no idle switch in haness?

Dream about your 240's turbo power in this forum.
Post Reply
datsunissan
Dreams of owning a 240!
Posts: 58
Joined: Tue Apr 17, 2012 8:11 am
Location: CT

no idle switch in haness?

Post by datsunissan »

Ok heres a question to stump you guys so there is no idle switch pigtail in my harness does anyone know what this would affect?
adamky
SuperMod
Posts: 3511
Joined: Wed May 31, 2006 6:40 am
Location: Louisville, KY

Re: no idle switch in haness?

Post by adamky »

I'm not even sure what an "idle switch" is...?
Wiseco/Eagle, JWT S1 cams, BC valve springs, PT5857, ID1700 injectors, SR20DET ECU w/ Nismotronic, COP conversion with LS ignition coils, etc, etc...
--> YouTube channel --> my build thread
Image
datsunissan
Dreams of owning a 240!
Posts: 58
Joined: Tue Apr 17, 2012 8:11 am
Location: CT

Re: no idle switch in haness?

Post by datsunissan »

its the input to the front of your tps NOT the wires going to the tps
adamky
SuperMod
Posts: 3511
Joined: Wed May 31, 2006 6:40 am
Location: Louisville, KY

Re: no idle switch in haness?

Post by adamky »

Can you post a pic? All the TPS sensors I've dealt with in my car have only had 3 wires going to them, so I'm still not sure what you mean.
Wiseco/Eagle, JWT S1 cams, BC valve springs, PT5857, ID1700 injectors, SR20DET ECU w/ Nismotronic, COP conversion with LS ignition coils, etc, etc...
--> YouTube channel --> my build thread
Image
User avatar
p00t
Encyclopedia-Nissan
Posts: 1170
Joined: Sun Aug 28, 2005 10:27 pm
Location: Detroit

Re: no idle switch in haness?

Post by p00t »

My guess is you have an AT TPS but a MT harness. If you are running a manual trans dont worry about it, the ECU uses the TPS signal for idle (<0.52v = TPS closed).
Current Experiment: Project Twin-Charge 2022
Post Reply