www.ka-t.org

the hose that is pictured under your throttle body is a vacuum for the idle air control and the air regulator for the cold start i was having the same issues when you hook it up make sure you reset your computer

i would just check and make sure it wasn't just a air bubble in the line

one quick question about the white bunny setup

can you still use your stock starter or do you have to use a truck starter also

first check the oil level, then check the oil sensor make sure that it is clipped in an tight. located next to the oil filter if you didn't know then if that okay drop the oil pump and make sure that is was primed when its was put on you will know as soon as you undo the four bolts holding it in if ...

thank you for the info

where is everyone getting there ARIAS pistons from not really finding a lot of places that i even see them i see JE, CP, wiseco, and stuff but no arias

i just didn't realize that there were so many space for what looks like where the rods connect

sorry to be such a noob but is this a actually ka crank

haven't seen one out of the block yet but i will soon when i start my build

welcome aboard and good luck with the swap and engine transplant

its not that bad as long as you have all the right tools available to use

just got done with that swap on my s13a

all done got the plugs wires and everything all buttoned up and timed it yesterday runs good and pulls good for a 150k motor from what i could tell the original engine was already swapped before i bought the car and the engine out of my parts car was the original because everything was still properl...

another thing that i have noticed is that if you did a recent timing chain on the car make sure that you put seals between the timing cover and the block it is a separate kit that you can get when you buy your timing kit for like 15 bux its cheap but a necessity

the 96-97 d21 pickups were switched to ODBII so stay away from them, you will want a 90-95 ka24e or de whatever suits you best

here are the only pics i have at the moment but i will get some more soon and i have a friend that is doing the silvia front end swap so i will be getting his 93 front bumper to get rid of the pignose http://i4.photobucket.com/albums/y112/outlaw-09/Cars010.jpg http://i4.photobucket.com/albums/y112/o...

good news everyone got here up and running today, still need to the plugs and wires she is running a little rough, still need to drill the holes for the five speed swap

yeah well it was worse than i thought check all the seals and buttoned everything up down low but still got low oil pressure and now it knocking so out with this engine and tranny and the five speed swap from my parts car should be up and running by early next week waiting for intake manifold gasket...

hey guys just picked up a 89 240sx fastback with 175k for 900 bones http://i4.photobucket.com/albums/y112/outlaw-09/Cars010.jpg http://i4.photobucket.com/albums/y112/outlaw-09/Cars011.jpg http://i4.photobucket.com/albums/y112/outlaw-09/Cars012.jpg and i will take some pictures from my house when i g...

was there something wrong with your trans you can use the stock one from your truck and it should work just fine saves you some time and some money