346 whp and 349 ft lb @ 15 psi. built ka with hx35
346 whp and 349 ft lb @ 15 psi. built ka with hx35
- 90 mm cp pistons. Pretty sure it's 8.5:1 cr
- eagle rods
- bc 272 cams, and springs (cams are not degreed, just turned back a couple few teeth on stock cam gears)
-id1000 top feed injectors
- radium fuel rail
- aeromotive fpr and stealth 340 pump
- clutchmasters fx400 6 puck Clutch
- stock intake mani
- ls coil packs w/msd 8.50mm spark plug wires
- full race twin scroll exhaust mani
- tial 50m bov
- tial 44mm wastegate
- megasquirt v3
- hx35/40 with 12cm^2 twin scroll exhaust housing
- nismo 2 way lsd
- stock tranny with over 300000 km and 7 years of pretty good abuse.
-94 pump gas
- bkr7e plugs gapped at .029
-approx 3600 ft above sea level if that makes any difference
Definitely forgetting a few things. Will post up as I remember
- eagle rods
- bc 272 cams, and springs (cams are not degreed, just turned back a couple few teeth on stock cam gears)
-id1000 top feed injectors
- radium fuel rail
- aeromotive fpr and stealth 340 pump
- clutchmasters fx400 6 puck Clutch
- stock intake mani
- ls coil packs w/msd 8.50mm spark plug wires
- full race twin scroll exhaust mani
- tial 50m bov
- tial 44mm wastegate
- megasquirt v3
- hx35/40 with 12cm^2 twin scroll exhaust housing
- nismo 2 way lsd
- stock tranny with over 300000 km and 7 years of pretty good abuse.
-94 pump gas
- bkr7e plugs gapped at .029
-approx 3600 ft above sea level if that makes any difference
Definitely forgetting a few things. Will post up as I remember
Last edited by ka-t240sx on Fri Jul 17, 2015 11:33 pm, edited 6 times in total.
- hotbox240
- Knows Some Stuff About 240's!
- Posts: 480
- Joined: Sun Sep 25, 2005 7:43 pm
- Location: Abbotsford, B.C
Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
Looks good, where ya located?
12.43 @ 115.06 - 05/2010
12.28 @ 117.61 - 08/2016
12.28 @ 117.61 - 08/2016
Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
Looks good. When you gonna turn it up to 25psi?
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
Looks good. When you gonna turn it up to 25psi? Sweet spot is around 28psi on an HX35.
12.96 @ 116.36 - 2.1 60ft - 11/2011
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
13.1 @ 114 - 2.3 60ft - 8/2012
KA24DE-T
Build thread/Blog
YouTube Channel
Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
I'm up in calgary alberta
won't run that much boost unless I switch to race gas. I keep taking out bearings and rods when I make lots of boost on pump fuel. I'm more than happy with it. It hauls like a freight train. I was hoping for 375-400 but my tuner and I decided to stick with a fairly conservative and safe tune until I run race fuel.
won't run that much boost unless I switch to race gas. I keep taking out bearings and rods when I make lots of boost on pump fuel. I'm more than happy with it. It hauls like a freight train. I was hoping for 375-400 but my tuner and I decided to stick with a fairly conservative and safe tune until I run race fuel.
-
- 240sx Wannabe
- Posts: 118
- Joined: Sat Aug 17, 2013 10:38 am
Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
Great numbers. Great to see another holset mafia member! Would you mind sharing your .MSQ?
Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
Kill3rwill wrote:Great numbers. Great to see another holset mafia member! Would you mind sharing your .MSQ?
Thanks haha. I love the holset.
msQ?
-
- 240sx Wannabe
- Posts: 118
- Joined: Sat Aug 17, 2013 10:38 am
Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
That's the tune file megasquirt uses. I'm curious how your timing map looks as it's hard to source a Dyno tuned map, all the ones available for reference are just people's guessing games
- mattheripper
- Knows Some Stuff About 240's!
- Posts: 250
- Joined: Sun Jul 05, 2009 4:23 pm
- Location: Lethbridge, AB
Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
Looks great man, I'm in Lethbridge, stoked there is another holset ka-t around!
R32 KA24DET HE341 MEGASQUIRT DIYPNP S13 suspension 18x10/12
Click it >>>> viewtopic.php?t=56032
Click it >>>> viewtopic.php?t=56032
- mattheripper
- Knows Some Stuff About 240's!
- Posts: 250
- Joined: Sun Jul 05, 2009 4:23 pm
- Location: Lethbridge, AB
Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
Oh fetch in a rhd too even eh? I'm interested in how early you start seeing boost with the twinscroll? I'm wanting to go with the fullrace mani as soon as I can, but want to make sure its worth it. Looks like right around 3500?
edit:
Actually just found your other dyno after looking for another hx35 comparable and it doesn't look like you gained too much spool up with the twin scroll jazz,
http://www.ka-t.org/viewtopic.php?f=3&t=58199
Is that right? I'm surprised you weren't twin scroll then too because it looks way good for a hx35. Let me know, super interested in your experience.
edit:
Actually just found your other dyno after looking for another hx35 comparable and it doesn't look like you gained too much spool up with the twin scroll jazz,
http://www.ka-t.org/viewtopic.php?f=3&t=58199
Is that right? I'm surprised you weren't twin scroll then too because it looks way good for a hx35. Let me know, super interested in your experience.
R32 KA24DET HE341 MEGASQUIRT DIYPNP S13 suspension 18x10/12
Click it >>>> viewtopic.php?t=56032
Click it >>>> viewtopic.php?t=56032
- hotbox240
- Knows Some Stuff About 240's!
- Posts: 480
- Joined: Sun Sep 25, 2005 7:43 pm
- Location: Abbotsford, B.C
Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
Street racing scene big in cow town?
12.43 @ 115.06 - 05/2010
12.28 @ 117.61 - 08/2016
12.28 @ 117.61 - 08/2016
Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
I don't know. Ive been out of the loop in the car scene for a good year and a half, too busy workin. I don't street race. Besides fooling round with a couple few buddies. I do know it's gone up since they got rid of out race track a few years ago and the closest place is Edmonton 3 hrs away.hotbox240 wrote:Street racing scene big in cow town?
Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
https://youtu.be/_6Fu58C2pyU
Here's another pull, increased boost up to 16-17 psi and played with the timing a little bit
Here's another pull, increased boost up to 16-17 psi and played with the timing a little bit
- torquefreaks
- Dreams of owning a 240!
- Posts: 89
- Joined: Wed Jul 21, 2010 10:30 am
- Location: Victoria
Re: 346 whp and 349 ft lb @ 15 psi. built ka with hx35
sick as ***** dude! im repping a hx40 ka on Vancouver island!