Turbo coolant lines

Advanced discussion of improving KA-T components

Turbo coolant lines

Postby s14nep » Wed Feb 15, 2017 3:24 pm

Anyone know what thread size the heater core fitting is on the block? I'm deleting the heater core and using the port to run my am lines to the turbo. I'm using the drain plug on the driver side of the block as a supply and the thread pitch on that is 1/4 bspt and I found -8 adapters for this. But now I'm stuck trying to find info on the heater core thread. Any info would be great.
s14nep
NooB
 
Posts: 6
Joined: Mon Aug 29, 2011 1:08 pm
Location: palmdale, CA

Re: Turbo coolant lines

Postby tuzzio » Fri Feb 24, 2017 10:25 am

At worst come to worst, just get a barbed to AN adapter fitting and run a short length of rubber line.
tuzzio
Learners Permit
 
Posts: 18
Joined: Thu Oct 29, 2015 7:02 pm

Re: Turbo coolant lines

Postby s14nep » Tue Mar 21, 2017 8:41 am

Well i figured out the the thread pitch if anyone needs the info. The heater core hose end thread is 3/8" bspt not npts and the drain plug under the exhaust manifold is 1/4" bspt. Will post pics of my set up later.
s14nep
NooB
 
Posts: 6
Joined: Mon Aug 29, 2011 1:08 pm
Location: palmdale, CA


Return to KA-T Tech. Advanced

Who is online

Users browsing this forum: Bing [Bot], r3bkat and 10 guests