z32 maf wiring
-
- Knows Some Stuff About 240's!
- Posts: 215
- Joined: Mon Sep 26, 2005 1:15 pm
- Location: gloucester, va
z32 maf wiring
I found this pic over on nico and I want to make sure this is the way you guys are wiring your z32 maf N62 into your DE's. I'm asking b/c tonight I will wire in my mafs
-
- Dont Question My Nissan Knowledge
- Posts: 787
- Joined: Wed Sep 21, 2005 9:41 am
- Location: Kentucky / Tennessee
I know this is an old post but are the maf signal and 12v wires just running from/to the wiring harness and maf plug or are they going elsewhere (like ignition) or something
kind of confusing cause the drawing has angled lines and #3 (the red one) looks like the wire is spliced in the middle and is running somewhere else besides the maf and harness
im gonna try to wire my maf up in the morning and any help would be appreciated
kind of confusing cause the drawing has angled lines and #3 (the red one) looks like the wire is spliced in the middle and is running somewhere else besides the maf and harness
im gonna try to wire my maf up in the morning and any help would be appreciated
- nismo200sx16
- Dreams of owning a 240!
- Posts: 52
- Joined: Mon Feb 20, 2006 8:08 pm
- Location: carlisle PA
no its just stright connections. wires go stright to the ecu. it just looks like that in the drawing caus some one drew it up in paint shop or some programe like it. so just cut your harness and wire it stright up. and sodder the wires.
sr20det powered s12 85
ka24det powered s14 95/98jdm front
ka24de powered s13 93
http://www.cardomain.com/ride/627008
http://www.cardomain.com/ride/2307235
ka24det powered s14 95/98jdm front
ka24de powered s13 93
http://www.cardomain.com/ride/627008
http://www.cardomain.com/ride/2307235
-
- Knows Some Stuff About 240's!
- Posts: 215
- Joined: Mon Sep 26, 2005 1:15 pm
- Location: gloucester, va
-
- NooB
- Posts: 5
- Joined: Sun Mar 19, 2006 3:59 pm
- Location: Dallas, Texas
Alright i wired my n62 maf exactly like this but my car idles like sht could it be that the down pipe has a leak? because it has a leak. can someone let me know what colors the actual wires are and what color goes to what thx need soon someone plz look at yours and let me know, and my exhaust smokes like sht also dont know why but it smokes a lot doesnt smell like oil or coolant, just smells like exhaust it's still an open pipe too.
-
- NooB
- Posts: 1
- Joined: Fri Sep 26, 2008 12:17 am
- Location: Houston
- Contact:
Well if your running an Ecu set up to run stock maf then it should be 02 in 05 out. If you have tuned ecu for z32 maf then it should be 02 in 02 out. Stock maf and stock ecu are o5 in and 05 out.
02in 05out= stk ecu +z32maf
02in 02out= z32ecu tune+z32maf (ecu tuned for z32maf)
05in 05out=ka24de ecu+ka24de maf
02in 05out= stk ecu +z32maf
02in 02out= z32ecu tune+z32maf (ecu tuned for z32maf)
05in 05out=ka24de ecu+ka24de maf
It is the same one I posted in your thread.
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel