hi guys i recently sold my 2006 raven r1 and got me a 240sx i was wondering what were the approx numbers for this set up..
ka24e gt3076r car is tuned at 18psi
eagle h beam rods, 550cc, arias pistons, mod list too long
<a href="http://s50.photobucket.com/albums/f343/ ... 1411PM.png" target="_blank"><img src="http://i50.photobucket.com/albums/f343/ ... 1411PM.png" border="0" alt="Photobucket"></a>
<a href="http://s50.photobucket.com/albums/f343/ ... 1307PM.png" target="_blank"><img src="http://i50.photobucket.com/albums/f343/ ... 1307PM.png" border="0" alt="Photobucket"></a>
i saw this ka24det with the same turbo at 19psi but he has cams and 1000cc injectors. he dynod at 341 whp am i in the same general power output he is producing with his dohc? i should be about 40hp below him u think?
guy with similar set up : http://www.youtube.com/watch?v=nssVmeEwQNs
my 89 240sx gt3076r comparison
-
- Dont Question My Nissan Knowledge
- Posts: 829
- Joined: Fri Nov 20, 2009 3:12 pm
- Location: Jersey
- eazye2000
- Encyclopedia-Nissan
- Posts: 1358
- Joined: Tue Jan 16, 2007 4:32 am
- Location: Inverness, FL
- Contact:
Yeah don't push too much over 300 with those injectors.
Get some 740's and you can run that turbo to it's limits. Probably about 450 to the wheels maybe.
On my 3076R, I was right at 346whp at 18psi I think...
But yeah, probably around 300 to the wheels give or take a little bit. Not sure how that single slammer head flows with their cams; I don't know enough about them.
Get some 740's and you can run that turbo to it's limits. Probably about 450 to the wheels maybe.
On my 3076R, I was right at 346whp at 18psi I think...
But yeah, probably around 300 to the wheels give or take a little bit. Not sure how that single slammer head flows with their cams; I don't know enough about them.