Okay so im in the process of building a ka24det so far i have a built block that has manley rods wiseco pistons, mayle clevit bearings and a balanced rotating assembly.
My goal is 400whp minimum and im new to the ka24de.
My questions are what turbo should i run that is capable of that power and still spools quickly? Do i need to port the head? Btw i also have bc dual valve springs. Do i need cams? I was planning on getting th xcessive intake. Please help me decide on this.
240sx build need guidance.
-
- Knows Some Stuff About 240's!
- Posts: 360
- Joined: Sun Oct 08, 2006 9:06 pm
- Location: Biloxi, MS
- Contact:
Re: 240sx build need guidance.
I'm leaving my head alone but have a lot of parts similar to your list now. I'm going to port my stock intake manifold instead of messing with the Xcessive Unit and spending that money elsewhere.
I'm going to run a BW EFR turbo and meth, tuning with Nismotronic, and shooting for a 400hp Daily Driver.
Good luck on your build and be sure to look at the builds on here that are currently going on.
I'm going to run a BW EFR turbo and meth, tuning with Nismotronic, and shooting for a 400hp Daily Driver.
Good luck on your build and be sure to look at the builds on here that are currently going on.