pretty good under boost. I would say it did it around 3-4 times. So i stopped obviously, and let the car cool and off brought it back to the s...
- Fri Jan 28, 2011 7:54 pm
- Forum: KA-T Tech. Basic
- Topic: Coolant Temp Going HAM!
- Replies: 8
- Views: 1785
- Wed Jan 26, 2011 4:14 pm
- Forum: KA-T Tech. Advanced
- Topic: z32 transmission
- Replies: 20
- Views: 9801
- Wed Jan 26, 2011 3:50 pm
- Forum: KA-T Tech. Basic
- Topic: Coolant Temp Going HAM!
- Replies: 8
- Views: 1785
when you installed the thermostat did you do it such that the air-leak hole was at the 12-o-clock position? ^This. Plus when filling with coolant you should remove the 10mm bleeder screw in the intake manifold above the coolant inlet. If you do this, and the Tstat is oriented correctly, you should ...
- Tue Jan 25, 2011 12:16 pm
- Forum: KA-T Tech. Basic
- Topic: Best spark plugs for boost?
- Replies: 20
- Views: 8667
- Tue Jan 25, 2011 11:41 am
- Forum: KA-T Tech. Basic
- Topic: Coolant Temp Going HAM!
- Replies: 8
- Views: 1785
Coolant Temp Going HAM!
So i just finished up my KA-T project. Variables: NISMO Thermostat STRi Water Temp Gauge OEM Gauge Cluster (Thermo Gauge) Really Cold Outside 30degrees F Problem: The new problem is it seems that my thermostat does not want to open (NISMO Thermo). My car would run for a while and I would notice my O...
- Thu Dec 02, 2010 10:21 pm
- Forum: KA-T Chat
- Topic: 2871r Camshafts Mods?
- Replies: 4
- Views: 1347
- Thu Dec 02, 2010 10:19 pm
- Forum: KA-T Chat
- Topic: 2871r Camshafts Mods?
- Replies: 4
- Views: 1347
2871r Camshafts Mods?
Ok, so I just popped my first headgasket on my motor. Im sending the head to get o-ringed and am throwing around the idea of tossign a cam into the car. IF i can get away with it, and be totally fine in a perfect world..is there a stage 1 cam out there that will allow me to use my existing OEM valve...
- Tue Nov 16, 2010 1:56 pm
- Forum: ECU Tuning
- Topic: NIStune Shutting Down..HELP
- Replies: 3
- Views: 1179
- Sat Nov 13, 2010 3:48 pm
- Forum: ECU Tuning
- Topic: NIStune Shutting Down..HELP
- Replies: 3
- Views: 1179
NIStune Shutting Down..HELP
My tuner is trying to throw a base tune on the car, so we can drive it to the dyno. And every time he goes LIVE on the NIStune or tries to burn a map onto the ECU..an error comes up and it shuts down the whole program. This in return "messes up" (nicest way possible) the ECU map..and he ne...
- Sun Oct 03, 2010 10:06 pm
- Forum: KA-T Tech. Basic
- Topic: Pressure Plate Bolt Size
- Replies: 8
- Views: 1475
- Sun Oct 03, 2010 2:28 am
- Forum: KA-T Tech. Basic
- Topic: Pressure Plate Bolt Size
- Replies: 8
- Views: 1475
- Sat Oct 02, 2010 2:42 pm
- Forum: KA-T Tech. Basic
- Topic: Pressure Plate Bolt Size
- Replies: 8
- Views: 1475
Pressure Plate Bolt Size
Hey guys im in a HUGE RUSH...and need 6 pressure plate bolts.
I don't know what size they are..can anyone shed some light on their sizing/threadpitch so I can order them up at ACE hardware or something.
Thank you very much!!
Alex-
I don't know what size they are..can anyone shed some light on their sizing/threadpitch so I can order them up at ACE hardware or something.
Thank you very much!!
Alex-
- Sat Oct 02, 2010 12:21 pm
- Forum: Dyno Results
- Topic: Great Dyno day, surprising T-25 numbers!
- Replies: 4
- Views: 3708
- Tue Sep 28, 2010 10:53 am
- Forum: KA-T Tech. Basic
- Topic: ARP Head Studs Re-Torque
- Replies: 9
- Views: 1836
- Mon Sep 27, 2010 10:04 pm
- Forum: KA-T Tech. Basic
- Topic: ARP Head Studs Re-Torque
- Replies: 9
- Views: 1836
- Mon Sep 27, 2010 9:36 pm
- Forum: KA-T Tech. Basic
- Topic: ARP Head Studs Re-Torque
- Replies: 9
- Views: 1836
ARP Head Studs Re-Torque
Going to be starting up and tuning my new motor this week, and I was wondering how many miles you guys usually Re-Torque your ARP headstuds at?
Setup:
ARP head Studs
Felpro Headgasket
Setup:
ARP head Studs
Felpro Headgasket
- Thu Sep 16, 2010 9:28 pm
- Forum: KA-T Tech. Basic
- Topic: Nuts backing off exhaust manifold and wastegate.
- Replies: 3
- Views: 878
- Tue Sep 07, 2010 1:30 pm
- Forum: KA-T Tech. Basic
- Topic: Best way to secure a turbo onto a manifold?
- Replies: 23
- Views: 5513
- Tue Sep 07, 2010 1:00 am
- Forum: KA-T Tech. Basic
- Topic: Best way to secure a turbo onto a manifold?
- Replies: 23
- Views: 5513
- Tue Sep 07, 2010 12:59 am
- Forum: KA-T Tech. Basic
- Topic: Best way to secure a turbo onto a manifold?
- Replies: 23
- Views: 5513
- Sun Aug 29, 2010 10:04 pm
- Forum: KA-T Tech. Advanced
- Topic: my oil pan fab plan, is there a better way? plz let me know
- Replies: 3
- Views: 1696
- Fri Aug 27, 2010 2:19 pm
- Forum: KA-T Tech. Basic
- Topic: S14 Plug Wire Suggestion
- Replies: 4
- Views: 1084
- Thu Aug 26, 2010 1:40 pm
- Forum: KA-T Tech. Basic
- Topic: S14 Plug Wire Suggestion
- Replies: 4
- Views: 1084
S14 Plug Wire Suggestion
Ok, so Im running an S13 head in my S14. So since I have to use an S14 distributor, I need S14 plug wires correct? I want a decent setup for my plug wires, and I see NGK makes a 10.2mm wire. Any feedback on those? I know the Magnecores and Taylors are proven (those are my fall-back options). But if ...
- Mon Jun 07, 2010 11:31 pm
- Forum: KA-T Tech. Basic
- Topic: KA24DE Crankshaft Compatibility
- Replies: 7
- Views: 1727
KA24DE Crankshaft Compatibility
So im looking to pickup a crankshaft for my S14 motor. Which crankshafts are compatible? Im assuming I can use S13 Cranks...
Thanks!
Thanks!
- Mon Jun 07, 2010 11:28 pm
- Forum: Dyno Results
- Topic: Small Ka-T T25 breaking up at 12 psi
- Replies: 30
- Views: 13799