www.ka-t.org

jpadilla12 wrote:Nice numbers. What kind of oversize valves is he running?

Ferra not Supertech

BRAD D wrote:Is that the AFR you want to see on pump when you are pushing it?

I made 400whp pretty easy.

No we are still going to lean it out to about 10.5:1 - 11.0:1 since thats it alot of boost to be running on pump. I made 412rwhp @ 18lbs. Goofy ass KA-T

hell yea!!! its vids like this that will make people love going KA-T..... where did Josh get that magic turbo from? :D must have magic dust built into it...hehe i hope he has fun with his car....i know he's been really anxious about it! tell his ass to get active on here and post.... Im here you! T...

I watched the video... car looks great but don't blame the coilovers. First of all, do a better burnout. Those were pretty weak and it almost looks like you're on a open diff. You need to work on your launching. You keep bogging it at the start. Bring the rpm real high and use the clutch to apply t...

I watched the video... car looks great but don't blame the coilovers. First of all, do a better burnout. Those were pretty weak and it almost looks like you're on a open diff. You need to work on your launching. You keep bogging it at the start. Bring the rpm real high and use the clutch to apply t...

Great nimbers! 9.8:1 isn't that real fat? I would tune for around 11.5-12:1. -Jeramy ^^^ I wouldn't tune that lean if you're pushing the limits of 91 octane. Awesome numbers man, maybe lean to mid-high 10's and should see some healthy yet safe gains. Any desire to do a race gas tune? Running 93 oct...

Dynoed my car a couple days ago and made impressive pump numbers. 388rwhp/376rwtq @ 15lbs 442rwhp/420rwtq @ 22lbs Mods: '96 original KA24DE Bored and plate-honed block 8.5:1 Weisco forged pistons with Weisco file-fit rings Crower forged rods and rod bolts JWT camshafts Clevite main and rod bearings ...

P4rD0nM3 wrote:F! I OWN CHAT! Got owned again. Goddamit. I'll just keep every video I find in my computer then. Hehe. It's ok bro I don't take offense when people say that. They say that i'm slow at it.

That clip is from the Jackie Chan movie "Who Am I?". Funny move..

I wouldn't make it in cali...stupid laws on everything here in ga...I only got a "cant you afford a better muffler" from police...and I run 3" dp, unresonated exhaust na Come to alabama, sure their migth be some jack ass rednecks around but we have no emmisions and you run you car wi...

**UPDATE** Well progressive low balled me (2k less than what i paid for it!) and Im in the middle of getting USAA involved to take care of it. If anything I guess Ill have to sue. Id rather not waste the time or the money. My mid back still hurts aswell unless I take the muscle relaxers/pain killer ...

damn that sucks dude. glad u are ok as well. hopefully you'll get compensated fairly to be able to do exactly what u want with the money afterwards. i can see your thinking already (cheaper S13 = more KA-T parts!) haha Yes the car is totaled, the frame is off by 1.5 inches.. haha your right man ;) ...

wow i would be SOO MAD. If you have all the receipts you can MAKE the insurance company pay for them. THis is what you do. 1. Find the receipts and tell them to take care of it. if they do awesome, if they dont go to step 2. 2. Hire a lawyer and sue the lady for personal loss. you are not actually ...

qu0vad1s wrote:ooooh man that's bad will it be totaled or you'll repair it?

Totaled.. Im trying to strike a deal with her insurance company.. they will pay for my coilovers and the labor. haha maybe my wheels aswell..

We will see! S13 KA-T here i come..

Josh

http://www.neoamd.com/wreck/16.gif http://www.neoamd.com/wreck/17.gif http://www.neoamd.com/wreck/18.gif http://www.neoamd.com/wreck/19.gif http://www.neoamd.com/wreck/20.gif http://www.neoamd.com/wreck/21.gif YES that is the frame the car is sitting on with some bolts ripped off.. and yes that is ...

Story: Just got done takingmy Exam at AUM (Auburn University Montgomery) and was heading towards eastchase when a ladypulled out from that median right before I85. I hit her going about 55mph. She was at fault and received a tickect aswell. Airbags suck and they hurt, plus they smell like crap (talc...

Driftin180sx wrote:I will post some more when i get them resized...... And get the ones off of my computer at home..

After Im done with my KA-T car im going back to another RX-7.. I loved my 3rd gen.. stockt iwins though.. 668rwhp! Jesus! 2 rotor? GT42R +? 35psi?

Josh

Havn't seen anyone else discussing stroker kits. I was just wondering if I was the only one. The stroker kit I ordered makes the 2.4 into a 2.8. My motor right now is at da machine shop getting bored out and getting the crank installed. It won't be out till next March cuz of winter time. I'll be ha...

I have yet to have an issue with a Crower rod. We had ONE fail due to bolts breaking in a MKIV Supra making WELL over the rated 200 HP / rod so that is to be expected. Crower rods are in our world record holding KA24DE which makes around 750 crank HP. I have talked to Brian Crower about the rods ho...

just wanted to introduce myself....no real need, but i'm bored. names Rob...i'm from western NC, Taylorsville. i'm just getting into 240's...but have been in cars for a LONG time. I've spent most of my time on hondas....last one was a 2.1L n/a ITR that RLZ did for me...and currently i'm daily drivi...

WTF? Why are you going to start arguing Hondas on a Nissan board? Were you never taught to stay on topic when writing? Jeez.... Now give us your goal so we can at least give you some kind of recommendation of what to do as far as your car is concerned. Just have a **** ton of fuel (dual hardwired w...

S14Dude wrote:wow man. that lexus was

even the RB S14 was quicky quick. nice vid!

My old car, its forsale right now for 10k! haha

Hell of a deal!!!!!!!!

Josh

nissanfanatic wrote:118 would mean close to 380whp. I highly doubt that will happen at 15psi. And it woudl actually mean more due to the S14 being heavier.

Nice job Anthony. Kick-ass reaction time!

the pt61 should do it..

went to the track for fun to see what my street setup i drive on normally, runs 15psi full exhuast (crap crush bent 3" downpipe extention getting replaced today) nitto 275/40/17 555r type II at daily driven air pressure PUMP GAS 12.2 http://nissaninfiniticlub.net/photopost/data/500/1849NEW_Pic...

papapump wrote:this is the size i am running, it fits perfect and you dont have to cut much. The core is fully exposed out of the original front opening and the end tanks are hidden, giving a great sleeper look

Yummy.. Sweet, Im just concerned about fitting in the my kouki front.. damn 97s...

Josh

I'm looking for a nice sized IC to fit under my Kouki front bumper.. Im going to cut most the bumper off but I'm not sure if the 31.5x8x3.5 will fit even with all the cutting I'll be doing.. The core mentioned is a precesion core.. Anyone have some links to any 27-29x7-8x3.5? Setup is almost done, h...

turbo240ka24det wrote:I have some videos to upload, does this site host them and if not, who is hosting all these videos in the forum?

What are they off? I may host them..

HOLY ****! This was on a PT61 with a log manifold? Jesus bro..

Josh

98s14inaz wrote:Not to thread jack you but check out RPS as well. They make really good quality clutches, at least from my experience.

I am, read my first post

The only thing that ACT lists as being different (check the part #s) is the throw-out bearing. I don't know why this would be different, so I would probably ask about that. They have it listed as the DOHC S13 and Z32 NA are the same, but different from the S14 and SOHC S13, that are the same. Odd. ...

Are they different? I know ACT sells different ones based on year but RPS/SPEC dont.

Just wondering becuase i have a bud with an RPS clutch but its was in his S13 and was just wondering if it would fit!

Josh