Ventura Racing @ dyno
-
- Dreams of owning a 240!
- Posts: 75
- Joined: Fri Nov 24, 2006 10:59 am
- Location: Kissimmee, Florida
Ventura Racing @ dyno
Went to the dyno today had a few issues that will be worked out soon but not a bad start 700hp @ 23psi MORE BOOST COMING SOON
http://www.youtube.com/watch?v=oBjFggMuhKU
http://www.youtube.com/watch?v=oBjFggMuhKU
Worlds Fastest KA24e Turbo (2004)
8.17 @164
Worlds fastest KA24E Nitros
Aspirated (2002)
9.63 @ 134
engine builder
tunner
Contact
321 250 9161 Michael (Ventura)
407 967 7895
8.17 @164
Worlds fastest KA24E Nitros
Aspirated (2002)
9.63 @ 134
engine builder
tunner
Contact
321 250 9161 Michael (Ventura)
407 967 7895
- NeverSatisfied
- Knows Some Stuff About 240's!
- Posts: 223
- Joined: Thu Sep 15, 2011 10:23 am
- Location: Arizona
-
- Dreams of owning a 240!
- Posts: 75
- Joined: Fri Nov 24, 2006 10:59 am
- Location: Kissimmee, Florida
the long block actually the same one from the old race car just refreshed and we went .20 on the block .
the only thing thats not off the shelf parts are the piston ,rods and cam .
custom cp pistons
custom carillo
arp head and main bolts
oem crank
oem oil pump
oem girdle
block .20
all clearance and assembly specs in house
cometic headgasket
ventura racing cam
oem intake valves
s.s exhaust valve oem size
nissan copper valve guides
in house ventura racing cyl head porting and polishing
datsun springs, locks, and retainers
fully cement motor head and block
cx racing engine oil cooler
peterson external oil filter
ventura racing oil reloctaor kit
custom gato 8 inj inake.
4 1600cc
4 2200cc
weldon fuel regulator
fastec mechanical fuel pump
custom exhaust manifold and all turbo fabrication by tito chassis
bullseye 80mm turbo 1.10 ar
jgs bov and race 60mm wastegate
specs new mini twin carbon clutch
libert 5spd trans
msd dig 4
microtech lt16
pcs dash logger and boost controller
the only thing thats not off the shelf parts are the piston ,rods and cam .
custom cp pistons
custom carillo
arp head and main bolts
oem crank
oem oil pump
oem girdle
block .20
all clearance and assembly specs in house
cometic headgasket
ventura racing cam
oem intake valves
s.s exhaust valve oem size
nissan copper valve guides
in house ventura racing cyl head porting and polishing
datsun springs, locks, and retainers
fully cement motor head and block
cx racing engine oil cooler
peterson external oil filter
ventura racing oil reloctaor kit
custom gato 8 inj inake.
4 1600cc
4 2200cc
weldon fuel regulator
fastec mechanical fuel pump
custom exhaust manifold and all turbo fabrication by tito chassis
bullseye 80mm turbo 1.10 ar
jgs bov and race 60mm wastegate
specs new mini twin carbon clutch
libert 5spd trans
msd dig 4
microtech lt16
pcs dash logger and boost controller
Worlds Fastest KA24e Turbo (2004)
8.17 @164
Worlds fastest KA24E Nitros
Aspirated (2002)
9.63 @ 134
engine builder
tunner
Contact
321 250 9161 Michael (Ventura)
407 967 7895
8.17 @164
Worlds fastest KA24E Nitros
Aspirated (2002)
9.63 @ 134
engine builder
tunner
Contact
321 250 9161 Michael (Ventura)
407 967 7895
I think in one of the 4+ threads he's posted about it, he mentioned 850whp as a starting point...NateDogg wrote:Sick numbers. Whats the power goal?
How is the cooling with the 'cemented head and block'?
R.I.P. 1990 Red Hatch - DOHC 5 speed // CP 9:1 - Eagle Rods - Clevite - ARP // Holset HX35 - 20psi daily - MSPNP2
8-bit wrote:You could spend your life building a ladder to the moon, or work for 5 years to pay for a trip.
-
- Dreams of owning a 240!
- Posts: 75
- Joined: Fri Nov 24, 2006 10:59 am
- Location: Kissimmee, Florida
Yeah 850 is our starting point goal and the engine temp actually stays very cold as long as the oil cooler dosnt go south on u we ran the car on idle for 15min s and the hottest it got was 132
Worlds Fastest KA24e Turbo (2004)
8.17 @164
Worlds fastest KA24E Nitros
Aspirated (2002)
9.63 @ 134
engine builder
tunner
Contact
321 250 9161 Michael (Ventura)
407 967 7895
8.17 @164
Worlds fastest KA24E Nitros
Aspirated (2002)
9.63 @ 134
engine builder
tunner
Contact
321 250 9161 Michael (Ventura)
407 967 7895
-
- Dont Question My Nissan Knowledge
- Posts: 829
- Joined: Fri Nov 20, 2009 3:12 pm
- Location: Jersey
-
- Dreams of owning a 240!
- Posts: 75
- Joined: Fri Nov 24, 2006 10:59 am
- Location: Kissimmee, Florida
were running methonal for fuel thank u on the complaments we worked hard for 5 year to finish the car . we plan on running on most local orlando, lakeland, westapalm events. e-town and acto nj. atlanta. maryland, uniongrove and pay a visits to route66 and maple groove and anyother really good event .goal is to beat 7:48 record for world fastest single cam of any 4 cly. but plans are to enjoy the car and be consistant in the 7:40's untill we build a really good cyl head. then well see were the ka will take us
Worlds Fastest KA24e Turbo (2004)
8.17 @164
Worlds fastest KA24E Nitros
Aspirated (2002)
9.63 @ 134
engine builder
tunner
Contact
321 250 9161 Michael (Ventura)
407 967 7895
8.17 @164
Worlds fastest KA24E Nitros
Aspirated (2002)
9.63 @ 134
engine builder
tunner
Contact
321 250 9161 Michael (Ventura)
407 967 7895