Search found 304 matches
- Sat Sep 13, 2014 3:26 pm
- Forum: KA-T Tech. Advanced
- Topic: ka24de only runs with maf unplugged
- Replies: 19
- Views: 8844
Re: ka24de only runs with maf unplugged
well now im pretty upset. my idler pulley bolt was loose and stripped, causing some problems of course it got bad enough that when I realized there was a problem I grabbed the rotor and could turn it freely. almost **** my pants at this point. no clue if my 300$ new timing kit is any good anymore. 8...
- Sat Sep 13, 2014 12:49 pm
- Forum: KA-T Tech. Advanced
- Topic: ka24de only runs with maf unplugged
- Replies: 19
- Views: 8844
Re: ka24de only runs with maf unplugged
also I have 2 or 3 knock sensors and 2 coolant sensors
- Sat Sep 13, 2014 12:46 pm
- Forum: KA-T Tech. Advanced
- Topic: ka24de only runs with maf unplugged
- Replies: 19
- Views: 8844
Re: ka24de only runs with maf unplugged
so a lot has happened, got it running, replaced all intake gaskets, started doing the same thing as before. now it has a lot less vacuum leaks and is therefore demanding more fuel. I have an 8 day permit on the car started today so its kinda frustrating also I don't have a gauge cluster in the car a...
- Sat Sep 06, 2014 7:12 pm
- Forum: KA-T Tech. Advanced
- Topic: ka24de only runs with maf unplugged
- Replies: 19
- Views: 8844
Re: ka24de only runs with maf unplugged
cut 1 wire coolant sensor and held it against while a friend started car it still died. getting frustrated with this !! drift event tomorrow I cant even drive to. anyone help? all the searching ive done no one ever figured this out thread ends and one guy sold his car. Saskatchewan winter is coming ...
- Sat Sep 06, 2014 5:49 pm
- Forum: KA-T Tech. Advanced
- Topic: ka24de only runs with maf unplugged
- Replies: 19
- Views: 8844
Re: ka24de only runs with maf unplugged
I dont have any coolant in the car and 1 wire coolant temp sensor is broken. Could this do it? Also engine harness is stock, all other wiring came from another car.
- Sat Sep 06, 2014 5:26 pm
- Forum: KA-T Tech. Advanced
- Topic: ka24de only runs with maf unplugged
- Replies: 19
- Views: 8844
Re: ka24de only runs with maf unplugged
I bought sensorkleen and sprayed down a bunch of connectors took off iacv and sprayed it like crazy double grounded tps etc cant figure it out.
- Sat Sep 06, 2014 5:24 pm
- Forum: KA-T Tech. Advanced
- Topic: ka24de only runs with maf unplugged
- Replies: 19
- Views: 8844
Re: ka24de only runs with maf unplugged
Yes sorry. Stock maf. Fully built head stock ecu stock bottom end fidanza new oem injectors and dc sport 421
- Sat Sep 06, 2014 1:23 pm
- Forum: KA-T Tech. Advanced
- Topic: ka24de only runs with maf unplugged
- Replies: 19
- Views: 8844
Re: ka24de only runs with maf unplugged
codes are
12,13,21, and 34.
12,13,21, and 34.
- Sat Sep 06, 2014 1:22 pm
- Forum: KA-T Tech. Advanced
- Topic: ka24de only runs with maf unplugged
- Replies: 19
- Views: 8844
ka24de only runs with maf unplugged
Hi. Recently got my ka running and I have searched about my problem with no avail. With maf plugged in it runs good and dies after 4 seconds, but with it unplugged it runs like any other ka in limp. Next is to shoot rear sensors with cleaner I cleaned my maf and double grounded it. Maf reads 0.7x at...
- Sun Aug 24, 2014 11:34 am
- Forum: KA-T Tech. Advanced
- Topic: ignition toggle switch
- Replies: 14
- Views: 4681
Re: ignition toggle switch
alright guys I have done a lot since my last post here and I am again looking for help. yesterday I was trying to start my car, between my ignition switch and the plug, there is some exposed wire where the previous owner had a security system tapped in. one of the wires grounded out on the steering...
- Sun Aug 24, 2014 11:31 am
- Forum: KA-T Tech. Advanced
- Topic: ignition toggle switch
- Replies: 14
- Views: 4681
Re: ignition toggle switch
alright guys I have done a lot since my last post here and I am again looking for help. yesterday I was trying to start my car, between my ignition switch and the plug, there is some exposed wire where the previous owner had a security system tapped in. one of the wires grounded out on the steering ...
- Wed Aug 20, 2014 7:57 pm
- Forum: Dyno Results
- Topic: 775whp
- Replies: 67
- Views: 36352
Re: 775whp
erwin i am the member who bought your manifold if you could please text me i have an important question about the vg30e timing after heads have been removed google shows nothing and i know you'd be able to help. need my dd 95 pathfinder running again after rebuilding heads much appreciated
- Wed Aug 20, 2014 4:51 pm
- Forum: KA-T Picture Threads
- Topic: official build thread
- Replies: 300
- Views: 76225
Re: official build thread
update !
- Sun Aug 17, 2014 10:08 am
- Forum: KA-T Tech. Advanced
- Topic: ignition toggle switch
- Replies: 14
- Views: 4681
Re: ignition toggle switch
hey no problem man, I really appreciate the help!
- Fri Aug 15, 2014 5:48 pm
- Forum: KA-T Tech. Advanced
- Topic: ignition toggle switch
- Replies: 14
- Views: 4681
Re: ignition toggle switch
yes i still have everything viper
- Thu Aug 14, 2014 9:05 pm
- Forum: KA-T Tech. Advanced
- Topic: ignition toggle switch
- Replies: 14
- Views: 4681
Re: ignition toggle switch
as my car sits : no chassis harness at all keyless ignition is the goal. from my research orange wire #34 needs to be grounded and green wire #7 needs to have power, so here is my setup right now. what should I add? obviously there is a lot more to making this work without the chassis harness but th...
- Thu Aug 14, 2014 4:29 pm
- Forum: KA-T Tech. Advanced
- Topic: ignition toggle switch
- Replies: 14
- Views: 4681
Re: ignition toggle switch
Alright this is great thank you viper and yeah keyless ignition id actually prefer to just get rid of the whole interior harness and wire fuel pump and tail lights separate. Not sure if thats possible. I will leave out the acc wire , and ill have to follow the run wire back in the harness because th...
- Wed Aug 13, 2014 8:13 pm
- Forum: KA-T Tech. Advanced
- Topic: ignition toggle switch
- Replies: 14
- Views: 4681
Re: ignition toggle switch updated
Viper !! This is exactly the step im at i have my car turning over but no ecu signal » no spark. I recognized an orange wire coming out of the brown connector @ the ecu . Is this the orange wire ? My current setup is very simple. battery>Toggle > push button>Starter. So insert orange wire between to...
- Wed Aug 13, 2014 7:23 pm
- Forum: KA-T Picture Threads
- Topic: Supakat's Thread
- Replies: 1796
- Views: 473751
Re: Supakat's Thread
Hi supa i need some help getting my car running. I have a sepate push button start hooked up and the car turns over, but with no spark, because i am not using stock ignition at all. The ecu doesnt know to turn everything on because there is no key ignition. I blew up my vg30e and dont have a dd atm ...
- Wed Aug 13, 2014 6:51 pm
- Forum: KA-T Tech. Basic
- Topic: tru boost peeps
- Replies: 1
- Views: 921
tru boost peeps
Hello i am trying to help a friend amd need some help helping him. Gtst rb20 Almost completely stock Rom tune 14.5 psi Truboost and afr gauge's. Idles at 15+ and only richens to 14.5 at wot. Holds very consistenly umder wot. Constantly overheats it is his daily. im trying to talk him into ordering e...
- Mon Aug 04, 2014 8:34 pm
- Forum: KA-T Tech. Advanced
- Topic: ignition toggle switch
- Replies: 14
- Views: 4681
ignition toggle switch
hello i am in the process of starting my car for the first time n/a UPDATED if anyone could help me out i am in a tough spot. i blew ringlands on my vg30e pathfinder and do not have a running vehicle until i get my 240 going or swap in a new vg funds are tight atm found a vg30e for 425$ to my house.
- Sun Jul 27, 2014 5:35 pm
- Forum: KA-T Picture Threads
- Topic: Supakat's Thread
- Replies: 1796
- Views: 473751
Re: Supakat's Thread
hello supa, you said you needed to replace the motor mount, so is this a recommendation to NOT buy xcessives mounts aswell? I had plans to use thiers but might end up going with whiteline if you recommend
- Sat Jul 26, 2014 11:57 am
- Forum: KA-T Picture Threads
- Topic: not so legal street car build - canada
- Replies: 89
- Views: 24604
Re: ka-t street strip project-going NA until parts are colle
Yeah i put a set of 27x9.5" hoosier's on the back and lowered the car another 2". The tires are tucked 1/2". I picked up a bunch of parts in saskatoon aswell , dc sport 4-2-1 starter, seats and some other goodies
- Thu Jul 24, 2014 8:50 pm
- Forum: KA-T Picture Threads
- Topic: not so legal street car build - canada
- Replies: 89
- Views: 24604
Re: ka-t street strip project-going NA until parts are colle
Getting really frustrated with this forum. I have many posts, and still have to wait for mods to approve posts, i made my last post like 2 weeks ago!!
- Mon Jul 14, 2014 11:20 am
- Forum: Dyno Results
- Topic: 6466 28PSI
- Replies: 44
- Views: 27252
Re: 6466 28PSI
hah how much we talking here ?
- Sun Jul 13, 2014 8:37 am
- Forum: KA-T Picture Threads
- Topic: not so legal street car build - canada
- Replies: 89
- Views: 24604
Re: ka-t street strip project-going NA until parts are colle
thanks man , but I have a full bc valve train already ! a few cool things lately the dd has been getting some work done http://i988.photobucket.com/albums/af10/jake_thompson4/IMG_0351_zpsdc5ceacb.jpg free set of 275/40-17. 17's it is ! http://i988.photobucket.com/albums/af10/jake_thompson4/IMG_0354_...
- Fri Jul 04, 2014 2:52 pm
- Forum: KA-T Picture Threads
- Topic: Daigle’s S14
- Replies: 586
- Views: 224852
Re: Daigle’s S14 - LCA's extended notched boxed adj stops
yeah it might also be something to get used to if you've drifted the car before! I can imagine that would make things easier for sure
- Wed Jul 02, 2014 8:09 pm
- Forum: KA-T Tech. Basic
- Topic: previous owner's such curb, also frame, much twist.
- Replies: 2
- Views: 859
Re: previous owner's such curb, also frame, much twist.
well some s-chassis guys have frames that are out of wack and get away with it no problem, and when my panels are on with some tinkering I can get the body to look really nice without any effort. so im curious how itl drive. I can have the front end stripped in 20 minutes, and it is back together ag...
- Tue Jul 01, 2014 12:32 pm
- Forum: KA-T Picture Threads
- Topic: Daigle’s S14
- Replies: 586
- Views: 224852
Re: Daigle’s S14 - LCA's extended notched boxed adj stops
really cool fab work you've done here ! cant wait to see how the lca mods affect things
- Mon Jun 30, 2014 7:00 pm
- Forum: KA-T Tech. Basic
- Topic: previous owner's such curb, also frame, much twist.
- Replies: 2
- Views: 859
previous owner's such curb, also frame, much twist.
http://i988.photobucket.com/albums/af10/jake_thompson4/IMAG0547_zps98c89a34.jpg car is undergoing fuse/relay relocations, battery relocation, and partial tube front end. any tips for the relocations would be great, and on a scale of 1-10 how bad is my frame, have you seen worse? not sure how far I ...