Basic tech questions such as future setups, different turbo kits, car diagnosis, etc
RAMM
240sx Wannabe
Posts: 189 Joined: Tue Oct 09, 2007 8:22 pm
Location: The land of Chicago
Post
by RAMM » Sat Oct 02, 2010 2:42 pm
Hey guys im in a HUGE RUSH...and need 6 pressure plate bolts.
I don't know what size they are..can anyone shed some light on their sizing/threadpitch so I can order them up at ACE hardware or something.
Thank you very much!!
Alex-
S14 KA-T2871r
GET GRIP FEELING!!!
Eloquentlytrack.wordpress.com
tom550
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2100 Joined: Mon Dec 29, 2008 10:02 pm
Location: Albuquerque, NM
Contact:
Post
by tom550 » Sat Oct 02, 2010 3:06 pm
sorry but i have no idea.
but try calling a local nissan dealership parts department.
TinyT
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 3336 Joined: Thu Oct 12, 2006 5:55 am
Location: wisco
Post
by TinyT » Sat Oct 02, 2010 4:03 pm
heres an idea, take the flywheel to the hardware store and thread some bolts in, i cant think of it right now.
importdude
Dont Question My Nissan Knowledge
Posts: 503 Joined: Wed Aug 29, 2007 2:41 am
Post
by importdude » Sat Oct 02, 2010 8:03 pm
im almost positive its m8x1.25
RAMM
240sx Wannabe
Posts: 189 Joined: Tue Oct 09, 2007 8:22 pm
Location: The land of Chicago
Post
by RAMM » Sun Oct 03, 2010 2:28 am
Flip - aka Phil is hooking it up.
Thanks for the help.
S14 KA-T2871r
GET GRIP FEELING!!!
Eloquentlytrack.wordpress.com
trk240sx
240sx Wannabe
Posts: 131 Joined: Sun Feb 21, 2010 7:32 am
Location: Greenville, Virginia
Post
by trk240sx » Sun Oct 03, 2010 7:04 am
Dont just use any bolt....Im sure they are graded to a specific hardness.
redline240sx
Knows Some Stuff About 240's!
Posts: 346 Joined: Fri May 09, 2008 10:14 am
Location: Queens, NYC
Post
by redline240sx » Sun Oct 03, 2010 9:46 am
Ebay sells many sets of flyhweels, clutch, tranny bolts. Check em out
S13 KA-t
RAMM
240sx Wannabe
Posts: 189 Joined: Tue Oct 09, 2007 8:22 pm
Location: The land of Chicago
Post
by RAMM » Sun Oct 03, 2010 10:06 pm
Thanks Phil!!
KA = Good people/Community
S14 KA-T2871r
GET GRIP FEELING!!!
Eloquentlytrack.wordpress.com
Walperstyle
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 2517 Joined: Sat Jun 21, 2008 2:32 pm
Location: Red Deer
Post
by Walperstyle » Mon Oct 04, 2010 12:15 am
Yeah be careful what type of bolt. AKA, what its made from. (mostly) Everything you want is at home depot or a good hardware store when it comes to stuff like this. If I was really pressed for time, I'd do exactly what Tiny T said.