What's the right way to clean AEM Map sensor?

Basic tech questions such as future setups, different turbo kits, car diagnosis, etc
Post Reply
jaysol92
240sx Wannabe
Posts: 111
Joined: Sat May 11, 2013 12:08 pm
Location: Connecticut

What's the right way to clean AEM Map sensor?

Post by jaysol92 »

I have a can of electrical contact cleaner but don't wanna use it without knowing for sure. What do you guys do to clean your map sensors? I need to know for the connector side AND the air side. Thanks !
tuzzio
240sx Wannabe
Posts: 102
Joined: Thu Oct 29, 2015 7:02 pm

Re: What's the right way to clean AEM Map sensor?

Post by tuzzio »

I would call AEM and ask personally. They seem to be very fragile...my first one was defective out of the box.

Where in CT you from?
User avatar
p00t
Encyclopedia-Nissan
Posts: 1170
Joined: Sun Aug 28, 2005 10:27 pm
Location: Detroit

Re: What's the right way to clean AEM Map sensor?

Post by p00t »

Pretty sure you cant clean them, its a small hole with a diaphragm. Make sure the tubing to it isn't plugged/kinked.

It might be helpful to list the details of the problem, maybe someone has come across it before.
Current Experiment: Project Twin-Charge 2022
jaysol92
240sx Wannabe
Posts: 111
Joined: Sat May 11, 2013 12:08 pm
Location: Connecticut

Re: What's the right way to clean AEM Map sensor?

Post by jaysol92 »

tuzzio wrote:I would call AEM and ask personally. They seem to be very fragile...my first one was defective out of the box.

Where in CT you from?
Waterbury, and all is well with the sensor just tapped it on my finger with a towel and a little oil came out. Car is tuned and running great
Post Reply