Hi there, if you want i can send you the files? PM me with your email!
Can´t help you with the NVSRAM diagram
Search found 222 matches
- Sun Feb 23, 2020 11:04 am
- Forum: ECU Tuning
- Topic: KA24E-T ROMs Wanted
- Replies: 12
- Views: 10934
- Sat Sep 07, 2019 12:21 pm
- Forum: ECU Tuning
- Topic: KA24E-T ROMs Wanted
- Replies: 12
- Views: 10934
Re: KA24E-T ROMs Wanted
Hello guys, sorry to invade this topic, but i´m working on a Stanza ECU to put on my 89 240SX and i was wondering if, Nomad, can you send me the files you have??
Do you have a U12 .xdf file to read the .BIN file on TunerPro??
Thank you
Do you have a U12 .xdf file to read the .BIN file on TunerPro??
Thank you
- Tue Oct 27, 2015 4:03 pm
- Forum: KA-T Tech. Basic
- Topic: car will not start...
- Replies: 34
- Views: 10313
Re: car will not start...
Hi, so i think (and hope) my ocasional "no start" issue is fixed :) i added a ground from de engine to the chassis and so far, its starting well, every time i turn the key, for about a week, i also noticed the engine is struggling less to start :) will see how it works :) Thanks for the he...
- Thu Oct 08, 2015 5:40 am
- Forum: KA-T Tech. Basic
- Topic: car will not start...
- Replies: 34
- Views: 10313
Re: car will not start...
Ok, so i got some readings, tested the voltage on the positive pin (screw) of the starter and got 12.6v and when i turn the key to the ON position, it drops to arround 12.0v! For testing the resistance i used the ignition wire on the starter, so grounding on the frame and probing were the ignition w...
- Mon Oct 05, 2015 2:50 pm
- Forum: KA-T Tech. Basic
- Topic: car will not start...
- Replies: 34
- Views: 10313
Re: car will not start...
Thanks nissanfanatic, i will test that as soon as i can and post here the numbers i get
To test the starter i´ll put the negative multimeter probe on any ground point (frame, engine) right? Remember, i have the battery on the trunk!
cheers
To test the starter i´ll put the negative multimeter probe on any ground point (frame, engine) right? Remember, i have the battery on the trunk!
cheers
- Sun Oct 04, 2015 4:40 pm
- Forum: KA-T Tech. Basic
- Topic: car will not start...
- Replies: 34
- Views: 10313
Re: car will not start...
Hi there, pulling this from the dead :) So i took the starter to a repair shop, the guy tested it, it was working fine, he opened it and cleaned everything, i installed it back in the engine and it started fine for a couple of days, then, no start again, like i have the battery on the trunk, i´m goi...
- Tue Sep 23, 2014 9:27 am
- Forum: KA-T Tech. Basic
- Topic: car will not start...
- Replies: 34
- Views: 10313
Re: car will not start...
Thanks 500hpKA240sx, i tried starting the engine without pressing the clutch, and no click :) then i pressed the clutch, turned the key and started right away, so the switch is working :) I´ll try pulling the starter out and do the fix you described and see if it solves the problem :) i´ll let you k...
- Mon Sep 22, 2014 7:25 pm
- Forum: KA-T Tech. Basic
- Topic: car will not start...
- Replies: 34
- Views: 10313
Re: car will not start...
Ok, thanks for your video and help, tomorrow i´ll do some more readings, and i will probably wait until the engine gives me another click/no start situation, so i can check the numers! I will remove the starter/solenoid from the engine and take it to a shop, to fix it! I was wondering if this could ...
- Mon Sep 22, 2014 6:44 pm
- Forum: KA-T Tech. Basic
- Topic: car will not start...
- Replies: 34
- Views: 10313
Re: car will not start...
On my test, i didn´t conected the black probe on my battery, because it´s on the trunk, i used the suspension structure! I tested like on the video, and on the solenoids battery pin (Hot side) i get 12.7V, on the other pin (Non hot side), 0.0V! When i turn on the engine, i get a spiking to about 9.0...
- Mon Sep 22, 2014 11:37 am
- Forum: KA-T Tech. Basic
- Topic: car will not start...
- Replies: 34
- Views: 10313
Re: car will not start...
Thanks man you´r the best
- Mon Sep 22, 2014 11:09 am
- Forum: KA-T Tech. Basic
- Topic: car will not start...
- Replies: 34
- Views: 10313
Re: car will not start...
I understand you, it´s very hard
Can you tell me how can i test the signal from key to solenoid? If i read you post correctely, i should be getting a 12V peak on start up (on the solenoid to starter pin), and not 9V, right?
Thanks for the help
Can you tell me how can i test the signal from key to solenoid? If i read you post correctely, i should be getting a 12V peak on start up (on the solenoid to starter pin), and not 9V, right?
Thanks for the help
- Mon Sep 22, 2014 7:40 am
- Forum: KA-T Tech. Basic
- Topic: car will not start...
- Replies: 34
- Views: 10313
Re: car will not start...
Ok, so i tested the solenoid, from what i was able to see, the solenoid has 2 screw type pins, one is for the battery cable and the other has a cable that goes to the starter, i measured them both, and with the engine off, the battery cable pin reads 12.7V and when its started, drops to 9.0V and goe...
- Sun Sep 21, 2014 1:16 pm
- Forum: KA-T Tech. Basic
- Topic: car will not start...
- Replies: 34
- Views: 10313
Re: car will not start...
Ok, so i just tested the continuity on the negative/ground wire and it´s ok, as far as the multimeter says, gives a constant beep! About testing the solenoid, and to be honest, i didn´t understand your explanation :( Sorry Can i test it without removing it from the car? I can see a bolted cable that...
- Fri Sep 19, 2014 2:51 pm
- Forum: KA-T Tech. Basic
- Topic: car will not start...
- Replies: 34
- Views: 10313
Re: car will not start...
I haven´t tested the continuity, i´ll have to do that, what numbers should i see on the multimeter?
Thank you
Thank you
- Fri Sep 19, 2014 10:07 am
- Forum: KA-T Tech. Basic
- Topic: car will not start...
- Replies: 34
- Views: 10313
Re: car will not start...
I tested the battery voltage before a took it out the garage 5 days ago! The car was sitting on the garage for about 3 weeks, battery disconnected, so i tested it and read 12.5v, then conected the cables and started the engine, started at the second turn of the key, and with it running it read 13.9v...
- Thu Sep 18, 2014 3:18 pm
- Forum: KA-T Tech. Basic
- Topic: car will not start...
- Replies: 34
- Views: 10313
Re: car will not start...
Glad you found the solution for you
I forgot to say, i relocated my battery to the trunk, used brand new and thicker cables!
I forgot to say, i relocated my battery to the trunk, used brand new and thicker cables!
- Thu Sep 18, 2014 2:32 pm
- Forum: KA-T Tech. Basic
- Topic: car will not start...
- Replies: 34
- Views: 10313
Re: car will not start...
Hi 500hpKA240sx, did you ever got to solve the problem? I´m having the same problem on my KA24ET, some times starts without any issues, but when it starts, i noticed, it sounds like its struggling... and some other times, nothing, just the click when i turn the key! I have checked the battery and it...
- Sat Jul 13, 2013 6:51 am
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80253
Re: KA24ET Project!
Hi guys, just leting you know the car is still alive and well, after a couple of years away from the tracks, for €€€€ reasons, i finaly took it this last weekend and it handled well, here´s some pics... http://imageshack.us/a/img526/6765/q3yu.jpg http://imageshack.us/a/img708/596/m8sc.jpg http://ima...
- Wed Oct 17, 2012 3:09 am
- Forum: ECU Tuning
- Topic: calumsult or conzult not working
- Replies: 18
- Views: 4661
- Tue Oct 16, 2012 4:10 am
- Forum: ECU Tuning
- Topic: calumsult or conzult not working
- Replies: 18
- Views: 4661
- Tue Oct 16, 2012 3:33 am
- Forum: ECU Tuning
- Topic: calumsult or conzult not working
- Replies: 18
- Views: 4661
- Wed Jun 20, 2012 2:59 am
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80253
- Mon Sep 05, 2011 11:46 am
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80253
hi guys, i´m back, i´ve been driving the car N/A without problems, I should install the turbo in the next week or so, I had a leak on the turbo manifold, took it to the shop to resurface the flanges, should recieve it in the next few days. I also got some Stainless Steel bolts to replace the ones th...
- Tue Aug 23, 2011 10:04 am
- Forum: SOHC KA-T
- Topic: Best exhaust?
- Replies: 5
- Views: 1808
- Tue Aug 23, 2011 8:10 am
- Forum: SOHC KA-T
- Topic: Best exhaust?
- Replies: 5
- Views: 1808
- Tue Aug 23, 2011 7:34 am
- Forum: SOHC KA-T
- Topic: Best exhaust?
- Replies: 5
- Views: 1808
Best exhaust?
Hi guys, i need your help with this subject, i have a 89 240SX with a KA24E, and currently i have a stainless steel 3" (76mm) exhaust system with a 4.5" (114mm) tip, similar to the one on the picture, http://img194.imageshack.us/img194/8392/89240sx.jpg but the system is quite loud and i wo...
- Thu Mar 10, 2011 1:01 pm
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80253
So i installed everything the same way i removed them, first i set the crankshaft on TDC at the compression stroke, then i removed the distributor cap, marked the position of the rotor, as i was removing the pump body the spindle came with it, so i bolted the pump in place to check the half moon pos...
- Thu Mar 10, 2011 7:44 am
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80253
Hi, i need your help, on the install procees linked above and on the manual it says i need to align the hole on the spindle with the hole on the pump, but if i do that the distributor rotor will be on a diferent position? When i removed the old pump the holes where on opposite positions, should i in...
- Wed Mar 09, 2011 4:26 pm
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80253
Ok thanks, i have one last question, What means TDC on compression stroke? From what i understand is when the nº1 piston is at the top, and i think a good way to check this, is removing the nº1 spark plug and use a screw driver or better, some kind of plastic stick, put it on the hole and it shoudn´...
- Wed Mar 09, 2011 3:21 pm
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80253