98 KA-T (UPDATE)
98 KA-T (UPDATE)
My build has changed a lot since i last posted. BUT i still have the car and its coming along smoothly! Follow me on Instagram at Jay_Turbosx, i have a small clip of me taking it out of the garage (without piping so we didnt have to push it)
The reason it has taken me so long is because i refined the setup and completely built the motor.
Car will be tuned on C16 and will be spraying water mist for intake charge+density
Mods
----------
Holset HE351CW with billet wheel (thanks supa)
DOC Race Top Mount
Xcessive Intake Mani
Tial 38mm wastegate
HKS Bov
Snow Performance water/meth kit
Id 1000cc injectors
Obx Racing Top Feed Rail
Act Clutch with Flywheel
LS2 Truck Coils
Q45 90mm TB
Aem Ems v2
Aem 5 bar map sensor
3" downpipe
Custom Intercooler & Piping
Aeromotive Fpr
Walbro 400lph
Flexalite Twin Elec Fans
Custom Catch Can
Quest Alternator
1 Piece Driveshaft
Weld Racing S71 Wheels for rear 15x8
Mickey Thompson ET Street Radials 26x11.50R15
Engine
-----------
Wiseco 9.0.1 Comp Pistons with thicker wrist pins .20 over
Manley Turbo Tuff I Beam Rods with arp 625+ rod bolts
Clevite Bearings
OEM Polished & Balanced Crank
Rb26 12mm Headstuds
Cometic Headgasket
Head is Race Ported & Polished
5 Angle Valve Job
Ferrea 1mm Oversized Valves
Ferrea Dual Valve Springs & Retainers
Ferrea Spring Seats & Stem Keepers
Going to tune the car as is on S13 cams and see what she gives. The plan is to have fun with the car on the stock trans/axles and diff until the funds are there to take the setup further. I already have the Z32 trans i just need to get the full axle + diff setup with the adapter kit. I also want to get me some kelford 272s. for now i am happy and will try and update when it gets tuned and drag raced
The reason it has taken me so long is because i refined the setup and completely built the motor.
Car will be tuned on C16 and will be spraying water mist for intake charge+density
Mods
----------
Holset HE351CW with billet wheel (thanks supa)
DOC Race Top Mount
Xcessive Intake Mani
Tial 38mm wastegate
HKS Bov
Snow Performance water/meth kit
Id 1000cc injectors
Obx Racing Top Feed Rail
Act Clutch with Flywheel
LS2 Truck Coils
Q45 90mm TB
Aem Ems v2
Aem 5 bar map sensor
3" downpipe
Custom Intercooler & Piping
Aeromotive Fpr
Walbro 400lph
Flexalite Twin Elec Fans
Custom Catch Can
Quest Alternator
1 Piece Driveshaft
Weld Racing S71 Wheels for rear 15x8
Mickey Thompson ET Street Radials 26x11.50R15
Engine
-----------
Wiseco 9.0.1 Comp Pistons with thicker wrist pins .20 over
Manley Turbo Tuff I Beam Rods with arp 625+ rod bolts
Clevite Bearings
OEM Polished & Balanced Crank
Rb26 12mm Headstuds
Cometic Headgasket
Head is Race Ported & Polished
5 Angle Valve Job
Ferrea 1mm Oversized Valves
Ferrea Dual Valve Springs & Retainers
Ferrea Spring Seats & Stem Keepers
Going to tune the car as is on S13 cams and see what she gives. The plan is to have fun with the car on the stock trans/axles and diff until the funds are there to take the setup further. I already have the Z32 trans i just need to get the full axle + diff setup with the adapter kit. I also want to get me some kelford 272s. for now i am happy and will try and update when it gets tuned and drag raced
Last edited by jaysol92 on Tue Jun 13, 2017 4:54 pm, edited 2 times in total.
- street_240sx
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 1923
- Joined: Sun Feb 10, 2008 7:31 pm
- Location: 520 AZ
Re: My build is almost done tell me what you think
How much power and looks like a solid set up
03 evo8 gsr: stroker 2.3
04 evo8 gsr: totalled
96 integra gsr: sold
89 s13 coupe: stock dohc, gt3076, megasquirt
started 3/15/08, running 1/18/09, finally turbo 2/9/14 lmfao
04 evo8 gsr: totalled
96 integra gsr: sold
89 s13 coupe: stock dohc, gt3076, megasquirt
started 3/15/08, running 1/18/09, finally turbo 2/9/14 lmfao
Re: My build is almost done tell me what you think
i wanna make anywhere between 380-420whp with 93 pump and water/meth. thanks man i will definately post up dyno vids when its all done.
- street_240sx
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 1923
- Joined: Sun Feb 10, 2008 7:31 pm
- Location: 520 AZ
Re: My build is almost done tell me what you think
I support water meth all the way. You want 400ish who on a stock block? I support stock motor builds, I'm still trying to squeeze 300whp out of mine (234/314 currently) you'll break 300 without a problem, 350+ will depend on how good the tuner is in my opinion but 400 is achievable keep us updated and post pix
03 evo8 gsr: stroker 2.3
04 evo8 gsr: totalled
96 integra gsr: sold
89 s13 coupe: stock dohc, gt3076, megasquirt
started 3/15/08, running 1/18/09, finally turbo 2/9/14 lmfao
04 evo8 gsr: totalled
96 integra gsr: sold
89 s13 coupe: stock dohc, gt3076, megasquirt
started 3/15/08, running 1/18/09, finally turbo 2/9/14 lmfao
Re: My build is almost done tell me what you think
As soon as she is running im gonna go crazy with videos and pics. Im way too excited haha
Re: My build is almost done tell me what you think
Car starts and idles nicely with the aem! God i cant wait to show you guys some vids. And holy cow ka's sound incredible open downpipe !!
- S14wayz
- Knows Some Stuff About 240's!
- Posts: 419
- Joined: Wed Apr 24, 2013 11:11 am
- Location: BC, Canada
Re: My build is almost done tell me what you think
looking forward to the vids
-
- Dreams of owning a 240!
- Posts: 68
- Joined: Fri Mar 28, 2014 11:40 am
- Location: frederick md
- Contact:
Re: My build is almost done tell me what you think
progress report?
1991 black 240sx R.I.P
1991 grey 240sx R.I.P
1991 240sx sold
1991 bmw e30 current
1991 grey 240sx R.I.P
1991 240sx sold
1991 bmw e30 current
Re: My build is almost done tell me what you think
everything in the setup is the same just decided to build the bottom end and up the power goal
heres the update
-manley turbo tuff i beam rods
-wiseco 9.0-1 comp pistons with upgraded wrist pins .20 over
-new oem oil pump
-rb26 arp head studs
-new oem crank ,micropolished,knife edged and balanced
-clevite mains and rod bearings
once i have some fun with car, i have a fully ported head im going to put on later with the z32 trans. but for now just the bottom end
heres the update
-manley turbo tuff i beam rods
-wiseco 9.0-1 comp pistons with upgraded wrist pins .20 over
-new oem oil pump
-rb26 arp head studs
-new oem crank ,micropolished,knife edged and balanced
-clevite mains and rod bearings
once i have some fun with car, i have a fully ported head im going to put on later with the z32 trans. but for now just the bottom end
- S14wayz
- Knows Some Stuff About 240's!
- Posts: 419
- Joined: Wed Apr 24, 2013 11:11 am
- Location: BC, Canada
Re: My build is almost done tell me what you think
rb26 studs, isn't that overkill for your goals or are you planning to go boost crazy now?? There like 14mm or something aren't they lol. This should be sweet
-
- Dreams of owning a 240!
- Posts: 68
- Joined: Fri Mar 28, 2014 11:40 am
- Location: frederick md
- Contact:
Re: My build is almost done tell me what you think
u should post some vids on youtube
1991 black 240sx R.I.P
1991 grey 240sx R.I.P
1991 240sx sold
1991 bmw e30 current
1991 grey 240sx R.I.P
1991 240sx sold
1991 bmw e30 current
-
- Knows Some Stuff About 240's!
- Posts: 363
- Joined: Sat Nov 02, 2013 5:00 pm
Re: My build is almost done tell me what you think
these are all empty threats without pics!! ;-)
Daily Driver: 2010 Toyota Tundra CrewMax 5.7 TRD
Project and DD: 1995 Nissan 240sx Frankenstein
I live and breathe physics, mechanics, motorsports!!
My build thread viewtopic.php?f=40&t=60602
Project and DD: 1995 Nissan 240sx Frankenstein
I live and breathe physics, mechanics, motorsports!!
My build thread viewtopic.php?f=40&t=60602
Re: My build is almost done tell me what you think
im planning on going boost crazy in my head i wanna run low 9s maybe even break 8s lol but that will happen when i stop running 93 octane in the future lol
- S14wayz
- Knows Some Stuff About 240's!
- Posts: 419
- Joined: Wed Apr 24, 2013 11:11 am
- Location: BC, Canada
Re: My build is almost done tell me what you think
Sounds beast. Lets see some picsjaysol92 wrote:im planning on going boost crazy in my head i wanna run low 9s maybe even break 8s lol but that will happen when i stop running 93 octane in the future lol
Re: My build is almost done tell me what you think
Looking for 380 - 420 hp and stock pistons? I have 260 and am contemplating forged.
-
- Knows Some Stuff About 240's!
- Posts: 445
- Joined: Fri Nov 11, 2011 1:26 am
- Location: long beach
Re: My build is almost done tell me what you think
i can send you an e85 map and a rough 91 map for aem v2 if youd like
in a datsun 510:
arias 8.8 .020
eagle rods
clevite bearings
ferrea/exhaust supertech/intake stk
supertech springs and retainers
bc valve guides v2 cams currently crower 288/288 (no good)
port and polish
arp head, main, rod bolts
osk timing
current: custom log mani, TIAL mvr,
later: ati SD garret gtx3071 currently in my possession looking for gtx3576
custom downpipe
lol:
arias 8.8 .020
eagle rods
clevite bearings
ferrea/exhaust supertech/intake stk
supertech springs and retainers
bc valve guides v2 cams currently crower 288/288 (no good)
port and polish
arp head, main, rod bolts
osk timing
current: custom log mani, TIAL mvr,
later: ati SD garret gtx3071 currently in my possession looking for gtx3576
custom downpipe
lol:
sdaigle240 wrote:beat that thing like it owes you money.
Re: 98 KA-T (UPDATE)
Car is tuned and finished will make a Dyno post soon