People with Magnecor wires, I need a favor.

smracing · Post by **smracing** » Tue Jan 06, 2009 4:10 pm

I need someone with magnecor wires to post a picture of the boot pushed all the way on the plug. (Outside of the motor)

foltzs14 · Post by **foltzs14** » Tue Jan 06, 2009 4:56 pm

I will post one tonight when I get off work.

foltzs14 · Post by **foltzs14** » Wed Jan 07, 2009 10:29 am

Here are some pics, hopefully they help and sorry for the poor quality. The plugs are BKR7E's and the boot comes down to the middle of the R on the plug.

smracing · Post by **smracing** » Wed Jan 07, 2009 2:43 pm

Thanks. For best results, the boot should touch the hex part of the plug. I was afraid they would be too short. I'm having trouble finding wires with good boots on them. The NGK's are a little better than the magnecors.

foltzs14 · Post by **foltzs14** » Wed Jan 07, 2009 2:44 pm

Oh I see, that is interesting.

480sx · Post by **480sx** » Wed Jan 07, 2009 4:40 pm

SM, do you have experience with the rest of the wire manufactures? Interesting information about the boot touching the hex, i can see it.

What wires do you recommend at this point?

smracing · Post by **smracing** » Thu Jan 08, 2009 7:29 am

none so far. My latest project requires me to run plug wires. I currently run COP.

Pacman · Post by **Pacman** » Thu Jan 08, 2009 10:07 pm

I haven't had a problem with my Magnecors, they were on both my old S13 and current S14. YOu should make your own wires though. Next time I need wires (which won't be a long time) I'll make them to get the excess wire gone (less reistance).

480sx · Post by **480sx** » Fri Jan 09, 2009 5:48 am

Build thread, or, what coils do you run?

smracing · Post by **smracing** » Fri Jan 09, 2009 9:38 am

CBR.