OBD2 intake manifold picture
OBD2 intake manifold picture
Does anyone have a picture of their OBD2 intake manifold or knows my question. I have a guy installing my motor for me but he says i'm missing a sensor on intake manifold. It is supposed to be located right on the #3 runner of the top portion of the manifold. I can clearly see that there are two threaded holes there that something can be screwed down to.
The thing is I bought a second intake manifold and it still doesn't have this sensor. So my question is does it really have a sensor there? There is a plug on the engine harness that we cannot find where it is supposed to plug into and it seems like it directs it right to the spot where the missing sensor is. My car cannot idle at the moment and runs really rough. All other sensors and vaccum lines are plugged but that.
I'll try to post a pic but my dam camera sucks right now.
The thing is I bought a second intake manifold and it still doesn't have this sensor. So my question is does it really have a sensor there? There is a plug on the engine harness that we cannot find where it is supposed to plug into and it seems like it directs it right to the spot where the missing sensor is. My car cannot idle at the moment and runs really rough. All other sensors and vaccum lines are plugged but that.
I'll try to post a pic but my dam camera sucks right now.
-
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 3161
- Joined: Wed Apr 18, 2007 7:28 pm
- Location: Fort WaltonBeach FL.
looks like fuel line mounting points.
arias 8.8.1,615 tomie inj.,clevite bearings,arp 10mm hs,z32 maf,jwt ecu,intake butterflies removed,all emissions removed,cx rad. dif dual fan controller,altima dual fans,fidanza fw,stage 3 clutch,solid d shaft,j30 rearend,energy suspension bushings,kyb struts,155 lbs weight reduction.
currently n/a.
He'll probably blow the motor, and then join the army of retards who hate on KA's for no good reason.
currently n/a.
He'll probably blow the motor, and then join the army of retards who hate on KA's for no good reason.
If you visit the page you can click on the part numbers and find out what they are.
http://www.courtesyparts.com/images/s14/s14_223-3.gif
http://www.courtesyparts.com/images/s14/s14_223-3.gif
-
- Encyclopedia-Nissan
- Posts: 1165
- Joined: Sat Feb 02, 2008 3:46 pm
- Location: northern nj
-
- 240sx Wannabe
- Posts: 172
- Joined: Mon Oct 13, 2008 11:10 am
- Location: Valdosta