Ok so today was d day. We are on 3rd gear 91 pump gas. 47%injdty, 21psi. We had wheel spin on at out peak power of 591rwhp so we pulled some timing and set her at 586 until we can get the syncronic wastegate issues fixed. We can't get above 21psi. Dyno graphs are below.
Mph top of 3rd 132mph
Nastyka
-
- Driving Mom's Station Wagon
- Posts: 29
- Joined: Fri Apr 10, 2015 1:28 am
Re: Nastyka
Nice power.
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
Re: Nastyka
viewtopic.php?t=62155chad b. wrote:What size injectors is this?
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
-
- Driving Mom's Station Wagon
- Posts: 29
- Joined: Fri Apr 10, 2015 1:28 am
Re: Nastyka
300cc primary's
1650cc secondary
1650cc secondary
-
- Driving Mom's Station Wagon
- Posts: 29
- Joined: Fri Apr 10, 2015 1:28 am
Re: Nastyka
So we got the wastegate issue fixed. Installed a big daddy map in the ms3x, replaced the aem boost silinod with a ms unit, and now have our water meth system hooked up and functional. Going for retune this week on water meth and 28-30psi. Then draining the tank and moving for a 34-38 psi on c116 race gas. Hopefully the modifications that synapse had us do to their wastegate and the new controller will help us get the boost up.
Re: Nastyka
How much timing were you running on pump gas?