ka-t 10psi hx35 stock block
-
- Knows Some Stuff About 240's!
- Posts: 226
- Joined: Thu Aug 30, 2007 5:16 pm
-
- Dont Question My Nissan Knowledge
- Posts: 530
- Joined: Wed Nov 07, 2007 2:32 pm
- Location: Cincinnati
Good looking car, should be enough power to really have some fun on the street.
2012 - S14 KA, Nismotronic, GTi-R T28 12psi, Meth, PSM HMIC, DW550cc, N62, S15 HLSD, Spec 3, Fidanza = 12.4 @ 110
2013 - 9.0 Wiseco/Manley, Nismotronic, GT2876R 23psi, Meth, PSM HMIC, 850cc, N62, S15 HLSD, Z32 Spec 3, D21 Fidanza = ??.? @ ??? 440whp/380wtq
YouTube Channel -> http://goo.gl/MZ5EE
-
- Knows Some Stuff About 240's!
- Posts: 226
- Joined: Thu Aug 30, 2007 5:16 pm
-
- Knows Some Stuff About 240's!
- Posts: 226
- Joined: Thu Aug 30, 2007 5:16 pm
running pretty rich, i messed with the TPS and found out i actually adjusted it wrong and i heard the dyno was reading about 10% low according to someone else that had their car dyno'd previously. dont know how accurate that is but yea. imma wait till i get my built block together and turn up the boost :>
- picsbypenny
- Knows Some Stuff About 240's!
- Posts: 363
- Joined: Thu Dec 09, 2010 7:47 pm
- Location: Dallas,TX
-
- Knows Some Stuff About 240's!
- Posts: 226
- Joined: Thu Aug 30, 2007 5:16 pm
-
- Driving Mom's Station Wagon
- Posts: 39
- Joined: Tue May 28, 2013 12:09 pm
- Location: jacksonville
Re: ka-t 10psi hx35 stock block
nice, when you plan on upping the boost?
-
- Driving Mom's Station Wagon
- Posts: 27
- Joined: Fri Jul 05, 2013 10:46 pm
Re: ka-t 10psi hx35 stock block
What's your setup?
Re: ka-t 10psi hx35 stock block
looking to get a similar setup pretty soon. hope i can pull those numbers on my ka. sweet kouki btw
- AFKOUKI
- Knows Some Stuff About 240's!
- Posts: 458
- Joined: Thu Aug 11, 2011 5:37 pm
- Location: Ft. Walton Beach
Re: ka-t 10psi hx35 stock block
what wheels are those? I like em
-
- Knows Some Stuff About 240's!
- Posts: 226
- Joined: Thu Aug 30, 2007 5:16 pm
Re: ka-t 10psi hx35 stock block
the set up is
stock ka motor
jgs t3 top mount
hx35
custom turbo back exhaust
z32 maf
beer can fuel rail
cx racing fmic
38mm tial wastegate
delphi 1000cc injectors
JWT tune
on 93 pump
the wheels are dai yoshihara wheels
also i am finishing up my ka built with forged internals going to run a base of 20psi and switched to a hy35 the old turbo decided to bleed all the oil into the intercooler and i didnt catch it till the motor started smoking and lost all compression
stock ka motor
jgs t3 top mount
hx35
custom turbo back exhaust
z32 maf
beer can fuel rail
cx racing fmic
38mm tial wastegate
delphi 1000cc injectors
JWT tune
on 93 pump
the wheels are dai yoshihara wheels
also i am finishing up my ka built with forged internals going to run a base of 20psi and switched to a hy35 the old turbo decided to bleed all the oil into the intercooler and i didnt catch it till the motor started smoking and lost all compression
- PairOfS14s
- 240sx Wannabe
- Posts: 127
- Joined: Thu Jun 14, 2012 6:37 pm
- Location: Cartersville, GA
Re: ka-t 10psi hx35 stock block
Damn I love those Champs!!!
Stock internals
Stock MAF
Stock FPR
370cc injectors
Walbro 255
EGAY FMIC
GT2871 @ 11psi
JWT ecu
Custom 2.5" turbo back exhaust
Stock MAF
Stock FPR
370cc injectors
Walbro 255
EGAY FMIC
GT2871 @ 11psi
JWT ecu
Custom 2.5" turbo back exhaust
- sdaigle240
- Belongs To The TOP CONTRIBUTING MEMBERS!
- Posts: 4670
- Joined: Wed Oct 17, 2007 9:53 am
- Location: CONN.
Re: ka-t 10psi hx35 stock block
direct hy vs hx comparison sweet! interested to hear your thoughts!
airman wrote:I'm all about spreadsheets. Bitches love spreadsheets.
schmauster920 wrote:I shall cast my own pistons in the sands of time, then forge them in the depths of hell.. as funds allow
hy35 18psi Build Thread: viewtopic.php?t=38784
RIP MJL best friend of 20 years and the man who showed me 240s