Hi,
I am new to this forum. I am not a mechanic and have little knowledge, bare with me! I have a 1991 hardbody d21 with a KA24DE truck that the engine is shot. I have the engine from a 1990 240sx SOHC that I was told I can use for a swap. I was told that I need to take the intake from the truck engine and put it on the 240sx engine. Due to limited finances, i can not buy another engine or have my truck engine rebuilt. Can i do this swap? and if so, what kind of modifications will it take? I noticed that the crankshaft of the truck engine sticks out more than that of the other engine by about 1/2 inch. If I were to bolt the flywheel and torque converter to the 240sx engine crankshaft, it would be about a 1/2 inch shorted than if it was bolted to the other engine. This means that the torque converted will be 1/2 short going in the transmission. Have anyone have any thoughts about this? Please, forgive my inexperience and lack of knowledge! Thank you for any help you can provide!
Engine swap from a KA24DE to a 240sx KA24D
Re: Engine swap from a KA24DE to a 240sx KA24D
Sounds like more of a headache than you're going to want/afford.
- flip240
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 1942
- Joined: Thu Aug 19, 2004 1:09 am
- Location: Chicago, IL
Re: Engine swap from a KA24DE to a 240sx KA24D
I'm not familiar with the swap, but keep searching and asking, I'm sure there's info to be had!
- Phil - Concord Gray S14 - 339 rwhp, 340 ft-tq @ 12psi
Daily driven turbocharged KA24 for 10 years and counting. 2004-2014
My setup: KA24DE-T
Daily driven turbocharged KA24 for 10 years and counting. 2004-2014
My setup: KA24DE-T
Re: Engine swap from a KA24DE to a 240sx KA24D
Thank you for trying! I will continue the search. Have a great day!