hi,
i'm new to the forum and have a quick question.
first the basics:
i'm swapping a 1995 240sx ka24de into a 1984 nissan 720.
i'm using MS2 for the ECU and have been building the engine harness from scratch. i attempted my first crank today and have no spark or tach signal. Upon review my notes i'm beginning to think i may have wired the distributor and coil wrong. (long nights/alcohol/tons of different schematics, may have been the reason). Anyway my question is does anyone know the pinout for the distributor and coil. The distributor i have is the one with the coil built in. (there are two plugs: 1 has 2 wires and the other has 6 wires) any help at all would be great!