www.ka-t.org

Yeah i was excited to make my own harness but oh well. Ill have to disect the stock interior harness that runs to the rear of the car and back, only thing there is tail lights haha. And im not running the stock gauges, no radio ac heat and none of the stuff on the sides of the steering wheel or sign...

yes ! how do you like the mspnp airman ??

yeah all that work just to spray paint the interior lol. it should hold up I wont be crawling around back there. I found the #1 method for removing the tar is: clear a small area to the metal by any means, take a STURDY 1" wide puddy blade, push up against the spot you would like to remove, and...

http://i988.photobucket.com/albums/af10/jake_thompson4/10437783_10152160725870671_3155294015990339148_n_zps56066eea.jpg that was fast ! got the engine in should be running in a few weeks here, if i'm lucky ill get cash in time to buy a sh*t load of parts for my turbo setup, lots of good stuff in th...

ive really been wanting to try a set of arias 10.8:1 SOHC pstons in my de for some insane compression numbers. see if that will be enough to break the N/A record of 217whp with my built head and 100 octane, only problem I see is timing would be very dangerously picky with clearances.

thanks man ! and it is going to be sick! I found a shortblock with 70,000 kms on it picking I up on Saturday and dropping in the engine next weekend. my next step with the n/a project will be megasquirt

good to hear something so positive about precision, and that you will be posting updated results soon !

editedit

port match & 3 angle vj on stock valves

http://i988.photobucket.com/albums/af10/jake_thompson4/20140614_1824401_zps82d024b9.jpg http://i988.photobucket.com/albums/af10/jake_thompson4/20140614_1823091_zps3b06e99b.jpg http://i988.photobucket.com/albums/af10/jake_thompson4/20140614_1819551_zps3e79795b.jpg got some stuff done ! painted my in...

Wait up just an av joe s366??

Is your 366 a billet wheel ?

Enjuku has always done me good and never screwed me even shipping to canada. They could not price match my oil punp though. (N)

Also forgot to mention im not running a heater core

http://i988.photobucket.com/albums/af10/jake_thompson4/20140518_163959_zps2df2a893.jpg Today i was put in the garage screwing around and was looking to make some decisions on what to do with a few of the coolant lines on the intake side. I plan on buying an xcessive intake manifold, and i believe t...

Pursue your dreams , but im sure anyone would recommebd making sure you have reliable transportation (another running vehicle) before trying to take on a project. And if thays the case i recommend fixing the car so it runs n/a, then turboing it.

Dont ******* wreck it again . Beautiful car makes me wanna paint my sil80 white, think ill stay black though. Glad to see you fixed it not an everyday car and that you didnt break your bricks im soo scared to hurt mine.

http://i988.photobucket.com/albums/af10/jake_thompson4/Mobile%20Uploads/20140513_192354_zpsb92aaef8.jpg http://i988.photobucket.com/albums/af10/jake_thompson4/Mobile%20Uploads/20140513_192315_zps3a73f477.jpg http://i988.photobucket.com/albums/af10/jake_thompson4/Mobile%20Uploads/20140513_192341_zps...

Mentioned earlier was about running higher pressure isnt always good. However many people suggest welding up the piston oil squirters when you upgradeyour rods specifically because an h-beam catches oil and flings it to the cylinder walls. Is it badto weld up your oil squirters ? How much does it in...

Post an updated video of the pass, havent dealt with that stuff yet sorry bro

I have an aeromotive fpr and fuellab fuel filter both high quality.

I dont understand , whats that ?

Ill rev to about 73 or 74 , wow guess i dont have much to worry about after all. I was fairly concerned especially because of the lack of e85 where i am. None in the province at all. I suppose a 0.91 would be fairly responsive. Efeezi claimed an unspoken psi was achieved @ 4900 with a gt4202 1.00a/r.

So at thus point in time when you claimed the 0.96 was too laggy that was incorrect due to boost leaks ?

Bump change settings

I dont run felpro but from what i understand they are great. I have one actually. mls gaskets can be very picky in comparison and less reliable if they arent done right.

Perhaps its something to consider. I dont know how much more it would transfer vibrations etc than regular solid mounts. And for guys like islide or kedbmx aiming for 900 it almost seems nessecary. Id like to look into doing it to pioneer this setup but wait til i do a trans swap to save the machini...

I recently bought efeezi's old twinscroll t4 manifold and i was curious how many guys here are running t4 and what spool is like. Curious what t4 twinscroll 0.91 like any comparisons? Also does anyone know if, just for example, 0.88 t3, and 0.88 t4 would spool similar, Or is the t4 0.88 much larger?

Looking foreward to some more results from your setup

Ive been doing some thinking about setups like mine and rosado for example, the problems that the big hp ka guys have had is the block cracking between cylinders 2&3, rumored to be due to the engine mounts not dispersing the torque enough. I recently read up in a build where the guy had made an ...