ka-t 10psi hx35 stock block

Dyno Sheets/Results Only! We have a separate forum about ECU Tuning and Theory
Post Reply
Yoshi_hito
Knows Some Stuff About 240's!
Posts: 226
Joined: Thu Aug 30, 2007 5:16 pm

ka-t 10psi hx35 stock block

Post by Yoshi_hito »

jholman05
Dont Question My Nissan Knowledge
Posts: 530
Joined: Wed Nov 07, 2007 2:32 pm
Location: Cincinnati

Post by jholman05 »

Good looking car, should be enough power to really have some fun on the street.
Image
2012 - S14 KA, Nismotronic, GTi-R T28 12psi, Meth, PSM HMIC, DW550cc, N62, S15 HLSD, Spec 3, Fidanza = 12.4 @ 110
2013 - 9.0 Wiseco/Manley, Nismotronic, GT2876R 23psi, Meth, PSM HMIC, 850cc, N62, S15 HLSD, Z32 Spec 3, D21 Fidanza = ??.? @ ??? 440whp/380wtq
YouTube Channel -> http://goo.gl/MZ5EE
Yoshi_hito
Knows Some Stuff About 240's!
Posts: 226
Joined: Thu Aug 30, 2007 5:16 pm

Post by Yoshi_hito »

thanks man, it is a lot of fun to drive around in the street... been running abnormally rich lately so i took the injectors out to get flow tested
ka-t240sx
Driving Mom's Station Wagon
Posts: 30
Joined: Wed May 16, 2012 9:49 pm
Location: canada

Post by ka-t240sx »

That seems a little low, but still great numbers and nice looking car!
You'll have tons of fun with that thing, Just wait till you up the boost a little :p
Yoshi_hito
Knows Some Stuff About 240's!
Posts: 226
Joined: Thu Aug 30, 2007 5:16 pm

Post by Yoshi_hito »

running pretty rich, i messed with the TPS and found out i actually adjusted it wrong and i heard the dyno was reading about 10% low according to someone else that had their car dyno'd previously. dont know how accurate that is but yea. imma wait till i get my built block together and turn up the boost :>
User avatar
picsbypenny
Knows Some Stuff About 240's!
Posts: 363
Joined: Thu Dec 09, 2010 7:47 pm
Location: Dallas,TX

Post by picsbypenny »

what part of texas are you in?
95 Silvia - KA24DET | 95 240sx - 2JZ

Build > viewtopic.php?t=57996
Yoshi_hito
Knows Some Stuff About 240's!
Posts: 226
Joined: Thu Aug 30, 2007 5:16 pm

Post by Yoshi_hito »

south padre island, ill actually be in the DFW later this month
Grant
Driving Mom's Station Wagon
Posts: 39
Joined: Tue May 28, 2013 12:09 pm
Location: jacksonville

Re: ka-t 10psi hx35 stock block

Post by Grant »

nice, when you plan on upping the boost?
antigravity
Driving Mom's Station Wagon
Posts: 27
Joined: Fri Jul 05, 2013 10:46 pm

Re: ka-t 10psi hx35 stock block

Post by antigravity »

What's your setup?
Elbowblk
Learners Permit
Posts: 18
Joined: Fri Sep 04, 2009 5:19 pm
Location: RI

Re: ka-t 10psi hx35 stock block

Post by Elbowblk »

looking to get a similar setup pretty soon. hope i can pull those numbers on my ka. sweet kouki btw
User avatar
AFKOUKI
Knows Some Stuff About 240's!
Posts: 458
Joined: Thu Aug 11, 2011 5:37 pm
Location: Ft. Walton Beach

Re: ka-t 10psi hx35 stock block

Post by AFKOUKI »

what wheels are those? I like em
Yoshi_hito
Knows Some Stuff About 240's!
Posts: 226
Joined: Thu Aug 30, 2007 5:16 pm

Re: ka-t 10psi hx35 stock block

Post by Yoshi_hito »

the set up is

stock ka motor
jgs t3 top mount
hx35
custom turbo back exhaust
z32 maf
beer can fuel rail
cx racing fmic
38mm tial wastegate
delphi 1000cc injectors
JWT tune
on 93 pump

the wheels are dai yoshihara wheels

also i am finishing up my ka built with forged internals going to run a base of 20psi and switched to a hy35 the old turbo decided to bleed all the oil into the intercooler and i didnt catch it till the motor started smoking and lost all compression
User avatar
PairOfS14s
240sx Wannabe
Posts: 127
Joined: Thu Jun 14, 2012 6:37 pm
Location: Cartersville, GA

Re: ka-t 10psi hx35 stock block

Post by PairOfS14s »

Damn I love those Champs!!!
Stock internals
Stock MAF
Stock FPR
370cc injectors
Walbro 255
EGAY FMIC
GT2871 @ 11psi
JWT ecu
Custom 2.5" turbo back exhaust
User avatar
sdaigle240
Belongs To The TOP CONTRIBUTING MEMBERS!
Posts: 4670
Joined: Wed Oct 17, 2007 9:53 am
Location: CONN.

Re: ka-t 10psi hx35 stock block

Post by sdaigle240 »

direct hy vs hx comparison sweet! interested to hear your thoughts!
airman wrote:I'm all about spreadsheets. Bitches love spreadsheets.
schmauster920 wrote:I shall cast my own pistons in the sands of time, then forge them in the depths of hell.. as funds allow
Image
hy35 18psi Build Thread: viewtopic.php?t=38784
RIP MJL best friend of 20 years and the man who showed me 240s
Post Reply