415tq 431hp @21lbs
https://m.youtube.com/watch?v=qb6NMHXeRSI
S256 AGP @21psi
-
- Knows Some Stuff About 240's!
- Posts: 323
- Joined: Wed Mar 28, 2007 9:46 am
- Location: south florida
S256 AGP @21psi
Last edited by rtm240sx on Fri May 20, 2016 11:05 am, edited 1 time in total.
ONLY REAL MEN STAY KA
- hotbox240
- Knows Some Stuff About 240's!
- Posts: 480
- Joined: Sun Sep 25, 2005 7:43 pm
- Location: Abbotsford, B.C
Re: S256 AGP @21psi
Looks like fun. This on pump gas?
12.43 @ 115.06 - 05/2010
12.28 @ 117.61 - 08/2016
12.28 @ 117.61 - 08/2016
Re: S256 AGP @21psi
Nice numbers! What compression and is this a t4 flange unit?
-Stock cams?
-Stock cams?
Project - Aries 8.8.1, Crower pro series rods, Kelford 272, 11mm head studs, Five0 2150cc, Magnafuel-4303, PTE6466
Daily - 95 stock block, ARP's, bigger ring gaps etc, 57Trim/63A/R, 550cc, z32 Maf, 93 octane /110 octane maps.
Follow me on Instagram @Prep_40oz
Daily - 95 stock block, ARP's, bigger ring gaps etc, 57Trim/63A/R, 550cc, z32 Maf, 93 octane /110 octane maps.
Follow me on Instagram @Prep_40oz
Re: S256 AGP @21psi
Interesting for sure, what hotside?
Also, what are your other specs. I'm running the 256sx with the .63AR myself.
Also, what are your other specs. I'm running the 256sx with the .63AR myself.
Re: S256 AGP @21psi
looking for a s366 t3 flange
Re: S256 AGP @21psi
His build list says Crower 264's and JWT gears.NateDogg wrote:Why your peak HP RPM so low?
S14 cams?
viewtopic.php?p=529135#p529135
Does it hold boost steady until redline, or does it drop off? I'm also curious if the cams have been timed and if so, what they are set to.
Wiseco/Eagle, JWT S1 cams, BC valve springs, PT5857, ID1700 injectors, SR20DET ECU w/ Nismotronic, COP conversion with LS ignition coils, etc, etc...
--> YouTube channel --> my build thread
--> YouTube channel --> my build thread