!HELP! JGS Rubber Tranny mount

Basic tech questions such as future setups, different turbo kits, car diagnosis, etc
Post Reply
User avatar
Cute240sxGuy
240sx Wannabe
Posts: 172
Joined: Sat Oct 10, 2015 3:00 pm

!HELP! JGS Rubber Tranny mount

Post by Cute240sxGuy »

Having difficulty understanding why the rubber mount doesn't have 2 threaded holes on the top on the sides of the M10x1.5mm threaded stud to mount to the tranny crossmember? The POLY mount has the M10x1.5mm threaded stud AND 2 threaded holes, one on each side of the M10 stud.

Soooooooooooooo, the rubber mount is only held to the crossmember by a nut that will get threaded onto the M10 stud? Doesn't make sense to me...

Image
Last edited by Cute240sxGuy on Mon Mar 21, 2016 11:25 pm, edited 1 time in total.
User avatar
Cute240sxGuy
240sx Wannabe
Posts: 172
Joined: Sat Oct 10, 2015 3:00 pm

Re: !HELP! JGS Rubber Tranny mount

Post by Cute240sxGuy »

Appears that the M10x1.5mm is the only mounting spot on the cross member. Pretty beefy :) (It's not bolted down to the tranny yet in this picture)

Image
Post Reply