Search found 351 matches

by rebeltshead
Sat Jul 06, 2013 3:33 pm
Forum: KA-T Tech. Basic
Topic: stripped KA/5spd swap/break in start issue.
Replies: 16
Views: 2014

Re: stripped KA/5spd swap/break in start issue.

Okay so I'm kind of stupmed but have a lead....which sensor readings will cause an injector to not fire at all???
by rebeltshead
Mon Jun 17, 2013 3:22 pm
Forum: KA-T Tech. Basic
Topic: stripped KA/5spd swap/break in start issue.
Replies: 16
Views: 2014

sorry I meant *NOID light up there. lol

so zero signal to injectors
by rebeltshead
Sun Jun 16, 2013 6:43 pm
Forum: KA-T Tech. Basic
Topic: stripped KA/5spd swap/break in start issue.
Replies: 16
Views: 2014

So I hooked up a mood light to it and a fuel pressure tester. Negative reading on both... Now need to figure out the injector circuit and what sensors affect it. Also....pump works as I tested it with the lines off and it was dumping fuel everywhere. So maybe FPR is bad?? Bought a new filter because...
by rebeltshead
Sat Jun 15, 2013 2:47 pm
Forum: KA-T Tech. Basic
Topic: stripped KA/5spd swap/break in start issue.
Replies: 16
Views: 2014

Fuel line are hooked up right. Going to go mess with it tonight.

If my injectors are seized could I use something to free them up or just need new ones? I have another rail full of stock injectors but they have also been sitting.
by rebeltshead
Mon Jun 10, 2013 9:58 am
Forum: KA-T Tech. Basic
Topic: stripped KA/5spd swap/break in start issue.
Replies: 16
Views: 2014

Thanks, will check that today. May just jump them to the battery.
by rebeltshead
Mon Jun 10, 2013 8:51 am
Forum: KA-T Tech. Basic
Topic: stripped KA/5spd swap/break in start issue.
Replies: 16
Views: 2014

stripped KA/5spd swap/break in start issue.

So I have recently 'finished' my first engine build/ 5spd swap simultaneously. By finished I mean put together as it will not fire. Cranks normally the first time I tried. After the car was apart for a year and a half. What's been done to it: 1993 block 1996 head/other components 248/248 cams i/h/e ...
by rebeltshead
Tue Apr 16, 2013 8:32 pm
Forum: KA-T Tech. Basic
Topic: Front cover RTV gasket - beside the o-ring question
Replies: 3
Views: 753

Right, I see that and it doesn't show which groove to put it in or if in between them.


And it's the M8 directly below the o-ring.
by rebeltshead
Sat Apr 13, 2013 10:04 am
Forum: KA-T Tech. Basic
Topic: Front cover RTV gasket - beside the o-ring question
Replies: 3
Views: 753

Front cover RTV gasket - beside the o-ring question

Okay so I'm about halfway through my build and getting ready to put the front cover on... While applying RTV to the lower front cover I noticed there are two little ruts beside the oil passage o-ring but in the FSM there is only one line of gasket. As this is a high risk area I have to ask.... Which...
by rebeltshead
Fri Apr 12, 2013 5:57 pm
Forum: KA-T Picture Threads
Topic: HI-COMP KA24DE W/12MM HEADSTUDS E85
Replies: 88
Views: 21204

Really loving this build....

I'm all eyes and ears :D
by rebeltshead
Tue Dec 18, 2012 5:42 pm
Forum: Chat
Topic: thought Id share this joke
Replies: 5
Views: 1658

bahahahahaha
by rebeltshead
Tue Dec 18, 2012 5:41 pm
Forum: Chat
Topic: Sushi Uni
Replies: 12
Views: 2174

wow that's crazy..may try but an early one for sure. lol
by rebeltshead
Fri Dec 14, 2012 8:14 pm
Forum: KA-T Tech. Basic
Topic: Bearings. Enginetech = King?
Replies: 5
Views: 847

I called King Engine bearings today. They are re-packaged Kings! Now that I look closer, Kings logo is stamped into them. haha

Thanks for the other info as well, guys!
by rebeltshead
Fri Dec 14, 2012 12:49 am
Forum: KA-T Tech. Basic
Topic: KA-not.a.t
Replies: 8
Views: 1179

You don't need sohc rods, use DE ones. They are the same anyways I THINK . :?:Let me post my setup: 93 KA SOHC NPR pistons, rings, and wrist pins Enginetech/King bearings ARP headstuds, rodstuds, and mainstuds 370cc injectors Walbro 255 White bunny clutch setup s13 hot cam swap 4-2-1 long tube heade...
by rebeltshead
Fri Dec 14, 2012 12:40 am
Forum: KA-T Tech. Basic
Topic: Bearings. Enginetech = King?
Replies: 5
Views: 847

I was but these are half of the price and I am sooper dooper budgeted. So if they are legit, it will be reassuring. lol
by rebeltshead
Thu Dec 13, 2012 12:07 pm
Forum: KA-T Tech. Basic
Topic: KA-not.a.t
Replies: 8
Views: 1179

I'm using the NPR OEMish pistons designed for the SOHC KA. Ups the compression and NPR is an OEM supplier. Pistons, rings, wristpins, and pin retainers were $100 on ebay. This seems like what you are looking at. haha

I will add more when I get off work!
by rebeltshead
Tue Dec 11, 2012 2:43 pm
Forum: Chat
Topic: Sushi Uni
Replies: 12
Views: 2174

What is balut? lol
by rebeltshead
Tue Dec 11, 2012 1:46 pm
Forum: KA-T Tech. Basic
Topic: Bearings. Enginetech = King?
Replies: 5
Views: 847

Bearings. Enginetech = King?

Okay so I just got a crank turned at my local machine shop and got bearings. The guy said he was getting me King bearings. So after getting everything on the way back home with fresh crank and bearings I realize the boxes say Enginetech so I call him and he says they are the same. Can anyone verify?...
by rebeltshead
Sun Dec 02, 2012 9:31 pm
Forum: Chat
Topic: Sushi Uni
Replies: 12
Views: 2174

Ah, eel is amazing. How were jellyfish and alligator? I'd try anything once. Octupus and squid were disappointing but I love fried calamari. I wish I could too haha


However I will never mix sushi and alcohol EVER again....
by rebeltshead
Tue Nov 27, 2012 2:05 am
Forum: Chat
Topic: Sushi Uni
Replies: 12
Views: 2174

Sushi Uni

Anyone ever had Uni sushi (Sea Urchin)? I tried some and was disappointed a bit, I think it was supposed to be different from what I read online.

Also turns out that it is basically a sea urchins balls....lmfao

whatev
by rebeltshead
Tue Nov 27, 2012 2:03 am
Forum: Chat
Topic: Pics I took of Northern Lights.
Replies: 13
Views: 2595

Absolutely beautiful. Can't wait to see them in person. I will, one day.
by rebeltshead
Tue Nov 13, 2012 9:40 pm
Forum: KA-T Chat
Topic: ltb s15 front bumper (s14.5 conversion)
Replies: 9
Views: 1675

dang i'll ask around again
by rebeltshead
Tue Nov 13, 2012 9:36 pm
Forum: ECU Tuning
Topic: high CR, NA KA tuning solution Qs
Replies: 6
Views: 1248

I didnt think about the dual pumps as a backup, thats not a bad idea at all for the track. Its very flexible, almost identical to nistune but its not realtime. You can change a whole lot of stuff in the software, you also get launch control and with consult you can get live data readouts. you can g...
by rebeltshead
Sun Nov 11, 2012 11:43 pm
Forum: KA-T Chat
Topic: ltb s15 front bumper (s14.5 conversion)
Replies: 9
Views: 1675

by rebeltshead
Sun Nov 11, 2012 11:40 pm
Forum: KA-T Chat
Topic: ltb s15 front bumper (s14.5 conversion)
Replies: 9
Views: 1675

I will put an add up on a local forum
by rebeltshead
Sun Nov 11, 2012 9:36 pm
Forum: ECU Tuning
Topic: high CR, NA KA tuning solution Qs
Replies: 6
Views: 1248

Dual Walbros is for my type of racing, not because I need that amount of fuel. haha. There are cars running half my power goal with dual pumps. One is the other pump's fail safe.


Details on chipped ecu and willem? How flexible and modifiable are they?
by rebeltshead
Sun Nov 11, 2012 12:09 pm
Forum: ECU Tuning
Topic: high CR, NA KA tuning solution Qs
Replies: 6
Views: 1248

Can't believe I missed this but it's a

OBDII 1996 Automatic ECU

But of course it will be 5spd.
by rebeltshead
Sat Nov 10, 2012 4:12 pm
Forum: Chat
Topic: obama?
Replies: 46
Views: 5242

Now we are a nation, divided.
by rebeltshead
Fri Nov 09, 2012 7:13 pm
Forum: ECU Tuning
Topic: high CR, NA KA tuning solution Qs
Replies: 6
Views: 1248

Also, supakat sent me some good Calum links. Looks like alot of DIY tuning which i have no experience in. But I could be up to the task.

However, this is my daily we are talking about.
by rebeltshead
Fri Nov 09, 2012 6:54 pm
Forum: ECU Tuning
Topic: high CR, NA KA tuning solution Qs
Replies: 6
Views: 1248

high CR, NA KA tuning solution Qs

Hello, I am piecing together a NA high compression KA and have no earthly idea what I am doing for tuning....or how to do it. Okay to get this out of the way: Why NA? Because, racecar. No, but really, I will be restricted to NA for my class. My setup: New NPR SOHC flat pistons (like unadjusted 11.2:...
by rebeltshead
Wed Nov 07, 2012 8:04 pm
Forum: Chat
Topic: I went as a turbo for Halloween...lol
Replies: 24
Views: 5460

yes I am I just posted a WTB vlsd driveshaft post. lol