Search found 304 matches

by mmmS13
Tue Mar 12, 2013 7:18 pm
Forum: KA-T Picture Threads
Topic: mmmS13's Backwards build.
Replies: 44
Views: 18284

Little update of whats been going on, gave my neighbor a ride in my car and did a small pull with a 350z. I had spark blowout like a mofo (1step colder plugs) they were great plugs for 9psi but up past 11psi they are poop so hopefully another step colder should do the trick. Also fixed some slack in...
by mmmS13
Tue Feb 26, 2013 12:49 pm
Forum: Other Videos
Topic: MEANEST LAUNCH EVER!!!
Replies: 10
Views: 8749

by mmmS13
Mon Feb 25, 2013 6:52 pm
Forum: Car Chat
Topic: So how exactly do you drift?
Replies: 21
Views: 11989

Like everyone else said go to an event. Also remember that noone is perfect, even good drifters can still spin out and mess up. The only way you can look like a fool is to show up with your car that just hit a curb the weekend before because you were "practicing". Just practice drifting in...
by mmmS13
Mon Feb 25, 2013 6:43 pm
Forum: KA-T Chat
Topic: How many miles have you been KA-T ?
Replies: 20
Views: 3642

Ive got about 4k miles since I went turbo. When I was n/a I drove it from San Diego to Maryland in 4 days with 220k on it lol
by mmmS13
Mon Feb 25, 2013 6:41 pm
Forum: On the Street
Topic: Me and my dad racing
Replies: 4
Views: 2671

Only thing I can say is :D :D :D :D :twisted: . Nicely done, I laugh at my dad when he rides in my car and he thinks its fast, im only near 300hp lol. I wish my dad would race me sometime, he drives slow like a grandma :?
by mmmS13
Mon Feb 25, 2013 6:35 pm
Forum: KA-T Tech. Basic
Topic: What is the proper way to replace Rear main oil seal?
Replies: 12
Views: 1497

I helped my dad replace his rear main seal in his Datsun truck since it was leaking. We did it the 2nd way and carefully pryed (pried? lol idk) it out carefully and tapped in the new one with the flat tip of an extension.
by mmmS13
Tue Feb 19, 2013 6:31 pm
Forum: On the Street
Topic: I knew V6 mustangs were slow...
Replies: 2
Views: 2163

I had no idea they were that slow. hahaha today just blew my mind
by mmmS13
Tue Feb 19, 2013 5:32 pm
Forum: On the Street
Topic: I knew V6 mustangs were slow...
Replies: 2
Views: 2163

I knew V6 mustangs were slow...

But DAM. I did 3 runs with a mustang this afternoon, 1st run wasn't even sure if I can count it a run. 70mph he downshifts twice and I leave my car in 5th and pulled a bus on him... 2nd run, 70 roll from 4th gear pulled a train on him. 3rd run, 60 roll 3rd gear. Somebody contact NASA this mustang ne...
by mmmS13
Sat Feb 16, 2013 8:16 pm
Forum: Chat
Topic: what do you do for funds?
Replies: 58
Views: 64871

I took a year off of college to work full time to get my car turbo'd. But I dont have a family to take care of and the only bill I had was an internet bill.
by mmmS13
Sat Feb 16, 2013 8:06 pm
Forum: On the Street
Topic: lol 350z down
Replies: 8
Views: 8959

Oh....My.....Goodness.... :twisted: I think you got him coach.
by mmmS13
Fri Feb 15, 2013 4:45 pm
Forum: KA-T Tech. Basic
Topic: Stock block Longevity Thread
Replies: 40
Views: 10035

I hope you guys dont mind me bumping an old thread, just wanted to add my setup. Engine: 92 Stock block (230k miles) Turbo: T3/T4 50 trim (.63 ar) PSI: 11psi (91 Octane) Tune: Enthalpy HP/TQ: 285/300tq? (guesstimation) Life Span: 7psi for 4 months, 11 psi for the past 3 months > Daily Driver What we...
by mmmS13
Wed Feb 13, 2013 10:39 pm
Forum: KA-T Tech. Basic
Topic: Random bouncing needles after Enthalpy Ecu?
Replies: 6
Views: 1102

Nope car doesn't buck or anything. Im gonna email them tomorrow (another tomorrow haha) I started drinking and don't want to email him a bunch of gibber jabber.
by mmmS13
Tue Feb 12, 2013 11:03 pm
Forum: Introductions
Topic: Howdy fellow Hooners.
Replies: 1
Views: 907

Welcome, glad to see another SoCal guy. Im like 30 min south from you :D
by mmmS13
Tue Feb 12, 2013 8:37 pm
Forum: KA-T Tech. Basic
Topic: Random bouncing needles after Enthalpy Ecu?
Replies: 6
Views: 1102

No conversion harness for me, and yes I did mean temp gauge haha I wrote that in class :? Ill send Martin an email tomorrow. Its kinda weird the temp gauge no longer bounces up towards hot it just kinda of fluctuates down a little then back to normal. On the way home from class today only the tach w...
by mmmS13
Tue Feb 12, 2013 2:12 pm
Forum: KA-T Tech. Basic
Topic: Random bouncing needles after Enthalpy Ecu?
Replies: 6
Views: 1102

Random bouncing needles after Enthalpy Ecu?

Hey guys random question just curious if this happens to anyone else? Im driving down the road on the highway cruising arond 80mph, I look at my Tach and my Thermostat and sometimes they randomly bounce up and down when on throttle and the thermostat dips low when off throttle. Im not really all tha...
by mmmS13
Tue Feb 12, 2013 11:55 am
Forum: On the Street
Topic: S13 11psi vs B6 S4 (stock?)
Replies: 5
Views: 2221

Thanks guys, it feels good to be quicker than an expensive fancy car. Sadly I payed the price a little bit, my boost gauge hose got burned some how and cracked a hole in the tube so my boost gauge doesnt work :( although I found the leak and for a temp. fix I taped it up and ordered a new hose to re...
by mmmS13
Mon Feb 11, 2013 7:14 pm
Forum: Car Chat
Topic: Daily driver ride height
Replies: 36
Views: 12615

^If I could rock my car that low, I possibly would. But then I never would have turbo'd it and left it for hard parking. It looks so dam good but I love boost too much.
by mmmS13
Mon Feb 11, 2013 6:57 pm
Forum: KA-T Picture Threads
Topic: mmmS13's Backwards build.
Replies: 44
Views: 18284

Yeah I think my iacv has gone to poop. I was talking to 500hpka240sx on xbox live and was telling me about cleaning it out. I may do that or just try to get my idle around 1100. a high idle wouldnt besuch a bad thing if it keeps it from stalling.
by mmmS13
Mon Feb 11, 2013 6:01 pm
Forum: KA-T Picture Threads
Topic: mmmS13's Backwards build.
Replies: 44
Views: 18284

I think my idle has been like that since NA, although it wasnt as bad until I went turbo. Like I couldnt stop in neutral from 40 mph ever since I bought the car.

ATL240 did you delete your egr? I used a block off plate and left the wiring stuff.
by mmmS13
Mon Feb 11, 2013 4:44 pm
Forum: On the Street
Topic: S13 11psi vs B6 S4 (stock?)
Replies: 5
Views: 2221

Thank you sir im surprised I took him, I wish he didn't have tinted windows so I could have seen his reaction lol
by mmmS13
Mon Feb 11, 2013 4:28 pm
Forum: KA-T Picture Threads
Topic: mmmS13's Backwards build.
Replies: 44
Views: 18284

LPime001 wrote:
Sup buddy,
Just saw your newest street kill. I guess you resolved your idle and fuel issue.
What was the problem?

Thanks man, I found a vacuum leak :p Idle is still a little sketchy but ill bump it up soon and all should be good.
by mmmS13
Mon Feb 11, 2013 2:24 pm
Forum: On the Street
Topic: S13 11psi vs B6 S4 (stock?)
Replies: 5
Views: 2221

S13 11psi vs B6 S4 (stock?)

So im heading home from class and a black S4 starts coming up on me aggressively so I move over a lane and let him pass. We get to a red light and we slow down. I downshift to an almost stop and the light turns green, slow start from 2nd and I hit boost with 1/4 throttle and shift out early (around ...
by mmmS13
Sat Feb 09, 2013 9:05 pm
Forum: Introductions
Topic: Hello
Replies: 8
Views: 2554

Welcome, I personally order(ed) a good amount of my parts from frsport and enjuku racing. For a cheap bov you could go with a 1g dsm bov.
by mmmS13
Thu Feb 07, 2013 2:42 pm
Forum: KA-T Picture Threads
Topic: hpipro4 S13 KA24DE-T Build
Replies: 199
Views: 51706

That my good sir is amazing wire work. So clean :D Are those MB Weapons I see? thanks!!! yes sir they sure are mb weapons 17x9 +18 all around I have the same wheels :D hah they look much better on your car. My cars black and I dont think they look as good on mine :? Edit* Do you have a sound clip o...
by mmmS13
Wed Feb 06, 2013 8:41 pm
Forum: KA-T Picture Threads
Topic: mmmS13's Backwards build.
Replies: 44
Views: 18284

Not a problem, glad I could help! I was lucky and my friend works at a welding place so he handed my intake over to a coworker and said "hey will you weld this to this".
by mmmS13
Wed Feb 06, 2013 6:07 pm
Forum: KA-T Picture Threads
Topic: mmmS13's Backwards build.
Replies: 44
Views: 18284

Image

Its just a simple tube I got from a hardware store. It has some flex but its pretty stiff

ATL240 hopefully that helps :D
by mmmS13
Wed Feb 06, 2013 5:36 pm
Forum: KA-T Picture Threads
Topic: hpipro4 S13 KA24DE-T Build
Replies: 199
Views: 51706

That my good sir is amazing wire work. So clean :D

Are those MB Weapons I see?
by mmmS13
Tue Feb 05, 2013 9:07 pm
Forum: KA-T Picture Threads
Topic: mmmS13's Backwards build.
Replies: 44
Views: 18284

http://i1191.photobucket.com/albums/z476/Ccaryk/S13interior_zps3c8f1f47.jpeg Current interior poor cracked dash :? On the drive home from class today I stopped at a light, and my car almost went poop on me. Would barely hold idle at 450rpms and seemed to struggle and would be rich between shifts, a...
by mmmS13
Mon Feb 04, 2013 6:31 pm
Forum: KA-T Picture Threads
Topic: mmmS13's Backwards build.
Replies: 44
Views: 18284

Little update*

With the start of the new year I bought myself a nice Nardi Steering wheel and raised my boost yesterday. I am now currently running 11psi and oh man did my turbo wake up. I finally got the feeling my car is fast. After class tonight Ill upload a picture of my interior.
by mmmS13
Mon Feb 04, 2013 6:23 pm
Forum: Introductions
Topic: Noob from Iowa
Replies: 1
Views: 846

Welcome, your power goal is definetly achieveable and realistic. No question is a stupid question just depends on how you ask it. :)