Search found 222 matches
- Fri Nov 05, 2010 6:22 pm
- Forum: ECU Tuning
- Topic: Stanza Ecu can´t connect, help!
- Replies: 60
- Views: 19915
I asked this before but i didn´t got a straight answer. To get consult from this ecu (U12) into my laptop, i need to solder the 5 wires to the ecu pins, plug the connector on the blazt cable and the usb, from the blazt cable, to my laptop, and with the right usb drivers i should get consult on the l...
- Mon Nov 01, 2010 5:36 pm
- Forum: ECU Tuning
- Topic: Stanza Ecu can´t connect, help!
- Replies: 60
- Views: 19915
- Fri Oct 29, 2010 4:22 am
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80211
- Sun Oct 17, 2010 9:16 am
- Forum: ECU Tuning
- Topic: 90-92 Stanza Ecu with consult (pictures)?
- Replies: 0
- Views: 815
90-92 Stanza Ecu with consult (pictures)?
Hi, like the title says, i´m looking for pictures of stanza ecus with consult, i know this probably has been covered here, but i didn´t found anything, and hybridka is down. This is the consult cable i will be using, and i´m about to order a stanza ecu. http://img338.imageshack.us/img338/9606/connec...
- Sat Oct 16, 2010 3:10 am
- Forum: ECU Tuning
- Topic: Stanza Ecu can´t connect, help!
- Replies: 60
- Views: 19915
Hi, i realized i have a 240SX ecu and not a stanza, i got to this conclusion because i know that a 240SX tune (bin) does not work properly on a stanza ecu and vice versa, so i used the tune i have on my stock ecu and placed it on the stanza ecu, and the engine was working well, this didn´t happened ...
- Thu Oct 14, 2010 3:48 pm
- Forum: ECU Tuning
- Topic: Stanza Ecu can´t connect, help!
- Replies: 60
- Views: 19915
I was just told that i will not get consult out of this ecu, because this is not a consult ecu, despite it has the tx and rx pins, it´s not supported by any tester! Here´s how i have it at the moment, http://img135.imageshack.us/img135/3171/ecuwires1.jpg http://img412.imageshack.us/img412/3166/conne...
- Thu Oct 14, 2010 11:49 am
- Forum: ECU Tuning
- Topic: Stanza Ecu can´t connect, help!
- Replies: 60
- Views: 19915
Do you guys know if i need to install a consult board on the stanza ecu, or i should be able to connect it to my laptop and get consult just by soldering the wires directly to the ecu pins like in the pictures above? I´m using a blazt cable and Nissan DataScan software! I´m still trying to make it w...
- Thu Oct 14, 2010 11:25 am
- Forum: SOHC KA-T
- Topic: Complete SOHC KA-T Turbo set up
- Replies: 9
- Views: 3375
- Wed Oct 13, 2010 7:04 pm
- Forum: ECU Tuning
- Topic: Stanza Ecu can´t connect, help!
- Replies: 60
- Views: 19915
- Wed Oct 13, 2010 5:00 pm
- Forum: ECU Tuning
- Topic: Stanza Ecu can´t connect, help!
- Replies: 60
- Views: 19915
- Wed Oct 13, 2010 3:59 am
- Forum: ECU Tuning
- Topic: Stanza Ecu can´t connect, help!
- Replies: 60
- Views: 19915
- Mon Oct 11, 2010 4:41 am
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80211
- Wed Sep 29, 2010 5:29 pm
- Forum: SOHC KA-T
- Topic: turbo ka24e oil pan and return line
- Replies: 7
- Views: 4453
- Tue Sep 28, 2010 7:18 am
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80211
Ok, so like i was running 460cc injectors and stock maf with good afr numbers i decided to upgrade to my z32 maf, and when i tryed a few tunes i got from hybridka, they where all idling very rich 10.0 afr and richer, so yesterday i decided to test the voltage to see if i had any wires connected the ...
- Sun Sep 26, 2010 2:53 pm
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80211
- Tue Sep 21, 2010 1:36 pm
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80211
I was searching for 280ZX pumps and found this one, http://fcpimport.com/products/nissan-en ... 0-028-0081
Can you confirm if this is the one i should use or should only use the Sealed Power Pump?
Can you confirm if this is the one i should use or should only use the Sealed Power Pump?
- Mon Sep 20, 2010 1:17 pm
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80211
Ok, so on saturday my spark plugs got toasted. i went to a couple of auto parts stores but they didn´t have them in stock, so i order it and pick them up today, after installed on the engine, it worked smooth again. Then i tested a tune i had here (460cc, stock maf), and i got these numbers, cold st...
- Fri Sep 17, 2010 1:58 pm
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80211
Mark, i found the oil pump part# you provided, a few post back, #224-41901, can you confirm, http://www.summitracing.com/parts/SLP-224-41901/ and is it complicated to install?
- Thu Sep 16, 2010 4:45 am
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80211
No, i haven´t replaced the oil pump yet, let me know the part #. It´s kind of hard for me to do a rebuild right now, all the parts i need, i have to order them from the estates, and they became expensive with shipping and customs costs. To be honest i forgot all about the oil pump, so i´m going to s...
- Wed Sep 15, 2010 9:50 am
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80211
- Wed Sep 15, 2010 4:39 am
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80211
- Tue Sep 14, 2010 11:51 am
- Forum: SOHC KA-T
- Topic: KA24ET Project!
- Replies: 254
- Views: 80211
Hi, i´ve been away for a while and only now i got some time to work again on the car. I want to solve my oil pressure problem and was hopping you guys could give any ideias! With 10w40 synthetic oil i got a very low pressure after warm up, 10/5 psi, then i changed to 15w40 synthetic, and the pressur...
- Sat Aug 28, 2010 3:46 am
- Forum: ECU Tuning
- Topic: SOHC tunes - share the love
- Replies: 22
- Views: 7234
Here´s the U12 KA24E xdf file,
http://www.mediafire.com/?o4kw97xjpokw15n
for those like me, that want to get consult out of the 89 240SX!
http://www.mediafire.com/?o4kw97xjpokw15n
for those like me, that want to get consult out of the 89 240SX!
- Thu Aug 26, 2010 3:16 pm
- Forum: ECU Tuning
- Topic: Stanza Ecu can´t connect, help!
- Replies: 60
- Views: 19915
- Thu Aug 26, 2010 1:38 am
- Forum: ECU Tuning
- Topic: Stanza Ecu can´t connect, help!
- Replies: 60
- Views: 19915
I decided to order the blazt consult cable + the female connector, and started looking online for my ecu diagram to confirm if the wiring is correct and to know which wire goes were so i can do the wiring into the female connector, and found some curious info. According to the numbers on my ecu lid,...
- Tue Aug 24, 2010 2:31 pm
- Forum: ECU Tuning
- Topic: Stanza Ecu can´t connect, help!
- Replies: 60
- Views: 19915
Ok, so after searching around, i think my best option is to make a cable with a serial plug on one end and a nissan female consult connector on the other, here´s a pic of the connector, http://a.imageshack.us/img830/458/femaleconsultconnector.jpg With this plug installed i can get any of this cables...
- Sat Aug 21, 2010 4:48 am
- Forum: ECU Tuning
- Topic: Stanza Ecu can´t connect, help!
- Replies: 60
- Views: 19915
- Sat Aug 21, 2010 2:33 am
- Forum: ECU Tuning
- Topic: SOHC tunes - share the love
- Replies: 22
- Views: 7234
I like the idea, here´s the ka24e xdf file,
http://www.mediafire.com/file/isi6c2cumum5eti/KA24E.xdf
If anybody want´s, i can upload my stock 240SX N/A tune, let me know!
http://www.mediafire.com/file/isi6c2cumum5eti/KA24E.xdf
If anybody want´s, i can upload my stock 240SX N/A tune, let me know!
- Fri Aug 20, 2010 3:14 am
- Forum: ECU Tuning
- Topic: Stanza Ecu can´t connect, help!
- Replies: 60
- Views: 19915
- Thu Aug 19, 2010 5:02 pm
- Forum: ECU Tuning
- Topic: Stanza Ecu can´t connect, help!
- Replies: 60
- Views: 19915